VW MK6 GTI How to Remove Stock Front Sway Bar/Anti-Roll Bar Upgrade - Part 1
HTML-код
- Опубликовано: 26 авг 2024
- Step by Step on How to Remove the Stock Front Sway Bar/Anti-Roll Bar on a Volkswagen MK6 GTI. I will be installing the 26mm Eibach adjustable sway bars. This upgrade is applicable on the Volkswagen GTI's from these years 2004-2014. MK5/MK6 MKV/MKVI
//SUPPORT THE CHANNEL
Get CWB Merch and Custom Parts Here: craftyworkshop...
Support on Patreon: / craftyworkshopbuilds
//RELATED VIDEOS
Front Sway Bar Upgrade Part 2 - • VW MK6 GTI How to Upgr...
Rear Sway Bar Upgrade - • VW Golf MK6 GTI Rear S...
Front Big Brake Upgrade - • MK6 GTI Brembo 18z Cal...
//TOOLS & PARTS USED
Electric Ratchet - amzn.to/3kK3T9Y
Milwaukee Drill - amzn.to/32jZ6Zo
Milwaukee Impact Driver -amzn.to/35dE6on
Slim Flashlight - amzn.to/3nBvnDe
¾ Inch Drill Bit - amzn.to/3FNuQ6L
5mm Hex Bit Socket - amzn.to/2HyPa3B
19 mm Wrench -amzn.to/3IkGjfQ
13mm 6-Point Socket - amzn.to/3hjBaIT
16mm 6-Point Socket - amzn.to/3bachNS
18mm 6-Point Socket - amzn.to/3IuHM3r
21mm 6-Point Socket - amzn.to/3F1Y7vf
//CAMERA GEAR
○Primary Camera: Sony a6400 - amzn.to/2FYnAwb
○Lens: Sony E 18-55mm f/3.5-5.6 - amzn.to/3cpeN1Y
○Secondary Camera: GoPro HERO8 Black - amzn.to/301z2xV
○Primary Mic: Rode NT-USB-Mini - amzn.to/3x8ydkO
○Secondary Mic: BOYA by-MM1 - amzn.to/3kGS44w
○Light: VILTROX L116T - amzn.to/2RSqkh5
○Tripod: MACTREM - amzn.to/445zlWS
//STAY CONNECTED:
Instagram - / crafty.workshop.builds
Twitter - / craftyworkshopb
Facebook - / craftyworkshopbuilds
DISCLAIMER: Some links included in this description might be affiliate links. If you purchase a product I may receive a tiny commission. There is no additional charge to you! It costs you nothing but helps me big time in keeping these videos coming. Thank you for supporting my channel so I can continue to provide content.
Very well shot and scripted video. Nice work! Now, it’s on to part 2…
much respect 💪🏽
the only video that showed how to change sway bar, never would have tried if you didn't post this clip. You have saved me a lot of money. thanks!, I will try to repost when the job is done, im a slow one xD
Great and helpfull video. Most of the time I heard the bushing were not replaceable and you need to change the whole bar. But you proved the opposite🙏
Thank you.
I'm happy I was able to demonstrate the possibilities, thanks for watching!
Brother I still need an advice before I start work mine.
Is it really necessary to loosen the sub frame if you only need to replace the bushings instead of the whole sway bar? I mean isn't there enough space to drill away the bushing holes once the 4 bolt are loosen?
I was looking to swap out swaybar bushings on my 2015 Jetta SE. Just discovered the sway bushings are not available separately. Option is to go aftermarket bushings but have to remove the old ones either way. This video will be my guide when I get the parts. Thanks for these great videos on your channel they are very helpful
I'm happy you are getting value from my content, much respect!
Thanks man, this video was so helpful. I got halfway through the removal of my sway bar before I realized I needed to go MUCH further than just disconnecting the frame mounts. Thanks for the great video.
Thanks for watching! I'm happy this video helped you to finish your install.
Great video, do u need to do wheel alignment?
Yes, you'll need to do it.
Very useful vídeo. I'm fighting with the sway bar replacement on my mk5 tdi 🥴
Respect! Yea, it can be challenging
I just did the bushings replacement on mines , I just dropped the subframe and called it a day .
you did a bushing replacement on the stock sway bar?
@@CraftyWorkshopBuilds thats correct was able to find the bushings online , drilled out the brackets and replace the bushings , I did videotape the process, not all of it but will see how I edit it to explain to viewers lol sometimes in the heat of it you forget to pull out the camera
@@72onez81 Yea, I removed the bolts and dropped the subframe as low as possible, and there was still not enough room, and I didn't want to disconnect the steering rack and such, lol. Yea, working a recording at the same time, can make the process stressful.
@@CraftyWorkshopBuilds lol yea I know 🤣 I did a full complete front suspension upgrade , and alignment might do a drivehaft rebuild vid if I dont forget to pull out the go pro hahah 😜
Did you change them with polyurethane bushings or OEM rubber type? Also when you drilled the bracket did you reuse the brackets or buy new ones?
You made it look easy
Thanks!
Great video
Respect!
Would this be similar for a 2014 Jetta 1.8T?
Did you undo the bolt behind the pedals on the driver's side? That is the instruction from another video from the RUclips, to be able to lower the subframe.
I showed every step that I did in this video.
@@CraftyWorkshopBuilds Thanks!
Is it safe to jack it up from that spot on the pinch weld? It's not reinforced I was always told you have to jack it up from the pinch weld and put the seams under the control arm mount or risk the pinch weld rolling and the stand going through the floor
I've been jacking up my cars like this for years, without issues. Definitely jack up your car which ever way you think is best for you, and be safe.
Thanks for your explanations. I just have a question about the stock bar. After drilling the support, the nut is "free" how do you screw from below the subframe and prevent the nut from turning with the screw?
You could use a wrench or socket to hold it. It should slip into a little slot and stop turning once you start to tighten it.
@@CraftyWorkshopBuilds yes you are right, after looking closely the original bracket has a nut shaped hole on one side. This will block the nut after a few turns of screw. Thanks again
Chair bud, you dunno. My uncle from up near Churburg therrre know, chaaaair knock off
what size drill bit?
All the important tools that I used are listed in the description.
thank you
Respect!