2006 NC Miata Drain Tube clearing How-To guide

Поделиться
HTML-код
  • Опубликовано: 5 сен 2024
  • How-To on cleaning drain tubes in a 2006 NC Miata.
    Tools needed are:
    14mm socket for chair bolts
    plastic trim pop tool/small screwdriver
    Trombone cleaner brush

Комментарии • 15

  • @gbsavc
    @gbsavc 4 месяца назад +1

    Thank you, best video on RUclips for this Miata model with the rear drains clogged.

  • @cybertruckmax2798
    @cybertruckmax2798 3 месяца назад +1

    I now have a 2007 Mazda Miata MX-5. Your video will help me, big time! Thanks

  • @johnnypetro9314
    @johnnypetro9314 2 года назад +3

    I don't have the soft top model, but I remember reading that you should only feed the trombone brush from top to bottom (as you do in the video) else you will damage the one-way flap. For example, on feeding the brush from the top, and then seeing the brush come out the bottom, don't pull it back to the top. Only one direction: from the top pushing down.

  • @josephthomas2226
    @josephthomas2226 Год назад +3

    you don't need to take the entire car apart. I have a 2006 Miata and all I do is put the trombone cleaner in the hole under the car, push it up until it loosens the clog, then pull it out. do it once or twice a year. If I don't do this every year my car floods with a hard rain.

  • @ST-qe6pp
    @ST-qe6pp Год назад

    Wow. What u don’t know can hurt you. Thanks so much for this vid. I just got an 06 grand touring. Getting the timing belt and tensioner replaced but this is the next task on the list

    • @jagboy69
      @jagboy69 Год назад +1

      You do know these cars DON'T HAVE TIMING BELTS right????? That belt is just the drive belt that runs the accessories like alternator, power steering pump and AC compressor.

  • @mattswanson2702
    @mattswanson2702 Год назад +1

    Great video, thanks!

  • @orozcocris93
    @orozcocris93 Год назад

    pretty sure you can disassemble the drain hose. if i remember correctly, just take the seatbelt off and right behind it sits the tubes. much cleaner and you reduce the risk of getting the noise lips stuck open

  • @dig-ud3ez
    @dig-ud3ez Год назад

    Thought you mentioned in the video you were going to post a video of the assembly

  • @wrandojoe4121
    @wrandojoe4121 11 дней назад

    I can't understand how Mazda can make a car that when is raining or washing the water has to enter inside the room before going out , creating all the problems that we know,and having many times the car flooded.

  • @jagboy69
    @jagboy69 2 года назад +1

    I'm guessing I don't have this issue on my wife's 2007 PRHT ????? ;-P

    • @nickerbocker1382
      @nickerbocker1382  2 года назад +2

      That car has a different style, but there are still drain holes.
      To get to those though you have to cut a little plastic screen that sits over them.
      They are a secondary setup as the hard top tries to seal the car completely, but if that seal wears out mazda put a similar system that mine and other soft tops have as a secondary water backup and they can also clog over time!

    • @jagboy69
      @jagboy69 2 года назад

      @@nickerbocker1382 Thanks for the heads up. The car only sees water at bath time, but I'll check them out.

    • @johnnypetro9314
      @johnnypetro9314 2 года назад

      @@nickerbocker1382 That's how I understand it too. I was also thinking the drain system is for when you get caught in the rain with the top down.