Need more videos on this remote . I love mine as a tech nerd. Still learning what everything does.trying to fine tune curve for a vintage 1/18 losi mmt to get it to crawl without a programmable esc
Is a very good remote I bought it’s month ago I don’t know how to do everything on it yet and it helped my drag cars run more consistently prep and no prep 👍
Thanks for sharing with us such interesting videos. Kindly I have a Spectrum DX5C radio and I had been trying to use the throttle speed with the graph of the xlx2 but the graph of the xlx2 esc does not function on full throttle so I am trying to use the throttle speed, the travel or the expo but it is very difficult to find a combination and to know what is going on. I am trying to increase the launch between 40 to 60% on the graph and continue the graph until it gets to 100% in a linear position but the car is so powerful that it will keep on spinning till the end with the ultra soft compound tyres. I think one of the problems is that the car weights 6.7kg and the motor has over 10,700W that takes over 500A on 7s. I tried different type of graphs but up to now I didn't found the best one!
Tried to compare to spektrum in serch . The radio link came back and found out about launch control. Ive been happy witg gt5 and i probably wont replace the 7 rigs recievers at first.but could see this being my new goto.
This video is so freaking sweet. Immediately going to the channel to see what else i can find on this tx. For what you're end effect is, i.e. throttle ramp, theres another setting further up, THEXT I believe it is. It has like 5 values you can set to a number between 0 and 90%. That is a 5 point throttle curve too right? Any idea what that variable at top right of screen is?
Thanks for all your Video's they are very helpful. I am having a issue with the Trottle Ramp not working with the Trans Brake Button. Any info on what version firmware is needed? I have 2 Radio's one with version V6.8.2S and the other with Version V6.8.0 Any info would be a help. Thanks!
Thanks for your effort here. Question one: at the end when you set the two stage to 30% and 70%, I thought you were setting 70% max throttle but, actually, it looks like it went to full throttle so, I understand the 30% places the point of change over where 50% would be later in time, is the 70% not a reduced full throttle? Is it a reduced speed to full throttle instead? These things are a little bit unclear to me. Second question: both modalities, together, are switched on and off with a single toggle. Not clear how to select, which of the two will be utilized after exiting. Is it the last one displayed before exiting? I do not get a clear answer from RL on this. They refer me to their stock video which does not answer that question. Thanks!
Tgp1 is the range of the throttle pull that it switches from low speed to high. In the video, tgp1 is set to 30%. So from 0 to 30%, it ramps at the low speed of 0. Then 31 to 100% ramps at the high speed, of 70. You Only get to control a low and high speed.. where low controls up to the tgp1 value, then switches to the high speed for the 31-100% of throttle input.
I tried that on mine it work for the throttle speed ramp wen i pull the gas trigger works good but if i try it with the button like a trans brake it ignores the throttle ramp and goes 100% throttle wen i let go of the button instead of ramping in any help
I don’t have a drag car but this info is good for any vehicle. Thanks.
Need more videos on this remote . I love mine as a tech nerd. Still learning what everything does.trying to fine tune curve for a vintage 1/18 losi mmt to get it to crawl without a programmable esc
Is a very good remote I bought it’s month ago I don’t know how to do everything on it yet and it helped my drag cars run more consistently prep and no prep 👍
Awesome video. I can use that launch button as a nice clutch kick manoeuvre whilst driving.
🥸Thank you!!!! 🎊 🎈 I use this for my arrma felony after my receiver started acting weird. That launch button setup 🤌🏾🤌🏾 Thanks my guy. 😎
Thanks for sharing with us such interesting videos.
Kindly I have a Spectrum DX5C radio and I had been trying to use the throttle speed with the graph of the xlx2 but the graph of the xlx2 esc does not function on full throttle so I am trying to use the throttle speed, the travel or the expo but it is very difficult to find a combination and to know what is going on.
I am trying to increase the launch between 40 to 60% on the graph and continue the graph until it gets to 100% in a linear position but the car is so powerful that it will keep on spinning till the end with the ultra soft compound tyres.
I think one of the problems is that the car weights 6.7kg and the motor has over 10,700W that takes over 500A on 7s.
I tried different type of graphs but up to now I didn't found the best one!
Tried to compare to spektrum in serch . The radio link came back and found out about launch control. Ive been happy witg gt5 and i probably wont replace the 7 rigs recievers at first.but could see this being my new goto.
The Radiomaster mt12 is my new go to. Going to be a bit to get right, but it's a lot of radio for the price, and has a much faster latency
yes it can be done on v2 with firmware update.
This was an excellent video! Thank you!
Hope you have more vids on this radio i havnt even tried to setup gyro yet lol
This video is so freaking sweet. Immediately going to the channel to see what else i can find on this tx. For what you're end effect is, i.e. throttle ramp, theres another setting further up, THEXT I believe it is. It has like 5 values you can set to a number between 0 and 90%. That is a 5 point throttle curve too right? Any idea what that variable at top right of screen is?
Awesome video. Thank you for the info
Really helpful video. Thank you much
Thanks for all your Video's they are very helpful. I am having a issue with the Trottle Ramp not working with the Trans Brake Button. Any info on what version firmware is needed? I have 2 Radio's one with version V6.8.2S and the other with Version V6.8.0 Any info would be a help. Thanks!
Thanks for your effort here. Question one: at the end when you set the two stage to 30% and 70%, I thought you were setting 70% max throttle but, actually, it looks like it went to full throttle so, I understand the 30% places the point of change over where 50% would be later in time, is the 70% not a reduced full throttle? Is it a reduced speed to full throttle instead? These things are a little bit unclear to me. Second question: both modalities, together, are switched on and off with a single toggle. Not clear how to select, which of the two will be utilized after exiting. Is it the last one displayed before exiting? I do not get a clear answer from RL on this. They refer me to their stock video which does not answer that question. Thanks!
Tgp1 is the range of the throttle pull that it switches from low speed to high. In the video, tgp1 is set to 30%. So from 0 to 30%, it ramps at the low speed of 0. Then 31 to 100% ramps at the high speed, of 70. You Only get to control a low and high speed.. where low controls up to the tgp1 value, then switches to the high speed for the 31-100% of throttle input.
I tried that on mine it work for the throttle speed ramp wen i pull the gas trigger works good but if i try it with the button like a trans brake it ignores the throttle ramp and goes 100% throttle wen i let go of the button instead of ramping in any help
Same. It’s not consistent. Still can’t figure out the speed2 setting either without putting the car upside down
Have you figured this problem out yet??
@@DWTWilthave you figured it out yet
I think it’s pretty common sense why u cant use the throttle ramp u holding the trigger at 100 percent
Seems like u have to choose one function or the other. Not working together
Freaking mint! :)
Can I do this on a rc4gs v3 remote
Great content, bro!
You can’t do this on the V2 radio link