@@JuanGonzalez-hv6vs A lot of planning an measuring lol. Making cardboard replicas of the parts, based on the dimensions listed on the manufacturer's websites, really helped me get an idea of what I was doing
You are a total G❤. I hit some dead ends with 2 of my dream sff optiplex mobile gaming builds and you showed me the light And not only but blew it out the park. I also learned a lot of informational things. Thank you.
Glad to have shown you some things that inspired you to continue working on your Dream SFF Optiplex project! Send me some photos of your completed build when the time comes! I'd love to see them. Good luck with the builds!
@@WiltshireTutorials I'm putting together an 800 G2 with an i7 7700 that's out of control temp wise. Definitely needs to be delidded. That might even bring your temps even further down, or at least drop the fan speeds. Made my 8600K in a Loque Ghost S1 usable.
@@TheGameBench Hmmm, that's not a bad idea! Maybe I could try a delidded i9 9900 with a copper IHS and an L9x65 instead of the L9i! I measured, there is enough room in there for the L9x65 cooler!
@@WiltshireTutorials I was thinking about the L9x65 as well, but I saw a roundup from Hardware Canucks that compared a bunch of low pro coolers, including the L9x65, and it got beaten by the ID Cooling IS-50X. Which is also cheaper, and shorter. It's an L style cooler that overhangs the I/O but I don't think the rear fans would be an issue. I just bought one and I'm going to give it a go along with the delid. There's also the Dell XE2 cooler, which has a copper core that might work better than that L9i.
I must've missed that video from Hardware Canucks. I'll give it a watch to see the comparisons between the low profile coolers. Thanks for the suggestions!
Awesome madman build! I have a plan on making this exact same thing, just with a different layout, and 7080 instead (i7 10700). Idea is to get a 5700XT (it'll go where the PSU is, with a riser card), a modular 750W SFX PSU (I'll place it where the DVD drive is, super tight fit but I think it'll work, and a power plug extender). Only thing I'm questioning is CPU power limit (it's getting a beefier cooler so no worries with thermal limits). I know that the 10700 can get very toasty with it pulling over 200W at full load (yep, whole Dell PSU, instant on a Z490 board, ) and at 4.7GHz all core. Now, the PSU and the CPU cooler are more than competent to power the beast, but that Dell Q470 board is worrying me. It seems like Dell might limiting those CPUs as Intel intended, to 65W max, which means this i7's all core turbo is not being used. Also, how did you plug the PSU to the motherboard? This OptiPlex I'm looking at only has a dual 4 pin and a single 6 pin which means the CPU probably isn't getting enough juice.
I love these little machines, small but not big. I am a fan of the Optiplex SFF build(s). I personally own an Optiplex 3020 that has an Intel Core i5 4590, 4GB of ram, Intel HD 4600 Graphics, and 500 GB of HDD storage. I plan to upgrade it with a single slot GTX 1650 LP, 16GB of ram, and maybe throw an SSD in there.
Wow. It appears you are CPU-bound at this point. No more GPU upgrades will be necessary (or produce better results) until you can get a better processor... and I believe that would entail a mobo swap at this point because you're basically maxed out already... congrats, you won the Optiplex.
It MAY be possible to run an i9-9900 in MiniFlex over the i7-9700 that have in it now, which would help alleviate the bottleneck a bit. I still have my shunt modded A4000 that I'm going to test inside of MiniFlex to see how it does.
Wondered what your experience is with non-dell fans in Optiplex machines? I have an optiplex 5040, and I'm using an arctic CPU fan and 3 arctic case fans (only 1 case fan header - so I've used a 1-3 splitter to plug all 3 case fans into the one case-fan header). No matter what I do, all fans blaze at 100% - I've tried speedfan, HWInfo64, fancontrol, Argus, bios controls (which are basically max speed or system auto - either way they run at max speed) - all either have NO way to set a fan speed, or for the ones that do, setting the fan speed does nothing - they continue to run at max speed. I wouldn't mind, but they're just too loud and I don't need the insane cooling - the CPU especially runs cool even under load. I assume the motherboard might only be able to correctly control a dell certified CPU/Case fans - but I'm amazed that I can't find ANY way to control them. Maybe a way to undervolt them even? For reference I'm running an i5 6500T which doesn't go above 28degrees idle and 50degrees even on an intense load - so I certainly don't need the fans blazing! Have you had these issue?
I've used Noctua and Arctic fans on my Optiplex builds. Both work great and I'm able to control the fan speed to a degree. Dell has essentially nerfed controlling the fan speed. They give you 3 "fan states". The first is 0 RPM, the second is 1000 RPM and the third is 3308 RPM. There are no in between, that I've found. The Optiplex 5040 motherboard has 2 fans headers on it. One for the SYS_FAN and one for the CPU_FAN. I use a splitter for both headers. 2 fans on the CPU_FAN header and 3 on the SYS_FAN header. Also make sure that you're buying 4-pin PWM fans and splitters, not 3-pin fans/splitters. Some fan splitters will split off into only 3-pin fan connectors and you won't be able to control anything. The only program that I found I could use to control the fan speed automatically upon booting Windows was HWInfo64. The program is pretty easy to program a custom fan curve too.
@@WiltshireTutorials Thanks - my cpu fan is a 4 pin. But seems to go full speed no matter what. In terms of HWinfo64, I am able to set the 3 different speeds, but no matter what it says “inactive” instead of “active” - it also reports the fan speed to be anywhere from 500 - 6000 rpm, but listening with a decibel meter i’m 99% sure it’s running at a constant speed. I’ll take a look at your video around fixing overheating and see if I can configure HWinfo64 to honour any of the 3 speed levels 👍
I know that the xx40 and xx50 series have a more modern look, but have you ever worked with an xx10 series desktop? I have a couple of MT parts only cases that I thought about making Ryzen builds (possibly a 5700g until GPU prices get better) with NVME SSD. Back to the desktop idea, do you happen to know if the front I/O has a standard connector for that series? The reason that I got the MT was due to uncertainty of the front I/O, and PSU. You’ve shown how to solve the PSU issue, thanks.
I've never personally worked with that series of desktop, no. I don't think it has a standard connector for the front panel of that series. I am aware of adapters that you can buy to remedy the issue though. Similar to the PSU adapters I use
Amazing build! Could a similar build be done with a Optiplex 7020 sff? I have one I want to turn into a gaming PC with a full size gpu. Been thinking about doing an open air build with an upgraded gpu and psu, but now I'm curious if it's possible to keep it in og case?
Thanks! I'm glad you like MiniFlex! There really was no budget when it came to the project. More exploring the possibilities for the SFF Dell PCs to see what can and can't be done with them. You could do the same mods for much cheaper with different components and achieve some good results.
Wow, this is just utterly amazing. I had no idea such a thing was possible. I just copped an Optiplex 3050 SFF. I heard these guys can't use a standard atx psu, but I'm sure an adapter would work fine? After all, you did the exact same thing. My current psu for it is the proprietary 180w one. What are my gpu options? I was thinking about an RX 6400, or maybe GTX 1050. A 1050 would definitely be fit with some risers, you think? Would i need a stronger psu?
I'm glad you like MiniFlex! I didn't think it was possible myself! Lots of trial and error went into it. the TX500 that I used required the usage of an adapter, like you mentioned. My recommendation for GPUs, with the proprietary PSU, is to stay away from the RX 6400 due to the fact that it utilizes PCI-E 4.0 w/ x4 lanes. If you use the card on a PCI-E 3.0 board (The 3050 is PCI-E 3.0 only), it will affect the performance of that card quite a bit. I'd recommend a GTX 1650 LP (Low-Profile), if you can find one for a decent price. No risers would be required with a low-profile card. The ultimate low-profile card that would work the best is the RTX A2000. But, are typically not cheap and can be expensivel.
@@WiltshireTutorials Gotchu. Thanks for the tip! I've searched up some LP 1650's and they're a bit pricey. You think single fan 1050 would fit well? If not, a riser would suffice? They're quite small, but I'm worried they won't fit the slot since the fan might be too big of a fit, hence the inclusion of a pcie riser. It's 75w, the same as a 1650, so I assume it would be okay?
@@Ramble1234 I'd recommend getting the 1050Ti over the 1050. It'll give a little bit more performance and doesn't required PCI-E power. You can find them pretty cheaply too. Unfortunately, you're going to be looking at only low profile options with the SFF Optiplex. You'll have to do a little bit of cutting and epoxying to mount anything larger.
@@WiltshireTutorials Awesome thanks! Last question, if I wanted to upgrade the power supply, would a higher wattage tfx psu fit without modifications with an adapter? I'm sure a normal atx wouldn't.
Hey love your Optiflex series videos, got a build myself based on your previous build. Got my hd7870 in it and works good for my needs for now untill I cand find a gpu. Do you have any recommendations for cheap but good quality cpu fan (around 20ish usd)? Also wondering about case fans?
Glad to hear you like the OptiFlex series of videos! Flattered that you based your build off it too. I found these small dual fan CPU coolers on AliExpress for really cheap. I used it in the OptiFlex series at one point: www.aliexpress.com/item/4000329789577.html?spm=a2g0o.productlist.0.0.100f4114m5wL68&algo_pvid=0823586c-5f94-45d7-8374-82ba3460b9d3&aem_p4p_detail=20220610103626657083505540220149327477&algo_exp_id=0823586c-5f94-45d7-8374-82ba3460b9d3-29&pdp_ext_f=%7B%22sku_id%22%3A%2212000017734097692%22%7D&pdp_npi=2%40dis%21CAD%21%2118.36%21%21%218.21%21%21%402101e9ce16548825864193602e4a4b%2112000017734097692%21sea&gatewayAdapt=4itemAdapt www.aliexpress.com/item/1005003821738029.html?spm=a2g0o.productlist.0.0.100f4114m5wL68&algo_pvid=0823586c-5f94-45d7-8374-82ba3460b9d3&algo_exp_id=0823586c-5f94-45d7-8374-82ba3460b9d3-57&pdp_ext_f=%7B%22sku_id%22%3A%2212000027274487044%22%7D&pdp_npi=2%40dis%21CAD%21%2129.1%21%21%215.54%21%21%402101e9ce16548825864193602e4a4b%2112000027274487044%21sea If you want some cheap decent fans, I recommend the Arctic F8 and F9 fans
Don't be fooled. it is not possible to install the evga card if you still want to close the case. tested it myself, the card is about 5mm too high. even if I dismantle the black frame, the fan is still too high. strangely enough the case is never closed in the video with rtx. that should be said here.
Uhh... I have undeniable proof that I do have the side panel closed and it is running just fine? In fact, I have an extra 6mm in height for an even bigger GPU.
You can adapt the PSU to the proprietary motherboard connector by using a 24-pin to 6/8-pin adapter (depending on what model you have, it may be 6 or 8 pins) The CPU EPS power is the same and isn't proprietary.
This is soo nice, building something like this too only in a HP slimline case from 2010. Loads of similarities between this one and mine. I ended up using adapters and a regular DP / HDMI cable for the required speed. Ended up changing the whole pc; so new am4 mb and a ryzen 5 3600 with a rtx 2060. Waiting on final parts from China. How's miniflex doing currently!!
Thanks, Michel! I'm glad you like MiniFlex. Do you have any videos or photos of your PC build? I'd like to see them! MiniFlex is running strong still! It's my travel rig, so it only sees usage when I'm on the go. Looking at upgrading it with an i9 and my modded A4000
@@WiltshireTutorials Yes i do have some photo's, how could I send you those? Lovely to hear miniflex is getting some upgrades. Guess with the optiplex system another motherboard is not an option?
@@michelkastelein2880 If you have Instagram or Twitter, you can send the photos there! Optiplex motherboards are proprietary and have a unique shape that will not fit into your standardized case. Also, I wanted to see how far I could push the Dell hardware.
@WiltshireTutorials weird I didn't know optiplex ever came with a 24 pin. Mine has 2 power inputs, 8 pin and 4 pin and the atx power supply I bought for the gpu I added to it will not power it at all.
@@DM-so1eh You've got things a little mixed up here. The TX500 has a standard 24-pin that needed to be adapted to MiniFlex's motherboard. Also, if you're using a separate PSU to power the GPU, you're going to need to short the 24-pin cable to turn the PSU on to provide power to the GPU.
silverstone fx-500? that things going to heat up pretty quickly and when it does the fan will keep spinning and the whole thing will become a jet engine. oh, sorry, its TFX not FLEX. maybe those are quiter. are they?
@@WiltshireTutorials yeah, thought it was the 1u flex fx-500. have fx-350 and it is loud. why would silverstone put a fan in it that stays at full speed once the psu reaches certain temperature is beyond me. to be honest, the psu was warm to the touch in my inwin ms04 mini itx case, so better to have a turbine in the living room, aka htpc, then for the psu to overheat, right? hahaha. anyways, cheers. subbed.
@@WiltshireTutorials In my situation, if the PSU stays on, the PCs fans will stay on, so I need to turn it off when the PC turns off. If the PSU is turned on, the PC boots immediately. Is there a fix for this?
Hello, I'm looking to upgrade my optiplex 7060 mini tower (3040) with a gtx 1650 and if needed a PSU too. Will the GPU fit? And also which PSU should I get if I don't want to make any modifications.
Sorry about not getting to your comment. I somehow missed it! As for your questions, the 1650 should fit just fine. You should be able to run the 1650 without swapping out the stock PSU, due to the 1650 not having any PCI-E power slots on it. it will draw its power from the motherboard PCI-E slot instead. If you want to upgrade the PSU, you're looking at modifications. There's no way around that, unfortunately.
Did you notice a difference in temperature-readings when comparing the intact case, to you drilling the initial holes in the side-panel? I've bought an HP Prodesk 600 G5, and I'm thinking of possibly doing something similar once I get a graphics card in there (RX 6400, so nothing wild, but they seem to run pretty hot). The HP computer has a similarly poor ventilation design that Optiplex SFF has, so it's tempting to either drill holes or install a wire mesh window in the side-panel, but it's not a guarantee that it will actually help in practice, and might be unnecessary work (fluid-dynamics can be weird that way).
In my case, it absolutely helped bring down the temperature of the PC. The mesh grill may not be the best option due to its porousity. I went with drilled holes because it technically has better airflow that way
@@WiltshireTutorials Do you remember a ball-pack figure difference in C? (5, 10?). The mesh I was thinking about would be hardware mesh (wire-mesh grill) similar to what this youtuber did: ruclips.net/video/PQGliz4fliM/видео.html So basically a kind of wide-hole, strong connection mesh that retains the structural integrity of the removable casing side (and less like the speaker-mesh that a lot of PC cases have).
These DIY projects sometimes lead you to sourcing materials from unexpected places... Ultimately, I want to not have to deal with drill-fragments if I can help it. Despite careful cleaning you'll end up finding them in your foot a week or two later.
Are you referring to the Noctua CPU cooler? A processor and chipset are 2 different things. Just want to clarify. The chipset heatsink that I used is actually for a Raspberry Pi and it has thermal adhesive tape, so it just sticks on.
@@WiltshireTutorials yeah i was asking about the chipset😅. I bought the small heatsink but I had no idea how to stick it on, and on another video I saw someone was using hot glue to stick a way bigger heatsink to the motherboard. I was worried using hot glue would damage the motherboard then I saw ur vid, so I think ur method is way better than using hot glue.
@@ato_0261 I can't say I've ever heard of someone using hot glue to attach a heatsink before. Definitely not a good idea because I can't imagine that hot glue transfers heat efficiently. I would highly suggest using thermal adhesive tape.
It always baffles me how nasty people manage to make get components. I have a 2070 super that I got at launch, and it still looks mint even though I have never cleaned it. Took off some plastic bits the other day to check something out and there was a very minor bit of dust, but that's it.
I don't know how some people manage it. Same goes for myself. Just a slight bit of dust and can be taken care of in 5 seconds with some compressed air.
How'd you get those noctua fans hooked up to your system? I'm trying to reduce the temps for my system so I can go from a 1650 to a 3050 6GB LP but can't wrap my head around how to get the 80 and 40mm fans connected to the computer before I buy them, as I don't want to get something I can't use.
@@WiltshireTutorials Thanks so much for replying so fast. I just sent an order through for the splitters and fans themselves, but I've been wracking my brain to figure out how that would work. Hope I don't have to return anything. I'm working with a 5060SFF and looking at the Noctua 80mm for the front but it says to not connect it to the fan connector as its a 5v and it would get burnt out by that 12v connection (?). So what I've got so far is a SATA Y splitter and a 15 pin Sata to 4 PC fan connector (I'm hoping to get three fans in the back for exhaust, I saw someone with a 9020 do that). And I forgot to say, but amazing video. It makes me want to get into customizing the cases, it looks like a lot of fun.
@@MrOnepiece14 I recommend getting one that is a 5 way splitter with a connector dedicated to the CPU fan. The one I used was this one: www.amazon.ca/ThreeBulls-Cooling-Splitter-Adapter-Computer/dp/B07M5P7VHG/ref=sr_1_4?crid=3E5UI3R5ZDB5K&dib=eyJ2IjoiMSJ9.0Wa20GQf1zt73HFnOAb4scGU3SIFtNyt45cdH3zWyb7TJnZx7yRuTD-opEhyC_u0NVwFAq9dwPre5cgUpWXBdbzOffGhB4ujqkK_6kHnjT6_tJLrpSMdYz97u3lrhOVvitQvBT77B4Yx1z-nrQiwnwak0_kh0_Vx2b8fb4-br_79bmBRjXhae3r_Aq82ta7u22_THxRtGvMMMMp0skl3Pe5VE9vX2HxXsii_-7zkjTQOWrKIBD1JJR2usZx7hHKNnBAMxsFREzEv6ey_IFjE2HxU9DH5gizdCygRV-bdMVI.gbBsnZxmni4fslSCwsN990rH5r8521pGnB29MFl1KW8&dib_tag=se&keywords=fan+splitter&qid=1719247429&s=electronics&sprefix=fan+splitte%2Celectronics%2C103&sr=1-4 There is only one fan header on the SFF boards. The MT have two. Noctua had many variants of their fans. They offer 5V or 12V for different electronics other than PCs. You'll want the 12V version for a PC. Do not use a 5V variant fan as it will burn out the fan and possibly the motherboard. Glad you like the video and that I'm able to inspire you to pick up some case modding! Let me know if you have any more questions. I'm always around.
@@WiltshireTutorials Oh man, thank you. With that 5 way splitter I should still be able to have my shroud+heatsink powered still, right? Also would the Sata Y splitter cable and the 15 pin sata to fan connector still be necessary? And really, thank you for telling me about the 12V variant, I had no idea it existed. Gonna cancel the 5V immediately.
@@MrOnepiece14 No problem. I'm here to help! Are you referring to your CPU cooler? Not sure what you mean by "shroud+heatsink". If you feel like you want to add another fan at the bottom of the case, like I did, then you'll need a SATA power to 3/4-pin fan adapter, yes. You won't need the Y splitter, if you buy the one I linked.
If you plan on using my build as a template, it will not fit, depending on the thickness of the GPU. The edge of the GPU barely comes in contact with the end of the PSU on my build. It does help with GPI sag though
@@DeprivedofZZZ According to the Dell spec sheet, the best CPU you can use on the 7050 is the Intel Core i7-7820HQ. If you go with that CPU, you'll need DDR4 memory at 2400MHz
@@elizabethvazquezvazquez6702 there are a lot of factors to consider with high refresh rate gaming. What resolution are you playing at, how high of a refresh rate monitor do you have, what GPU are you using?
Although I like the idea, the PC is small enough to handle quite easily. So, a handle really isn't necessary. It could also affect airflow coming out of the top too
Maybe I could give you an idea on how to approach it; ditch the PCI-E bracket. I took mine off and used the holes in the PCB left over from the bracket to make my own. I used 90 degree angle shelf brackets from Rona (Canadian equivalent to Home Depot) to mount the card vertically. My thought process was "What if I make the card hang like a clothes line of sorts?". Not to mention, doing it this way will allow the card to intake fresh air, if you drill holes in the side panel. Of course, 3D printing a sled or mounting bracket would've been more elegant of a solution. But, I didn't have one at the time of filming the video.
@@WiltshireTutorials did you end up using a low profile PNY XLR8 Gaming 32GB (2x16GB) DDR4 DRAM 3200MHz (PC4-25600) CL16 1.35V Low Profile Dual Channel Desktop (DIMM) Memory Kit - MD32GK2D4320016LP
Keep in mind, Dell prebuilds of this generation max out at 2666MHz RAM. The motherboard won't know what to do with 3200MHz RAM and defaults to 2400MHz for some reason. There's also no way of changing the RAM frequency in the BIOS either. I used low profile DDR4 2666MHz from Kingston. I ordered them off of NewEgg.
Now there's a 4060 lp that is both cheaper and more powerful than the A2000 ;)@@WiltshireTutorials . Now that I got your attention. I happen to already have low profile gpu/wifi cards and a TFX power supply. Can you fit standard TFX power supplies or did you need to trim the case inside? I remember when I wanted to make a sleeper build inside a Lenovo Thinkcentre and turned out they used some propietary "quasi-tfx" format, and my TFX PSU would not fit without trimming metal (Which I don't have equipment for)
@@WiltshireTutorials I did manage to shrink down an HP ProDesk G1 600 TWR system into a slim matx case ($6). All of the original internals (mainboard, psu and hsf) somehow fit in the new casing; i stripped down the psu without its enclosure. Due to casing's slim profile my EVGA P106-100 6GB will not fit if installed in normal orientation, so i used riser 16x cable and screwed to case floor. In 180 degree orientation the case' side door could be closed normally. Speaking of video output, due to lack of display output from P106-100 so i reroute the display output through onboard hdmi/displayport using modified Nvidia driver and minor tweaks on registry. It is working nicely and quite powerful for an (almost) e-waste components. System spec: - Core i5 4590s (65W) - HP with Intel Q85 - DDR3 1600 8GB x4 - SSD m.2 sata (with adapter) - 320W PSU (Lite-On) - EVGA P106-100 6GB (mining GTX 1060) I'm pretty satisfied with the result by reuse these office PC; cheap but full of potential.
@@WiltshireTutorials Zalman 10-Port PWM Fan Hub Splitter for 4-Pin PWM & 3-Pin Non-PWM Fans, 12V SATA Connector Powers 10 Fans w/ 1 Motherboard Header (ZM-PWM10FH)did you use something like this to hook all the fans up
My God, you are a miracle worker who fits all that stuff on the sff-PC.
@@JuanGonzalez-hv6vs A lot of planning an measuring lol. Making cardboard replicas of the parts, based on the dimensions listed on the manufacturer's websites, really helped me get an idea of what I was doing
You are a total G❤. I hit some dead ends with 2 of my dream sff optiplex mobile gaming builds and you showed me the light And not only but blew it out the park. I also learned a lot of informational things. Thank you.
Glad to have shown you some things that inspired you to continue working on your Dream SFF Optiplex project! Send me some photos of your completed build when the time comes! I'd love to see them. Good luck with the builds!
What's most impressive is the fact that you're getting sub 70-80 degrees on that 9700 under a Noctua L9i... even with the duct.
Took a long time to get the thermals under control! Lots of drilling and testing to get things where I felt comfortable.
@@WiltshireTutorials I'm putting together an 800 G2 with an i7 7700 that's out of control temp wise. Definitely needs to be delidded. That might even bring your temps even further down, or at least drop the fan speeds. Made my 8600K in a Loque Ghost S1 usable.
@@TheGameBench Hmmm, that's not a bad idea! Maybe I could try a delidded i9 9900 with a copper IHS and an L9x65 instead of the L9i! I measured, there is enough room in there for the L9x65 cooler!
@@WiltshireTutorials I was thinking about the L9x65 as well, but I saw a roundup from Hardware Canucks that compared a bunch of low pro coolers, including the L9x65, and it got beaten by the ID Cooling IS-50X. Which is also cheaper, and shorter. It's an L style cooler that overhangs the I/O but I don't think the rear fans would be an issue. I just bought one and I'm going to give it a go along with the delid. There's also the Dell XE2 cooler, which has a copper core that might work better than that L9i.
I must've missed that video from Hardware Canucks. I'll give it a watch to see the comparisons between the low profile coolers. Thanks for the suggestions!
Ive loved the Optiflex journey LOL all the way till the end
OptiFlex may not be done. I'm not sure yet! MiniFlex isn't maxed out yet! There's some potential left for it!
@@WiltshireTutorials ay man I been supporting for years and wont stop anytime soon! Love these videos Ken’ !
Thanks man! I've been keeping an eye on your channel too! Love the grind man. I wish I was able to keep at it like you!
Luv these type of videos with Optiplexes!
I'm glad you like MiniFlex! Thanks for watching!
Loving your build and its sleeper design 🥰👍. Great work.
I'm glad you like MiniFlex! Thanks for watching
That 2060 was nasty dude lol
It sure was, it sure was. Definitely was in a home with someone who heavily smoked.
super professional!!!!!! great job!!!!!!!!!!!!!! u need more views!!!! upvoted!!
Glad you think so! I appreciate the support. Thanks for watching
Awesome madman build! I have a plan on making this exact same thing, just with a different layout, and 7080 instead (i7 10700). Idea is to get a 5700XT (it'll go where the PSU is, with a riser card), a modular 750W SFX PSU (I'll place it where the DVD drive is, super tight fit but I think it'll work, and a power plug extender). Only thing I'm questioning is CPU power limit (it's getting a beefier cooler so no worries with thermal limits). I know that the 10700 can get very toasty with it pulling over 200W at full load (yep, whole Dell PSU, instant on a Z490 board, ) and at 4.7GHz all core. Now, the PSU and the CPU cooler are more than competent to power the beast, but that Dell Q470 board is worrying me. It seems like Dell might limiting those CPUs as Intel intended, to 65W max, which means this i7's all core turbo is not being used. Also, how did you plug the PSU to the motherboard? This OptiPlex I'm looking at only has a dual 4 pin and a single 6 pin which means the CPU probably isn't getting enough juice.
I love these little machines, small but not big. I am a fan of the Optiplex SFF build(s).
I personally own an Optiplex 3020 that has an Intel Core i5 4590, 4GB of ram, Intel HD 4600 Graphics, and 500 GB of HDD storage. I plan to upgrade it with a single slot GTX 1650 LP, 16GB of ram, and maybe throw an SSD in there.
Glad you like it! Throwing an SSD in there will definitely breathe some life into the 3020.
@@WiltshireTutorials Thank you for the advice!
Dude the computer looks great! Very curious how you'd be able to even think about getting a 3060 in there.
Thanks! The answer to the 3060 would be; Very carefully 😅 There are some ITX 3060s out there. So, we'll see!
@@WiltshireTutorials Good luck!
Best SFF Build ever, I love it
Thank you! I'm glad you like MiniFlex! 😁
Wow. It appears you are CPU-bound at this point. No more GPU upgrades will be necessary (or produce better results) until you can get a better processor... and I believe that would entail a mobo swap at this point because you're basically maxed out already... congrats, you won the Optiplex.
It MAY be possible to run an i9-9900 in MiniFlex over the i7-9700 that have in it now, which would help alleviate the bottleneck a bit. I still have my shunt modded A4000 that I'm going to test inside of MiniFlex to see how it does.
Good to see you, homie
Thanks! Always good to be back with a new video!
Wow u grew a lot i use to watch u 12 years ago
That's a long time! Thanks for sticking with me for so long. My channel is essentially a mini time capsule at this point lol
He's alive!
I always come back 😋
Miniflex. :-) I like it. I've been wondering how to upgrade my 9020 even more. This looks like an interesting way to go.
Glad you like MiniFlex! Thanks for watching,
Wondered what your experience is with non-dell fans in Optiplex machines?
I have an optiplex 5040, and I'm using an arctic CPU fan and 3 arctic case fans (only 1 case fan header - so I've used a 1-3 splitter to plug all 3 case fans into the one case-fan header).
No matter what I do, all fans blaze at 100% - I've tried speedfan, HWInfo64, fancontrol, Argus, bios controls (which are basically max speed or system auto - either way they run at max speed) - all either have NO way to set a fan speed, or for the ones that do, setting the fan speed does nothing - they continue to run at max speed. I wouldn't mind, but they're just too loud and I don't need the insane cooling - the CPU especially runs cool even under load.
I assume the motherboard might only be able to correctly control a dell certified CPU/Case fans - but I'm amazed that I can't find ANY way to control them. Maybe a way to undervolt them even? For reference I'm running an i5 6500T which doesn't go above 28degrees idle and 50degrees even on an intense load - so I certainly don't need the fans blazing!
Have you had these issue?
I've used Noctua and Arctic fans on my Optiplex builds. Both work great and I'm able to control the fan speed to a degree. Dell has essentially nerfed controlling the fan speed. They give you 3 "fan states". The first is 0 RPM, the second is 1000 RPM and the third is 3308 RPM. There are no in between, that I've found.
The Optiplex 5040 motherboard has 2 fans headers on it. One for the SYS_FAN and one for the CPU_FAN. I use a splitter for both headers. 2 fans on the CPU_FAN header and 3 on the SYS_FAN header. Also make sure that you're buying 4-pin PWM fans and splitters, not 3-pin fans/splitters. Some fan splitters will split off into only 3-pin fan connectors and you won't be able to control anything.
The only program that I found I could use to control the fan speed automatically upon booting Windows was HWInfo64. The program is pretty easy to program a custom fan curve too.
@@WiltshireTutorials Thanks - my cpu fan is a 4 pin. But seems to go full speed no matter what. In terms of HWinfo64, I am able to set the 3 different speeds, but no matter what it says “inactive” instead of “active” - it also reports the fan speed to be anywhere from 500 - 6000 rpm, but listening with a decibel meter i’m 99% sure it’s running at a constant speed.
I’ll take a look at your video around fixing overheating and see if I can configure HWinfo64 to honour any of the 3 speed levels 👍
I know that the xx40 and xx50 series have a more modern look, but have you ever worked with an xx10 series desktop? I have a couple of MT parts only cases that I thought about making Ryzen builds (possibly a 5700g until GPU prices get better) with NVME SSD.
Back to the desktop idea, do you happen to know if the front I/O has a standard connector for that series? The reason that I got the MT was due to uncertainty of the front I/O, and PSU. You’ve shown how to solve the PSU issue, thanks.
I've never personally worked with that series of desktop, no. I don't think it has a standard connector for the front panel of that series. I am aware of adapters that you can buy to remedy the issue though. Similar to the PSU adapters I use
Please make a video on how u did this because I wanna follow ur steps Sensei
I basically showed how I did it in both MiniFlex videos. But I may do an in-depth guide in the future, if requested enough
It looks like you had some sort of mounting bracket for the graphics card, which one is that?
I made it to mount the card in a vertical orientation
Amazing build! Could a similar build be done with a Optiplex 7020 sff? I have one I want to turn into a gaming PC with a full size gpu. Been thinking about doing an open air build with an upgraded gpu and psu, but now I'm curious if it's possible to keep it in og case?
It may be possible. You'd have to do quite the large amount of modding to make it happen though
I'm impressed, not sure it's worth doing budget wise but very inventive.
Thanks! I'm glad you like MiniFlex! There really was no budget when it came to the project. More exploring the possibilities for the SFF Dell PCs to see what can and can't be done with them.
You could do the same mods for much cheaper with different components and achieve some good results.
What computer model are you starting out with? Dell 9020?
As I said at 0:13, it's an Optiplex 5070.
Wow, this is just utterly amazing. I had no idea such a thing was possible. I just copped an Optiplex 3050 SFF. I heard these guys can't use a standard atx psu, but I'm sure an adapter would work fine? After all, you did the exact same thing. My current psu for it is the proprietary 180w one. What are my gpu options? I was thinking about an RX 6400, or maybe GTX 1050. A 1050 would definitely be fit with some risers, you think? Would i need a stronger psu?
I'm glad you like MiniFlex! I didn't think it was possible myself! Lots of trial and error went into it. the TX500 that I used required the usage of an adapter, like you mentioned.
My recommendation for GPUs, with the proprietary PSU, is to stay away from the RX 6400 due to the fact that it utilizes PCI-E 4.0 w/ x4 lanes. If you use the card on a PCI-E 3.0 board (The 3050 is PCI-E 3.0 only), it will affect the performance of that card quite a bit. I'd recommend a GTX 1650 LP (Low-Profile), if you can find one for a decent price. No risers would be required with a low-profile card. The ultimate low-profile card that would work the best is the RTX A2000. But, are typically not cheap and can be expensivel.
@@WiltshireTutorials Gotchu. Thanks for the tip! I've searched up some LP 1650's and they're a bit pricey. You think single fan 1050 would fit well? If not, a riser would suffice? They're quite small, but I'm worried they won't fit the slot since the fan might be too big of a fit, hence the inclusion of a pcie riser. It's 75w, the same as a 1650, so I assume it would be okay?
@@Ramble1234 I'd recommend getting the 1050Ti over the 1050. It'll give a little bit more performance and doesn't required PCI-E power. You can find them pretty cheaply too. Unfortunately, you're going to be looking at only low profile options with the SFF Optiplex. You'll have to do a little bit of cutting and epoxying to mount anything larger.
@@WiltshireTutorials Awesome thanks! Last question, if I wanted to upgrade the power supply, would a higher wattage tfx psu fit without modifications with an adapter? I'm sure a normal atx wouldn't.
@@Ramble1234 The TFX PSU required some modding. I mentioned in the video that I had to remove some rivets to get the PSU to fit.
Awesome 👍
Thank you!
No problem
Hey love your Optiflex series videos, got a build myself based on your previous build. Got my hd7870 in it and works good for my needs for now untill I cand find a gpu.
Do you have any recommendations for cheap but good quality cpu fan (around 20ish usd)? Also wondering about case fans?
Glad to hear you like the OptiFlex series of videos! Flattered that you based your build off it too. I found these small dual fan CPU coolers on AliExpress for really cheap. I used it in the OptiFlex series at one point:
www.aliexpress.com/item/4000329789577.html?spm=a2g0o.productlist.0.0.100f4114m5wL68&algo_pvid=0823586c-5f94-45d7-8374-82ba3460b9d3&aem_p4p_detail=20220610103626657083505540220149327477&algo_exp_id=0823586c-5f94-45d7-8374-82ba3460b9d3-29&pdp_ext_f=%7B%22sku_id%22%3A%2212000017734097692%22%7D&pdp_npi=2%40dis%21CAD%21%2118.36%21%21%218.21%21%21%402101e9ce16548825864193602e4a4b%2112000017734097692%21sea&gatewayAdapt=4itemAdapt
www.aliexpress.com/item/1005003821738029.html?spm=a2g0o.productlist.0.0.100f4114m5wL68&algo_pvid=0823586c-5f94-45d7-8374-82ba3460b9d3&algo_exp_id=0823586c-5f94-45d7-8374-82ba3460b9d3-57&pdp_ext_f=%7B%22sku_id%22%3A%2212000027274487044%22%7D&pdp_npi=2%40dis%21CAD%21%2129.1%21%21%215.54%21%21%402101e9ce16548825864193602e4a4b%2112000027274487044%21sea
If you want some cheap decent fans, I recommend the Arctic F8 and F9 fans
It looks really cool
Glad you think the build looks good! Thanks for watching
Awesome. Latam love you.
Glad you like it. Thanks for watcing
Great video! But how did you extend your gpu video ports?
Using 90° angle adapters on the video ports on the GPU and panel mount extensions for both Displyport and HDMI
Nice build
Thanks! I'm glad you like it!
with that new psu did you have to use a 24 to 6 pin adapter for the mobo?
Yes. I adapted the 24-pin power cable
Don't be fooled. it is not possible to install the evga card if you still want to close the case. tested it myself, the card is about 5mm too high. even if I dismantle the black frame, the fan is still too high. strangely enough the case is never closed in the video with rtx. that should be said here.
Uhh... I have undeniable proof that I do have the side panel closed and it is running just fine? In fact, I have an extra 6mm in height for an even bigger GPU.
How did you place this board when the power supply doesn't have extra cables? Did you use a 6 to 8pin adapter?
You can adapt the PSU to the proprietary motherboard connector by using a 24-pin to 6/8-pin adapter (depending on what model you have, it may be 6 or 8 pins) The CPU EPS power is the same and isn't proprietary.
@@WiltshireTutorials thanks! ;)
@@moraiscode no problem! Thanks for watching
I have an optiplex 7040 sff. What are your max recommendations? Im still new to pc
For your build, I'd recommend starting off with a single slot low profile GTX 1650
This is soo nice, building something like this too only in a HP slimline case from 2010. Loads of similarities between this one and mine. I ended up using adapters and a regular DP / HDMI cable for the required speed. Ended up changing the whole pc; so new am4 mb and a ryzen 5 3600 with a rtx 2060. Waiting on final parts from China. How's miniflex doing currently!!
Thanks, Michel! I'm glad you like MiniFlex. Do you have any videos or photos of your PC build? I'd like to see them! MiniFlex is running strong still! It's my travel rig, so it only sees usage when I'm on the go. Looking at upgrading it with an i9 and my modded A4000
@@WiltshireTutorials Yes i do have some photo's, how could I send you those? Lovely to hear miniflex is getting some upgrades. Guess with the optiplex system another motherboard is not an option?
@@michelkastelein2880 If you have Instagram or Twitter, you can send the photos there! Optiplex motherboards are proprietary and have a unique shape that will not fit into your standardized case. Also, I wanted to see how far I could push the Dell hardware.
Love your work here, im trying to to upgrade my psu in my 3060 optiplex, do you know what model of psu i could use that would be at least 400W?
@@Toiyf. What kind of 3060 is it? Is it a Mini Towel (MT) or Small Form Factor (SFF)
@@WiltshireTutorials SFF
You'll need a TFX PSU. So, one from Silverstone or Apevia will do just fine
Hey man can you link the hardware you used for mounting the gpu?
Just simple 90 degree angle shelf brackets. Can find them at any hardware or home improvement store.
What psu did you use? Did you have to make your own connector?
0:30
You can either make a 24-pin adapter or you can buy one from Amazon or ModDIY
@WiltshireTutorials weird I didn't know optiplex ever came with a 24 pin. Mine has 2 power inputs, 8 pin and 4 pin and the atx power supply I bought for the gpu I added to it will not power it at all.
@@DM-so1eh You've got things a little mixed up here. The TX500 has a standard 24-pin that needed to be adapted to MiniFlex's motherboard. Also, if you're using a separate PSU to power the GPU, you're going to need to short the 24-pin cable to turn the PSU on to provide power to the GPU.
@WiltshireTutorials that answers my question, it's not an optiplex board.
silverstone fx-500? that things going to heat up pretty quickly and when it does the fan will keep spinning and the whole thing will become a jet engine. oh, sorry, its TFX not FLEX. maybe those are quiter. are they?
It's actually a fairly quiet unit. You can barely hear it when it's under load. It's nothing like the FLEX PSUs lol
@@WiltshireTutorials yeah, thought it was the 1u flex fx-500. have fx-350 and it is loud. why would silverstone put a fan in it that stays at full speed once the psu reaches certain temperature is beyond me. to be honest, the psu was warm to the touch in my inwin ms04 mini itx case, so better to have a turbine in the living room, aka htpc, then for the psu to overheat, right? hahaha. anyways, cheers. subbed.
What software do you use to make your graphs?
I used Adobe After Effects
All this just for the dell to stop working in 2 weeks, it's very impressive though
Still working till this day...
Did you have to use the PSU as the power switch?
What? No. I used the normal power button on the PC.
@@WiltshireTutorials In my situation, if the PSU stays on, the PCs fans will stay on, so I need to turn it off when the PC turns off. If the PSU is turned on, the PC boots immediately. Is there a fix for this?
Hello, I'm looking to upgrade my optiplex 7060 mini tower (3040) with a gtx 1650 and if needed a PSU too. Will the GPU fit? And also which PSU should I get if I don't want to make any modifications.
Sorry about not getting to your comment. I somehow missed it! As for your questions, the 1650 should fit just fine. You should be able to run the 1650 without swapping out the stock PSU, due to the 1650 not having any PCI-E power slots on it. it will draw its power from the motherboard PCI-E slot instead. If you want to upgrade the PSU, you're looking at modifications. There's no way around that, unfortunately.
Did you notice a difference in temperature-readings when comparing the intact case, to you drilling the initial holes in the side-panel? I've bought an HP Prodesk 600 G5, and I'm thinking of possibly doing something similar once I get a graphics card in there (RX 6400, so nothing wild, but they seem to run pretty hot). The HP computer has a similarly poor ventilation design that Optiplex SFF has, so it's tempting to either drill holes or install a wire mesh window in the side-panel, but it's not a guarantee that it will actually help in practice, and might be unnecessary work (fluid-dynamics can be weird that way).
In my case, it absolutely helped bring down the temperature of the PC. The mesh grill may not be the best option due to its porousity. I went with drilled holes because it technically has better airflow that way
@@WiltshireTutorials Do you remember a ball-pack figure difference in C? (5, 10?). The mesh I was thinking about would be hardware mesh (wire-mesh grill) similar to what this youtuber did: ruclips.net/video/PQGliz4fliM/видео.html
So basically a kind of wide-hole, strong connection mesh that retains the structural integrity of the removable casing side (and less like the speaker-mesh that a lot of PC cases have).
For me, it dropped temps by 19°C.
That kind of mesh grill would be absolutely fine. It's very porous. I thought you meant a fine mesh.
These DIY projects sometimes lead you to sourcing materials from unexpected places...
Ultimately, I want to not have to deal with drill-fragments if I can help it. Despite careful cleaning you'll end up finding them in your foot a week or two later.
@@OrinLinwe very true! Speaking from experience here
quite the upgrade
I'm glad you like it so far!
Does the fan fit without modification? i just want to upgrade the Cooling
Gotta be more specific. What cooling fan?
FLEX THAT OPTIPLEX!!!! Yeeeettt
We always be flexin' and yeeeetttin'
What is the heatsink size on that chipset and how do u attached it
Are you referring to the Noctua CPU cooler? A processor and chipset are 2 different things. Just want to clarify. The chipset heatsink that I used is actually for a Raspberry Pi and it has thermal adhesive tape, so it just sticks on.
@@WiltshireTutorials yeah i was asking about the chipset😅. I bought the small heatsink but I had no idea how to stick it on, and on another video I saw someone was using hot glue to stick a way bigger heatsink to the motherboard. I was worried using hot glue would damage the motherboard then I saw ur vid, so I think ur method is way better than using hot glue.
@@ato_0261 I can't say I've ever heard of someone using hot glue to attach a heatsink before. Definitely not a good idea because I can't imagine that hot glue transfers heat efficiently. I would highly suggest using thermal adhesive tape.
You should change the dell rtx 2060 bios that will solve the issue
I debated on doing so, but the NVidia cards are not as forgiving as AMD cards, if you brick them. Not a whole lot of info on the OEM Dell cards
It always baffles me how nasty people manage to make get components. I have a 2070 super that I got at launch, and it still looks mint even though I have never cleaned it. Took off some plastic bits the other day to check something out and there was a very minor bit of dust, but that's it.
I don't know how some people manage it. Same goes for myself. Just a slight bit of dust and can be taken care of in 5 seconds with some compressed air.
MINIFLEX LESGOOO
Let's gooooo! 🙌
Psu adapter link?
How'd you get those noctua fans hooked up to your system? I'm trying to reduce the temps for my system so I can go from a 1650 to a 3050 6GB LP but can't wrap my head around how to get the 80 and 40mm fans connected to the computer before I buy them, as I don't want to get something I can't use.
I used a fan splitter that allows me to connect multiple fans to the fan header on the motherboard.
@@WiltshireTutorials Thanks so much for replying so fast. I just sent an order through for the splitters and fans themselves, but I've been wracking my brain to figure out how that would work. Hope I don't have to return anything.
I'm working with a 5060SFF and looking at the Noctua 80mm for the front but it says to not connect it to the fan connector as its a 5v and it would get burnt out by that 12v connection (?). So what I've got so far is a SATA Y splitter and a 15 pin Sata to 4 PC fan connector (I'm hoping to get three fans in the back for exhaust, I saw someone with a 9020 do that).
And I forgot to say, but amazing video. It makes me want to get into customizing the cases, it looks like a lot of fun.
@@MrOnepiece14 I recommend getting one that is a 5 way splitter with a connector dedicated to the CPU fan. The one I used was this one: www.amazon.ca/ThreeBulls-Cooling-Splitter-Adapter-Computer/dp/B07M5P7VHG/ref=sr_1_4?crid=3E5UI3R5ZDB5K&dib=eyJ2IjoiMSJ9.0Wa20GQf1zt73HFnOAb4scGU3SIFtNyt45cdH3zWyb7TJnZx7yRuTD-opEhyC_u0NVwFAq9dwPre5cgUpWXBdbzOffGhB4ujqkK_6kHnjT6_tJLrpSMdYz97u3lrhOVvitQvBT77B4Yx1z-nrQiwnwak0_kh0_Vx2b8fb4-br_79bmBRjXhae3r_Aq82ta7u22_THxRtGvMMMMp0skl3Pe5VE9vX2HxXsii_-7zkjTQOWrKIBD1JJR2usZx7hHKNnBAMxsFREzEv6ey_IFjE2HxU9DH5gizdCygRV-bdMVI.gbBsnZxmni4fslSCwsN990rH5r8521pGnB29MFl1KW8&dib_tag=se&keywords=fan+splitter&qid=1719247429&s=electronics&sprefix=fan+splitte%2Celectronics%2C103&sr=1-4
There is only one fan header on the SFF boards. The MT have two. Noctua had many variants of their fans. They offer 5V or 12V for different electronics other than PCs. You'll want the 12V version for a PC. Do not use a 5V variant fan as it will burn out the fan and possibly the motherboard.
Glad you like the video and that I'm able to inspire you to pick up some case modding! Let me know if you have any more questions. I'm always around.
@@WiltshireTutorials Oh man, thank you. With that 5 way splitter I should still be able to have my shroud+heatsink powered still, right? Also would the Sata Y splitter cable and the 15 pin sata to fan connector still be necessary?
And really, thank you for telling me about the 12V variant, I had no idea it existed. Gonna cancel the 5V immediately.
@@MrOnepiece14 No problem. I'm here to help! Are you referring to your CPU cooler? Not sure what you mean by "shroud+heatsink". If you feel like you want to add another fan at the bottom of the case, like I did, then you'll need a SATA power to 3/4-pin fan adapter, yes. You won't need the Y splitter, if you buy the one I linked.
My graphics card is 9.5 inches, yours is 9, I hope mine fits in my 7050 sff
If you plan on using my build as a template, it will not fit, depending on the thickness of the GPU. The edge of the GPU barely comes in contact with the end of the PSU on my build. It does help with GPI sag though
@@WiltshireTutorialsdo you think the psu that you’re using will fit in my optiplex 7050 sff?
It will. You just need to make the same modifications that I did to the case of the 7050 SFF. You'll need to drill a few rivets out here and there.
@@WiltshireTutorialsnow I’m moving onto the cpu, for the sff optiplex 7050 what would be the best cpu?
@@DeprivedofZZZ According to the Dell spec sheet, the best CPU you can use on the 7050 is the Intel Core i7-7820HQ. If you go with that CPU, you'll need DDR4 memory at 2400MHz
Could this be attempted with a Dell Vostros 260s?
Possibly. Obviously different from the tower in this video. So, I can't say for certain if it would work or not
Why bother if you were above 60fps on 1044p already?
Because high refresh rate gaming is a thing and because I can do what hasn't been done before
Great updrade I'd like to do this with dell optiplex 3080 SFF...
Glad you like it! Thanks for watching. It's a difficult mod, I won't lie to you. Takes a lot of planning out in order to get things to fit!
Did you use a pcie x16 extender to connect GPU?
@@tedkima2969 PCI-E 4.0 X16 Riser was used in the video
Is that the optiplex 5050?
It's a 5070 SFF
@@WiltshireTutorials Thank you. I'm trying to find videos for upgrading a optiplex 5050. Ever venture into that terrain? Lol
Unfortunately, I haven't been able to play around with an Optiplex 5050 yet. So, I don't have any experience with them.
How about the PSU? I'm pretty sure the OEM PSU isn't enough
I swapped out the PSU to a TX-500 from Silver Stone.
@@WiltshireTutorials oh thank you, is there any alternative? I can't find TX500 in my country
@@alfelfTV I'm sure there is a local alternative to the SilverStone PSU. Just search for "TFX PSU" and see what's available in your country.
How this pc hold up?
Works great. I use it as a travel gaming rig/editing rig.
yo where do you think i can fine a optiplex like that but not with a 6th gen cpu
I would check schools, eBay or places like Craigslist, Gumtree or Kijiji
@@WiltshireTutorials Witch gen of cpu on optiplex is good for fortnite like 200fps i7 or i5
@@elizabethvazquezvazquez6702 there are a lot of factors to consider with high refresh rate gaming. What resolution are you playing at, how high of a refresh rate monitor do you have, what GPU are you using?
@@WiltshireTutorials uh didnt know that idk what gpu to use yet
Make a plexiglass RGB handle on top?
Although I like the idea, the PC is small enough to handle quite easily. So, a handle really isn't necessary. It could also affect airflow coming out of the top too
I’m trying to do this now with mine but with a low profile 4060 but cannot figure out how to make a bracket to mount it for the life of me
Maybe I could give you an idea on how to approach it; ditch the PCI-E bracket. I took mine off and used the holes in the PCB left over from the bracket to make my own. I used 90 degree angle shelf brackets from Rona (Canadian equivalent to Home Depot) to mount the card vertically. My thought process was "What if I make the card hang like a clothes line of sorts?". Not to mention, doing it this way will allow the card to intake fresh air, if you drill holes in the side panel.
Of course, 3D printing a sled or mounting bracket would've been more elegant of a solution. But, I didn't have one at the time of filming the video.
@@WiltshireTutorials thanks brother following your build to the t picked up the same gpu as you for 150 bucks
@@WiltshireTutorials did you end up using a low profile PNY XLR8 Gaming 32GB (2x16GB) DDR4 DRAM 3200MHz (PC4-25600) CL16 1.35V Low Profile Dual Channel Desktop (DIMM) Memory Kit - MD32GK2D4320016LP
@laynmdown glad I could help. Let me know if you have any more questions
Keep in mind, Dell prebuilds of this generation max out at 2666MHz RAM. The motherboard won't know what to do with 3200MHz RAM and defaults to 2400MHz for some reason. There's also no way of changing the RAM frequency in the BIOS either.
I used low profile DDR4 2666MHz from Kingston. I ordered them off of NewEgg.
Rx 6400 low profile , best video card for Dell Sff !
I'd say it's the RTX A2000 or A4000 SFF
Now there's a 4060 lp that is both cheaper and more powerful than the A2000 ;)@@WiltshireTutorials . Now that I got your attention. I happen to already have low profile gpu/wifi cards and a TFX power supply. Can you fit standard TFX power supplies or did you need to trim the case inside? I remember when I wanted to make a sleeper build inside a Lenovo Thinkcentre and turned out they used some propietary "quasi-tfx" format, and my TFX PSU would not fit without trimming metal (Which I don't have equipment for)
@@tadeuszmarin5704 I have one. I prefer the A2000 still. Doesn't require PCI-E power compared to the 4060 LP
Nice mods.
Thanks!
@@WiltshireTutorials I did manage to shrink down an HP ProDesk G1 600 TWR system into a slim matx case ($6).
All of the original internals (mainboard, psu and hsf) somehow fit in the new casing; i stripped down the psu without its enclosure.
Due to casing's slim profile my EVGA P106-100 6GB will not fit if installed in normal orientation, so i used riser 16x cable and screwed to case floor. In 180 degree orientation the case' side door could be closed normally.
Speaking of video output, due to lack of display output from P106-100 so i reroute the display output through onboard hdmi/displayport using modified Nvidia driver and minor tweaks on registry.
It is working nicely and quite powerful for an (almost) e-waste components.
System spec:
- Core i5 4590s (65W)
- HP with Intel Q85
- DDR3 1600 8GB x4
- SSD m.2 sata (with adapter)
- 320W PSU (Lite-On)
- EVGA P106-100 6GB (mining GTX 1060)
I'm pretty satisfied with the result by reuse these office PC; cheap but full of potential.
@@daviedlopulalan9882 Sounds like a neat mod! I'd love to see some photos of the PC and its mods!
ASUS Phoenix NVIDIA GeForce RTX 3060 V2 Gaming Graphics Card- PCIe 4.0, 12GB GDDR6 memory, HDMI 2.1, DisplayPort 1.4a, Axial-tech Fan Design, Protective Backplate, Dual ball fan bearings, Auto-Extreme you tried stuffing a 3060 in it yet
I have a low profile 4060 from Gigabyte I'm looking to test.
@@WiltshireTutorials Awsome!!! this is laynmdown not sure why its showing my wifes name lol
let me no how goes wich one you looking at
@@WiltshireTutorials my build like yours is getting closer waiting on the 2060 to get here and then i gotta drill some holes well alot of them lol
@@WiltshireTutorials Zalman 10-Port PWM Fan Hub Splitter for 4-Pin PWM & 3-Pin Non-PWM Fans, 12V SATA Connector Powers 10 Fans w/ 1 Motherboard Header (ZM-PWM10FH)did you use something like this to hook all the fans up
I think it was a DeepCool 8-way fan splitter that I had laying around
i think there was a super version of that 2060
@@4777512 EVGA never made a single fan version of the RTX 2060 Super. Just the RTX 2060
@@WiltshireTutorials makes sense, I Have fuzzy memories about it, even the cooler was diferent and 2.5 slots
@@4777512 all good! Sometimes there are way too many different models of GPUs lol
You should have gotten a rtx a2000
RTX 2060 is more powerful than the A2000. Plus, I like modding things. I already have an A2000 as well
Hi. I would like to know how you connect the mobo 6P + 4P power to the SilverStone TX-500 500W PSU. Thanks.
There is an adapter you can make or buy for the 24-pin cable. The CPU power 4-pin is the same.
@@WiltshireTutorials Thanks. Can a 300W PSU support this build?
No. Minimum 500W is needed.
@@WiltshireTutorials On the 24 to 6pin adapters I've found it says power supply doesn't turn off with power button. Has that been your experience?
That is correct. You can fix this by jump 2 pins together. Unfortunately, I don't remember which ones you need to bridge
5060 build? much cheaper. HELPPP someone smarter than me. I also need windows 11 for work
Would highly recommend not modding a PC for work.
a2000 might work
It would. Way too expensive though
dude, just get a proper size case.
Why when you already have one here? Also, Dell motherboards are a proprietary form factor. Therefore, they can't fit into your standard ATX case.
I have ner seem such a beat up card as tahat evga 2060 in my life. Not even my mining rigs one.
That's what happens when you smoke near your PC!
🎊 p̾r̾o̾m̾o̾s̾m̾
I'm sorry, I only speak English 😅
Horrible 😢😢
Sorry to hear you don't like MiniFlex. Any suggestions to make it better?