Awesome work. So many projects was inspired from your channel that i will run out of time this year. Great thanks to you that you share your work with us.
@@SekAustria no problem. I searched some more and found several types of V-groove and U-groove bearings on AliExpress. I choose U-groove and will use those in combination with 10 mm round rod welded on square tubing.
Excellent work you have helped with your design to be able make a mini forklift for the same purpose,mine needs to be as low as possible.You have great skill.
Hi Sek Can you visit India to showcase this machine ( which carries heavy material up to 12 to 15 feet height ) ? :) I want to use it for construction work.
Now all it needs are some 12" wheelbarrow tires to cope with the rough ground around here and it's perfect ;) Seriously though, nice work as always. Even your projects that aren't 100% suitable for someone's needs, they still provide inspiration and helpful concepts that translate to similar projects. Keep up the good work
Make lift for first floor for senior cityzen . Nice very nice can used ready haavey motor n cross wiring than motor run upside n downside.structur is nice
@Sek Austria, Thank you for all the great videos you share with everyone. Your channel has great content, an always awesome videos. Keep up the good work.
Hi, Your system can not work safely by reversing the rotation to down way if you do not have any mechanical break system independent of the motor it self.
paps may tuitorial kaba pano mag weld ng maninipis na bakal pansin ko kasi may kanipisan ginagamit mong bakal pero ni minsan diko napansin na nabutasan mo pagnag weweld ka..may welding machine ako 250amp pero ang pinaka mababa eh gang 90amp lang pag nag weld ako kahit nasa 90amp na butas parin bakal newbee pa sa pag wewelding. sana may vid pa sa welding.. salamat!
Kahit 100amp pa sir pwede. Basta yung pagkaputol ng bakal is walang gap. Mabubutas talaga yan sir kapag may siwang, if possible dapat lapat na lapat siya. And nabubutusan din ako paminsan minsan dahil yun sa nasobrahang babad ng pagkaweld ko. Practise lang sir ganyan din ako date.
Everything in this video is awesome:the project,the face reveal and of course the beautiful cat and dog.
Hahaha 😅😅😅
gaya ng dati nice build ulit bro 👍👍
Salamat bro
Nice! I really like it:)
Thanks bro
It saves senior citizen's back! Brilliantly made! ♥♥♥
the times were in now is when you should be wearing a mask, and now you take it off lol, Great work man, love the channel
Could use the frame design and a manual come along for those 'just not the expense of the whole thing' kind of projects. Its a great build. Kudos.
Молодец! шикарно получилось!!!
Nice build bro. Me gagayahin na naman ako. Nice idea. Ang galing!
I liked your press which you made using hydraulic jack! Please show me how you made it !
Check my channel bro
Great project - it will spare you for a lot of back pain!
Thanks bro
Perfeito , só falta uma carenagem para as rodas dentadas kkkk. Parabéns !
Perfect, just missing a fairing for the kkkk sprockets. Congratulations !
You are a good man
Thank you so much
realy i like your jop
Beautiful job, dude! Really well done! 😃
Thanks bro
Bro si let's learn something ba pinoy din?
Awesome work. So many projects was inspired from your channel that i will run out of time this year. Great thanks to you that you share your work with us.
Wow thanks, Goodluck to you bro 😁😁😁
te quedo genial amigo creo que ya tome nota para hacer uno graciassss eres muy creativo felicidades
ang galing na naman idol sek. nakakaingget hahaha.... sana all 😀😀😀
😅
Very good . I will follow this model.
Thank you very much !
Awesome sek. As always.
Классный Станочек, для гнутия листа под 90 градусов.
You could add a snatch block to increase the load limit on the winch cable. Awesome build!
I think he's aware of that bud
@@DOWNMFDOWNMF now we know he is.
Nice job; we featured this video on our homemade tools forum last week :)
Super finish
Best wishes.
Tuyệt vời , rất hay và hữu ích . Cái tời kéo rất khỏe .
👍👌✌😍🎖😎🙏👏Good work
Great work you have made.I would like to thank you very much and to see more creative work.
دائماً أنت مميز ومبدع ومبتكر
Ну Фсё офигенно,особенно белый свитер рыбок!
Great project, bro! Thanks for sharing!
Nice 💖👍❤️🎈
Thanks bro
Super pogi at super galing! 😘
😂🤣😂🤣
Не плохо! Но надо было сделать на задней нижней полке противовес и переднюю нижнюю полку убрать, что бы можно было подъезжать ближе.
Muy buen proyecto, te felicito,..también se puede hacer con un malacate manual, saludos desde R: Argentina
Nice job!
Can you please also provide a link to the shop where you got the V-groove bearings? I looked on banggood but cannot find this size.
I dont have links for them bro. I just bought in a local hardware store
@@SekAustria no problem. I searched some more and found several types of V-groove and U-groove bearings on AliExpress. I choose U-groove and will use those in combination with 10 mm round rod welded on square tubing.
Excellent work you have helped with your design to be able make a mini forklift for the same purpose,mine needs to be as low as possible.You have great skill.
Hi Nice machine
Can you make it to lift heavy objects upto 12 feet ?
Very fine ... congratulations >>>
Bon travail!
Belle conception.
Hi Sek
Can you visit India to showcase this machine ( which carries heavy material up to 12 to 15 feet height ) ? :)
I want to use it for construction work.
That might be impossible for me to go there bro. Sorry
Супер Класс Удачи тебе
Interesting rig !
Thanks bro
Now all it needs are some 12" wheelbarrow tires to cope with the rough ground around here and it's perfect ;) Seriously though, nice work as always. Even your projects that aren't 100% suitable for someone's needs, they still provide inspiration and helpful concepts that translate to similar projects. Keep up the good work
Thanks brother
Make lift for first floor for senior cityzen . Nice very nice can used ready haavey motor n cross wiring than motor run upside n downside.structur is nice
Супер! Мне бы такую лебедку. ))
Thanks bro
ang galing!!!!! magkano kaya magpagawa sau ng automatic lifter na sing taas ng kalahati ng height ng 1x40 container van?
Creative💪💪
Thanks bro
Genius idea!
Thanks bro
@@SekAustria I wish if you could give your email id , we can talk!
for 200-300 barrels need work can u show how to build the thing plz upload video need ur help
for 200kgs barrel wht i mean
i didn't watch the full video yet but i know it's awesome!!!!! comment first! lol
good job
Good for union workers who work for the city!
Красавчик- здорово!!!
¿podrías crear algo así, pero más pequeño y portátil como para subir y bajar garrafones de agua?, saludos.
Nagpa kita ka narin sa mukha mo idol!.👍😊
😅😅😅
!!! GENIAL !!! NO HAY MAS QUE DECIR ...
What is the power of the winch motor you used?
Very creative!
Which motor used it
2:38 uy que susto! 👨🏭
4:37 uy que susto! 🐶
😜
Awesome!
Thanks bro
@Sek Austria, Thank you for all the great videos you share with everyone. Your channel has great content, an always awesome videos. Keep up the good work.
Чудовий задум, друже!
Well done, bro.
Thanks bro
Awesome!!..
Thanks bro
Parang forklift ahhahahahahah ganda idol
Hahaha
Boss ayus yang project mo..👍
Galing..
Ask q lang boss kung pano bend nung square pipe?..
Salamat
Check mo ibang videos ko may ginawa akong square bender
Pare ka lupit mu ka pwersa na yan..
Wa pare. Mayna yamu views hahah
very smart 👍🏽👍🏽
Ang galing mo talaga idol
Thanks bro
Bạn có thể cho mình xin thông tin bánh răng. Số bánh răng để tạo thành cái tời đó dc k
Hi,
Your system can not work safely by reversing the rotation to down way if you do not have any mechanical break system independent of the motor it self.
outro bom video!
nice work but for the next time could u put yr dog away from u when u welding (to protect his eyes)
how about wiring i see u put limit switch up
pls show wiring diagram
I wish: I were you! ♥♥♥
😂
Muito bom gostei bacana demais amigo valeu
How much is the total cost of.materials and where to find the winch of that model.
Nice
Need this for my shop .....
sir from phillippines .
🔥🔥🔥
Awesome.
Are you from the philippines? Need you
paps may tuitorial kaba pano mag weld ng maninipis na bakal pansin ko kasi may kanipisan ginagamit mong bakal pero ni minsan diko napansin na nabutasan mo pagnag weweld ka..may welding machine ako 250amp pero ang pinaka mababa eh gang 90amp lang pag nag weld ako kahit nasa 90amp na butas parin bakal newbee pa sa pag wewelding. sana may vid pa sa welding.. salamat!
Kahit 100amp pa sir pwede. Basta yung pagkaputol ng bakal is walang gap. Mabubutas talaga yan sir kapag may siwang, if possible dapat lapat na lapat siya.
And nabubutusan din ako paminsan minsan dahil yun sa nasobrahang babad ng pagkaweld ko. Practise lang sir ganyan din ako date.
@@SekAustria salamat paps may ma recommend kabang rod na madalas mong gamit?
Galing mu naman kaluguran...
Haha salamat soy
Very good
It so strong...
יפה כל הכבוד
How rupees lift motor
Awesome
Thanks bro
BRAVO!!!
Where is the link for the V Groove bearing wheel?
I dont have links for them bro sorry
@@SekAustria where did you get them?
Грузоподьемность - "один человек без напряга перетащить". Хотя, для больных и инвалидов может и полезно.
sir ask lang kung anong motor o mechanism ang ginamit nyo dyan?
Car winch po yan sir
Increíble 👏👏👏👏
kaya ba makagawa ng costumised para outboard engine? them om me magkano. thanks
lodi great work
Galing idol..parang forklift..bilib talaga ako sa taba ng utak mo..sana all..hehe..gudluck po
Clever!
Good bhaiya
👏👏👏🙋🙋🙋❤❤❤
😅😅😅
Saan u na ka buy NG pully kabayan tnx
Sa mga hardware meron nyan. Sa imart mall ako nakabili
Add safety screen na lang bro.