Joystick Calibrate of RadioLink T12D/T16D Transmitter
HTML-код
- Опубликовано: 11 сен 2024
- Joystick Calibrate of RadioLink T12D/T16D Transmitter
When there is any problem with the servo display of the transmitter or the servo value does not return to 0, check if the trim is set. If trim value is not set, but the problem still exists, please calibrate the joystick of the transmitter to solve the problem. If you have modified the stick mode, you may also need to calibrate the joystick.
How to calibrate the joystick of T12D/T16D Transmitter? Take T16D as an example.
Press Mode Button to enter MAIN MENU-- Transmitter Settings--STICK MODE.
The stick mode of this T16D is mode 2. Click CALIBRATION.
Please move the stick to the middle position.-- So I put the two joysticks to the middle position. And press Push button to confirm it.
Please move the joystick/knob to maximum/minimum stroke!-- So I push the two joysticks to the lower left corner, lower right corner, upper right corner, upper left corner respectively.
And Turn the knob, VRA and VRB, clockwise to the maximum, and then counterclockwise to the minimum.
The same method for VRC and VRD.
Then press Push button to confirm it. The calibration is done.
Go back to the home page. Press End button to enter MONITOR. Push the joysticks. All of them work well.
If you want to check the servo display of the knobs, you can enter AUX-CH, assign knobs to control any one channel. I assign VRA, VRB, VRC, and VRD to control channel 5 to channel 8.
Enter MONITOR-- turn the knobs, you can see all the knobs work well too.
That’s all about how to calibrate the joysticks of T16D and T12D.
For more details of T16D, please refer to the link:
www.radiolink....
For more details of T12D, please refer to the link:
www.radiolink....
If any question about RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn
is this radio good for tracked rcs like tanks excavators etc ?
Hi, sir. Yes. T16D and T12D is good for tracked rcs like tanks excavators etc. You can make your own video for each switch. Here is the link of T16D for your reference: www.radiolink.com/t16d If any question about RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn