Sir what can you tell me about such a 3 in 1 transmitter? If the control range is more than 60 kilo meters, which supports Pixhawk, I can connect my smartphone to that transmitter and see all the data or camera live on my screen.😶
hi, nice video..how do you transmit the telemetry data to a ground station running Mission Planner?..is there external module or the internal PARA module can connect to Mission Planner?
Can u build something out of thermocol(thermocol is a material used in India for fragil stuff so it doesn’t break , i live in India )a plane specifically with 3 control surfaces or 4ch aircraft also thermocol is very easy to break so be carful and make it fly pls I want a totorial to build one
i kinda need help for choosing my cessna 172 rc motor plz the wing span is 100 cm the body is 55 cm the wait with battery is 440g can any one help for choosing the best motor for that
have you figured out how to adjust the travel of the gimbals? I just got the radio and have taken it apart many times but I cannot figure out where the travel adjustment is.
You don't have to take it apart, just reveal the holes from the back and use a screwdriver. The holes are covered by the rubber, I showed in the video.
@@Joyplanes I'm looking for the travel adjustments that change it from 60 degrees to 45 degrees. the ones you show in the video are just for changing the tension of the gimbal springs
...looks like a ripoff of my jeti ds 16 except that the jeti protocol works backwards with everything jeti ever made...my frsky radios and receivers does almost not work even with themselves after frsky left all pre-access protocol buyer and owner in the cold...never ever buy any frsky product ever again...frsky started as an chinese cloning company and is now since access protocol upgrade locking and cryptating what they been stealing before...better to buy and use radios from radiomaster, jumper and so on for backwards compatibility frsky receivers...never ever buy an rc radio from frsky ever never never never again...
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
I can't find what the power output in 900mhz is...
Can't find it anywhere and nobody talks about it.
This is something like a beasttt
Just got mine being a Spectrum fanatic. Going through it. Two satellite rx and a TD R10.
will this work with any 900/915MHZ with a sbus out like the- FrSky R9 SX ACCESS OTA 6/16CH PWM/SBUS Long Range
Sir what can you tell me about such a 3 in 1 transmitter?
If the control range is more than 60 kilo meters, which supports Pixhawk, I can connect my smartphone to that transmitter and see all the data or camera live on my screen.😶
hi, nice video..how do you transmit the telemetry data to a ground station running Mission Planner?..is there external module or the internal PARA module can connect to Mission Planner?
do we need to buy antina extra ? or its come plug and play
Can you show how do you program the baterfly for gliders?
Will this worth with my quad that has 4 in 1 30a esc?
This radio support TBS Crossfire?
Is this better than futaba
The gyros are an interesting thing. Now you can put the radio on your head as you fly and its a headtracker!
Can u build something out of thermocol(thermocol is a material used in India for fragil stuff so it doesn’t break , i live in India )a plane specifically with 3 control surfaces or 4ch aircraft also thermocol is very easy to break so be carful and make it fly pls I want a totorial to build one
yay new video
Tandem x20s either radiomaster tx16s max, which one will you recommend ?
Theres a huge difference in quality between the two, they arent really comparable in my opinion because they are in different classes due to the price
I would recommend the tandem x20 / x20s if you need a solid link and want a quality radio
Will it work with my Spectrum RX
No, unless you use a spectrum RF mini module for this radio.
i kinda need help for choosing my cessna 172 rc motor plz the wing span is 100 cm the body is 55 cm the wait with battery is 440g can any one help for choosing the best motor for that
A drone motor should be fine, a 2205 2000kv, even a smaller one.
Yeah 2204 or smaller
Smaller is better
@@Joyplanes ty
@@rahultej2248 thx
Can i use this radio to fly 3D helicopters and drones?
have you figured out how to adjust the travel of the gimbals? I just got the radio and have taken it apart many times but I cannot figure out where the travel adjustment is.
You don't have to take it apart, just reveal the holes from the back and use a screwdriver. The holes are covered by the rubber, I showed in the video.
@@Joyplanes I'm looking for the travel adjustments that change it from 60 degrees to 45 degrees. the ones you show in the video are just for changing the tension of the gimbal springs
@@ErikJohnsonFMA Ok, I haven't changed that, so if those are not the ones then we need to figure it out.
Nice video
jeez i dont even need this stuff lol
First
I heard ethos sucks and is buggy, firmware updates all the time. For just a little more I got a tried and true Jeti transmitter. Now thats a radio.
...looks like a ripoff of my jeti ds 16 except that the jeti protocol works backwards with everything jeti ever made...my frsky radios and receivers does almost not work even with themselves after frsky left all pre-access protocol buyer and owner in the cold...never ever buy any frsky product ever again...frsky started as an chinese cloning company and is now since access protocol upgrade locking and cryptating what they been stealing before...better to buy and use radios from radiomaster, jumper and so on for backwards compatibility frsky receivers...never ever buy an rc radio from frsky ever never never never again...
Yup, I was like WTH Jeti look-alike..
failsafe
The Jimbles hahaha. It's gimbles with a hard G. Not J. Ha. What's up Jilbles. I'm gonna call you jilmbles for now on.
Not a big deal !