How To: Cleaning a RIPP Superchargers Oil Catch Can

rippmods.com/c...
Here's why they're beneficial to your engine How a catch can works and why they are beneficial to your engine:
Your engine relieves pressure from the crankcase through a hose that connects the valve cover to the intake manifold. This pressure is commonly refereed to as "blow-by". The ventilation of blow-by gases allow oil and gunky condensation into the intake manifold. This actually leads to more serious issues like contaminated intake air. Contaminated air is when the crank case fumes actually mix with clean air and lowering your octane. This leads to pre-ignition or pinging. This will cause issues with tuning and overall engine power. Even worse these contaminants will start to build up inside the intake runners and valves. When left unchecked this buildup can hurt fuel economy, horsepower, and can even cause misfires.
Adding a catch-can will prevent oil and other contaminants from causing buildup inside your engine. Essentially the catch can will act as a collection system. Installed into the crank-case ventilation hose to "catch" the contaminants before they can reach the intake manifold. The RIPP catch-can is focused on filtration and baffling. The RIPP Catch Can System (RCCS) has an integrated baffle plate and a Sintered Bronze Filter which acts as a liquid/fume separator creating an extra layer of filtration. This cleans the fumes as they pass from that can into your intake. With the RIPP Catch Can System you are covering all your bases to make sure you're getting the best filtration and separation on the market all it a package that's easy to own and maintain. Installation is a snap, about 25min to install.
RIPP Catch Cam System Features:
Sintered Brass Filtered breather to catch the smallest contaminants
Larger 300.00 ML Capacity
Machined Dipstick for no-hassle oil level checking
Aluminum hose fittings, (not plastic)
Billet Bracket for a perfect fit
No Drilling Required
Powder Coated parts for longevity
Easy Bolt On Installation
Pre-prepped Lines with anti chafing nylon sheathing.
All Hardware Included
Fully Serviceable for years of use

[@reinvent687]

Sad , no supercharger kit for 2022 Durango V6 not even R&D 😱🤦

[@jordanshenk7399]

Is there annnnnny updates on a kit for my 2018 Jeep GC 3.6?

[@buckmanbuck3232]

Ofcourse Ripp can and Coils on my 300s Thankx Boys Supercharger Next

[@Campbell1.]

Why doesnt the catch can have a drain-hose.simle dont have to empty it

[@RIPPMODS]

Thank you for the comment. The catch can is a screw off can, you drain it manually by unscrewing the can from the bottom of the intake and output tubes. Then you clean that can and dump out all of the piled up grime in the can. After that, the can is empty and cleaned. Please email [e-mail] if you have any more questions.

[@Campbell1.]

@@RIPPMODS Ok, thanks for the heads up ;)

[@ادممحمد-ب6ل]

P0500

[@فارسالفارس-ض7ث]

السلام عليكم ...عندك عطل بحساس سرعة السيارة

[@miguelquintana9785]

Como sacar la bomba de gasolina

[@maheshgoswami6596]

Purchase

[@donaldwhiteman3224]

im have to order this!!

[@joseorozco490]

Are you guys making a cold air intake for the 3.6?