The BEST gun to paint a car in your GARAGE!
HTML-код
- Опубликовано: 7 сен 2024
- In this short video, we'll discuss this YT-160 lvlp paint gun and why this is absolutely the best gun to paint a car in your garage!
CHECK OUT MY OTHER HOW TO VIDEOS
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
paint gun and clear review playlist
ruclips.net/user/pl...
how to color sand and buff like glass
• Beginners guide to wet...
Autobody repair made easy
• Auto body repair made ...
how to prepare primer for paint
• How to prepare a car p...
using body filler to repair a dent
• Using body filler to r...
How to repair body damage on your car
• How to repair body dam...
My amazon affiliate store : Tools and materials categorized to help you find what your looking for
CLICK HERE
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
www.amazon.com...
As an Amazon Associate, I earn paid commissions from qualified puchases.
In this video
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
yt 160 lvlp paint gun 1.3 base/clear paint gun
amzn.to/3Qitr0z
finish1 fc710 spot panel clear
amzn.to/3M1ahd4
low cost disposable cup system 1.0
amzn.to/3PfhKWs
astro sun light
amzn.to/3YbFFtT
premium tack cloths
amzn.to/3FK35zw
prep solvent
amzn.to/3FCoRl7
raven latex gloves
amzn.to/3BsiGBb
3m paint mask
amzn.to/3UP7NQP
70% isopropyl alcohol
amzn.to/3uCCy0F
If you find this video helpful be sure to let me know in the comments. I welcome your feedback and questions
SUPPORT THE CHANNEL
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
LIKE AND SHARE VIDEOS
SUBSCRIBE!
COMMENT!
AFFILIATE LINKS!
www.amazon.com...
Business Inquiries: okpaintworx@gmail.com
Follow us on Instagram and get the scoop on upcoming projects!
/ garagenoise247
Follow us on Tik tok
vm.tiktok.com/...
video equipment I use
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
Rode wireless go
amzn.to/3xpJDAW
Dji osmo action
amzn.to/3cCjdUD
Disclaimer:
Due to factors beyond the control of Garage Noise, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Garage Noise assumes no liability for any property or personal damage that may arise from doing a repair on your vehicle after watching any of my repair video's. Due to factors beyond the control of Garage Noise, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Again Any injury, damage or loss that may result from improper use of tools, equipment, or the information contained in this video is the sole responsibility of the user and not Garage Noise.
Here's my Amazon affiliate link for this gun amzn.to/3QKdKhQ
bummer it's unavailable
So have a question. Im going to be restoring my 2001 Ford F250. I want to paint the truck myself but dont have a garage. Is there any advice you can offer for painting my truck outside or what you recommend on how to go about doing this outside to get a good paint job
You really can’t beat these guns. I think I’m going to pick another one up. Just used my r100 spot gun to do my first smart repair. Following your videos helped me get results I am happy with.
Awesome! I've been meaning to pick up a r100, how do you like it?
@@GarageNoise i was very impressed by it. It came in a kit I picked up from Home Depot along with my r500. I didn’t know if I would ever use it, but I’m glad I had it. I was impressed by how well it atomized my clear coat and the finish I was able to get right off of the gun. And I wouldn’t consider myself a skilled painter
@@Kaclaytor good to know, appreciate the response.
I just received the gun. It’s spraying lines in my metallic at 25 psi and full fan
First coat?
Check out this video ruclips.net/video/Re69D6U0P_E/видео.html
Is that good or bad?: "It’s spraying lines in my metallic at 25 psi and full fan"
up pressure or thin material and use slower reducer or activator @@RobPolson
@@RobPolson BAD, very bad. PSI too high and probably dial the fan in a bit.
I just ordered this gun because of you can’t wait to use it and compare
👍
Nice review! I love this style! I have the Aeropro A610 and been in love with it for about a year now. Waiting on another gun that looks about the same. It basically is the same. Inokin D1 Drizzle. They seem to have taken the same gun and gave it what I was looking for in all the others… dial knob readings! The packaging looks nice too. Comes with extra pieces as well
That A610 is terrible the R500 is better and the A610 is suppose to be an upgrade. I used them both at work and the A610 did not do well at all. It did not atomize well if shot like it had a 1.5 tip even though i had 1.3 tip on it the spray pattern what terrible. Now maybe i had a bad gun. You never know what you are going to get from buying cheap guns. But i buy them anyway to see it they shoot well. Most shoot ok but not as good as the big boys at the 200$ and up range i have Iwata, Sata, Devilbis, and they never let me down. Also thinking of getting a Sagola.
I got not to long ago from your recommended lvlp haven't used it yet but I happy that it came with a 1.3 tip for spraying motorcycles.
Awesome video, in case you have it posted and i missed it, what air pressure do you use for clean and base with the settings you have in this video?
Also i am spraying a metallic green if that matters
I think I put my setting in most video's but the base is typically around 20 and for clear it's about 28 this is a good guide to start with.
Identical to the aero pro A610 ! Much like different variants of the R500 , now it seems there will be other A610 copies with other vender names and subtle changes like color finish and im sure they will have others at some point with different color caps and knobs , All these LVLP R500/A610 and variants are a pretty good bag for your buck and works well with 20+ gallon compressors , Also produce"s less over spray...
I've already seen some other color produced. I like this color myself because it cleans up better than the a610. Appreciate your comment and support brother!
Yessir! I have been using the Aeropro a610 for about a year now and I love it!
The body looks exactly like drizzle d1 not sure about the internal parts .
I see you did three half turns out in this video on fluid knob. Im guessing thats for reference and you actually do three full turns when painting?
I bought one it was great thanks brother
👊
Hi Chris, Do you have a source for the digital air pressure regulator that you have on several of your paint guns? Harbor Freight no longer sells them. They use to be around $15. The problem I have is almost all regulators have a 0 to150psi sweep. Very hard to dial in below 20psi for these LVLP guns. Not really know the PSI?
Good video thanks for all the great tips
Thanks for taking the time to share this with us Chris, can you tell me if the YT-160 sprays any better than the R500 as I think these are both pretty much the same gun but was wondering if the internals have been improved making it lay the paint any better🤔thanks🙏👍John UK
Your right same gun internally. Spray the same.
A tip that might want to try' when spraying the whole side of a vehicle' instead of stopping at the end of one panel and then moving on to the next' you can use a skateboard and make one single pass and then back and forth.
🤣I might fall on my a**
Lol
Can I spray epoxy primer with this gun? Also, can you tell us what compressor and desiccant, regulator etc. system you're using with this so we have an idea of a complete system?
Thank you for the videos and information on these guns, with that said I know I asked tbis question before but after watching this video and seeing you do it I have to ask again, you say 3 complete turns out from full closed but it looks like you are turning the knob 3 turns and not a complete 3 full 360 degree turns as in if I start with the number one at a set spot am I supposed to turn it a full revolution until that number one is back in that same spot 3 times, or am I just supposed to seat it and then turn the knob 3 times from there? I appreciate your help just still tryimg to get this thing dialed in, still getting a lot of orange peel and not sure if maybe it's because I am flooding the panel to much or something else.
Nevermind, I figured it out. I watched one of your other videos on this gun and you in fact stated that the knob is marked and you rotate all the way back around to the same mark as one turn.
Hi do you have a make and model for this gun it's currently unavailable
R500 lvlp budget paint gun
@@GarageNoise thank you
Is this gun is the same as D1 LVLP gun ??
I heard the compressure turn while you were spraying, arnt you supposed to wait until tank refill before starting again, or I does that just depend on the size of compressure and type of gun being used🤔
Amazing the gun is already sold out. Currently unavailable
Yeah, I just saw the video on December 3rd and still out of stock on Amazon
Hey is there a way you can give me the part number for the PPS adapter? Mine did not come with one. Amazon was out so found one on a different site. Thanks
Spectrum #57505 at harbor freight
I will stick to the lvlp with three tip kit...better value
👍
Awesome
Thanks, brother!
Don't you still have to use lacquer theater to clean out your gun? So how is that saving on materials
Yes, but way less . It save time as well.
What needle size would you suggest for single stage paint?
1.4
@@GarageNoise thanks
So is this gun the same gun as the r500 and a610?
Ser what size of your pps adapter???thanks
same as drizzle d1,,
Where can you buy this
Here's the link amzn.to/3QKdKhQ
They just now made it unavailable I don’t know why
Why is the psi so high like 25psi with single stage. Will 15psi not be good enough?
Thanks for the review , unfortunately it’s out is stock at Amazon 😮
Yeah, hopefully they restock soon.
Were you able to find other tips that fit this gun?
Amazon
Hey Chris!! I have this particular gun. I’ve tried spray with it with the same settings (15-20 psi , 3turns from closed fluid and full fan minus 1/4 turn closed panel distance 8-10 inches ) but…. I have a lot of orange peel. When I say a lot you can’t imagine. Is there anything else that I can do? I really love this gun but I’ll have to send it to the trash next time I have so much orange peel.
I believe your saying you get orange peel in your clear. If I'm mistaken let me know. For clear your air pressure is a bit low bump it up to 28-30 or if you want to keep your psi low then decrease your distance to 6inche and lessin your fluid volume a 1/4 turn. This should correct things. Don't give up on it , it's not the gun, play with you settings, speed and distance you'll get it.
Sorry didn’t mention it. I’ve sprayed single stage paint direct gloss. Shall I treat it like clear? I’ve used to spray with hvlp guns but now that I’m forced to have a small compressor lvlp is the only option
@@Yannisdee yes, treat it like clear coat
It may not be the gun but the products used I have used the cheapest of cheap guns like the 15 harbor freight gun and layed the clear down like glass I find with the cheaper guns it’s better to reduce ur clear like 10% I like my fluid turned in only 2 turns and my fan is usually half a turn or 1 full turn In to get a flawless fan pattern but that all depends on compressor and air hose size also, and a big thing nobody talks about is ur ventilation in ur garage or shop will make a difference also the less over spray the better u need just as much air coming in as is going out of the space ur painting in if it’s cloudy and u can’t see when u stop spraying and it take a min to clear out then that’s probably one of the biggest contributors to the orange peel
I see ur using single stage that makes a difference to u wanna use a slower reducer and activator then normal base coat clear . It is a self leveling paint that’s why I’ll use the slow reducer or use retarder to slow it down . It will lay flat u definitely have to put it on wet
😊
Looks like a dv1
Huw muc
Currently unavailable
Yeah, they should be back instock soon. The seller emailed me yesterday.
Your "full turns" look to actually be 1/2 full turns.🤔
Garbage..get lph400 1.4 at 16psi
That's a $400.00 gun, not comparable bud.
@@GarageNoise ok.(best gun to paint a car in your garage (under 100$)) i agree
I had an lph 400 and loved it. Now it's over $500. I'm a big Iwata fan.
Yep love my LPH400 but yea every time I turn around it goes up in price..........can understand why people are looking for alternatives for a good hobby gun
If you are going to take the time to post Chinese crap at least make sure it is still available at the link you provided.
It was befor I posted Champ!
Which one is best to you lvlp guns that you use ???
They all spray the same. They just come in different configurations as far as accessories so it depends on what you like. I perfer the looks of this updated version the yt160 because the color cleans up better.