Yup because peeps that need a lot of these features might be better off with the trx50 board and threadripper (or even epyc) platform If there was a bundle deal for the upcoming 9950x3d and this board for like $2300-$2500 AUD or like $1500-$1600USD then maybe but still 😮$
Before you buy this motherboard or any other x870e mobo, make sure and READ the manual and check the options you will get. The info about M.2 slots that says on the video is not right at 8:38 -2x PCIe 5.0 x4 M.2 (disabling both USB4 ports) -2x PCIe 4.0 x4 M.2 -1x PCIe 4.0 x2 M.2 Or -1x PCIe 5.0 x4 M.2 -1x PCIe 5.0 x2 M.2 (with both USB4 ports available) -2x PCIe 4.0 x4 M.2 -1x PCIe 4.0 x2 M.2 Also, note that if you use the Xpander-Z M.2 Gen 5 or wherever the name is, it will share a bandwidth with the PCIe 5.0 x16 slot where the GPUs go and will get to x8 x8, meaning that the first PCIe 5.0 will run x8 as the second PCIe 5.0 will run at x8 too, because it’s CPU limits and cannot provide more than 24 PCIe usable lanes. Note too the GPU will not limited if you don’t use the second PCIe slot in the motherboard, either way the design of the Xpander-Z M.2 it’s a great feature and I think can be use in a future for a long time. Knowing this info I already had purchased this Motherboard because the others x870e mobos doesn’t meet my expectations (as ASUS), I can afford it and if you can go get it.
@@Joshua-pr9vgI know I won't, but in the future there's always the possibility. Even a 5090 likely won't suffer from 8 pcie 5 lanes so for some use cases you might prefer to use those lanes for pcie5 SSDs to keep your 40G USB. I am going to use 2 8TB WD Black Gen 4 sticks, so I won't be using the gen 5 slots in my initial build. The real world performance just isn't there yet for me. In the future that might change and it is nice to have options.
Bloody hell Nick…I swear, the only way this motherboard is worth it, especially to us Aussies, is if you get sampled one like you have lmao. There’s no way I could imagine dropping like $2200-$2400AUD just on a mobo…that’s wild lol
at least you can drop a decent cpu in this one, but check out new asus maximus extreme for new intel chips at 1400$….now thats wild. what a world we live in…
Give it a year or so and it'll probably be half price or less, the Z790 godlike can be had for $479 at both Newegg and Amazon in the US right now, same thing happened with the EVGA Kingpin motherboards too
OK, but how many of the extra NVME slots will kill your graphics card speed? For over a thousand dollars, I should be able to fill every one of those god damned slots AND add the hot swap card and still have my graphics card run at x16 speed.
@@TungstenS7 So youre saying I CAN fill every one of those slots and my G card will still run at x16? If so, I might actually consider this board.....though I wish I could get it WITHOUT the plate covering all the actual circuitry. Not a fan of this apple style "cover everything up with a solid blank plate" aesthetic that all these manufacturers are doing now. I understand the heat dissipation side of it, but I also like seeing all the bits and bobs that make up the circuitry....
not 100% certain but from what i understood pcie 1 and 2 are linked so 16x/0x OR 8x/8x but separate from m.2 while pcie3 will run at 4x OR x2 if m.2#4 is used. so get a taichi or aorus xtreme if you got too much money XD
@@BloodySilverAMV At the same cost you can get a board that supports 256Gb per stick not total. You could also have 7X SSD's all on their own X8 PCI-E channel instead of sharing one PCI-E 4X lane on the chipset. That is a VERY big difference.
I have the Asus 870e hero version, do you think the msi motherboard 870e godlike is a better purchase? in terms of features if we had unlimited money let's say.
@@BuddyBoy1st If you have the money to buy this board, you have the money to build a threadripper system. Which is WAY better value for the money spent. There is little to no difference between 870E boards other than useless features. If you want to build an 870E system, just buy the cheapest one that works with your operating system of choice.
I wish manufacturers would incorporate debug led or 7 segment 2 digit led display mandatory into every board. not just high end but on low and mid range. that would be great.
Yup same with the proart x870 board too, and I wrote to Asus asking them and they said it did have debug LED's but didn't say where... If n when the screen on the godlike fails, that's it...and with a limited run I wonder how much stock for pieces like that will be available a year or two from now hmm
That thing costs $1,100 in the US. My pc that I built almost 4 years ago was $2,000. I can't justify spending more than $300 on a motherboard, let alone $1,100. For the vast majority of gaming-focused builds, a board this expensive is a complete waste. I'm aware that $1,000+ graphics cards exist. At least with gpus, you get tangible gains in performance the more you spend. This concept doesn't really apply to motherboards. Other than better overclocking support, a newer chipset, and features like pcie 5.0, is there anything that an $1,100 board can do that a $250-$300 board can't?
You're not wrong, but my 40th birthday is right around the corner, and I bought one of these for my midlife crisis top of the line PC build. No expense spared, building myself the very best of the best for once in my life. Waiting for the 9950X3d and RTX 5090. It's ridiculous, but I'm at peace with it.
This is insanity, the person who can afford this isn’t going to appreciate any of these features. That 60w usb-c header at the bottom is lowkey clutch, it can power an entire laptop or high resolution display.
@ Seriously, lol...to be fair, the others aren't any better..RGB software from motherboard manufacturers is just horrendous. Thank goodness for SignalRGB and OpenRGB.
I recently turned my old MSI X99a godlike board into a Homelab server with a 22 core Xeon. I didn't think I would still get value out of it 10 years later just for the socket and pcie lanes. Hard to see the value in this new one, even if AMD keeps the socket around for the next 10 years but, damn does it look good.
Nick mate ... This is like peering through the window of the Lamborghini dealership, Awesome to look at But no chance of owning 😜 Edit .... Can you get those M.2 cards separately ?
I'm rocking the ASRock B650E Steel Legend WiFi. By no means a top tier board, but ASRock mobos just seem to have everything you need as well as looking good, without having to default on mortgage payments.
6:47 finally a 15 fps screen on my 1400$ motherboard i dont understand why so many technical devices including cars have those super cheap low Hz displays. it looks so cheap and like a knockoff
The point is to be evil for them (and some buyers). It seems the screen have issue, which is in concordance with what i wrote. You can find owners complaining about it in the comment section.
If you use the expander card for m.2 drives, will they run at full speed? Will it pull from the graphics card? Just trying to understand the use case for this. Thank you
I'm looking at in comparison to the MSI Prestige Creation and given when it cam out its just a natural step up to the DDR5 and new AMD Chips. What do you think?
@dimarcusa i'm in the same boat as you. I updated my bios about a week ago, and it went from displaying vitals and q r codes to literally just a loading screen not even displaying the temperature of either the c p u or the mos. They came out with a patch. It did nothing and yesterday again they came out with another patch, and all it did was bring back my c p u and mos temps. Yeah I can't say i'm happy either.
Definitely a niche product for the 1% of 1%, but it’s just insane how high end hardware is priced so high. I fell into that trap of chasing the top of line hardware a few years ago and spent way too much just to have buyer remorse when new hardware is release a year later. Luckily, midrange is more than enough for majority of PC DIY
If you install an AIO or have a CPU fan, wouldn’t that cable be short? And if it wasn’t, wouldn’t it run over the top left screen and block some of the screen?
the idea of a controller box and less headers on the motherboard is interesting, however that means if the box fails, everything fails and your completely stuck.
@@GearSeekers oh i thought ill just buy another god motherboard to replace it -_-. Lol..this thing is just...2100AUD, most likely 2500AUD, its like the price of a 4090 (early days)
It does look pretty sick, especially with 15 USB ports at the back! But I can already see potential issues with it. The complicated lanes halving with two of the five M.2 slots, one of them running at default at x2 instead of x4. The Expander card looks interesting, but already there will be issues with airflow/mounting with larger GPUs like the 4090, including vertical mounts. That side EZBridge also looks nice, but limits those of use who like to use Lian Li strimers (most of it will be hidden). X870E feels like a chipset that is not actually an upgrade but more one which has significant tradeoffs simply due to the structural limits.
I’m planning to grab this board been waiting since they announced the x870e lineup and still by till this date it’s not available in Canada, I might have to grab one for the states
That board really has some awesome features. I really like the 90 degree connectors and the lcd? display something unique but im not willing to pay more than half a months wage on a glorified mainboard. I just baught the MPG Carbon Wifi, that has most of the quality of life features as well and thats still around 460€ without a discount here in germany. Paying about thrice the amount is ridiculous. In addition to that i really like boards where you can still see the pcb
very nice looking board indeed Nick! all the motherboard manufacturers really need to give more love to their lower tier boards though as the prices keep creeping up but have lesser value.
I looked at the price of the X870E motherboards and my jaw just dropped. Not only the chipset and features are almost the same as the X670E. They are charging more for it. And no ACE model. So i went for the X670E ACE which is also overkill but it had the 10Gbe LAN port. 10Gbe networking is getting cheaper but motherboards are still lacking 10Gbe support. The highest is only 5Gbe. And only 2.5Gbe is getting mainstream.
Well for the SATA Cables it is a little redundant since most HDDs and SSDs come with their own SATA data cable but still if you want to cable manage for all your possiable future drives it will be nice.
Why is this tempting me so much? It's ludicrously expensive and not worth the cost of entry. Maybe when the AM5 Threadrippers come out and there are enough PCI lanes to use all the m.2 slots FULLY? Really love this board.
There’s not a Chip out right now that would even take advantage of these over the top features, not even when overclocking. Everything out right now runs pretty cool. I honestly like the ASUS Hero Board over this.
At this price you should just get a Threadripper system... then you won't have any lane sharing/bandwidth/expansion compromises and you can also go crazy on RAM. Sexy board with some nifty inclusions all the same.
reminds me of the ROG CROSSHAIR X570E...thing is a monster and what i use currently. idk why i decided to go old generation but i got the thing about 16 months ago and even with how old it is was still worth like $800. Has all the bells and whistles especially for AM4. This is actually the first MSI board that i could see myself wanting, but nah i still prefer Asus.
It actually is a problem. I have an adapter for four drives that I use all the time. It's disgusting they can charge that much for a board with only one by 16 PC IE slot
Back in 2020 I got a z490 Godlike from MSI for for $750. I'll never buy another mobo for that insane of a price ever again lol. Honestly, I regret it. Cause it really lets the CPU perform at it's best possible, but do I want to get a lower end mobo for current gen processors? Not really, but again I really don't want to spend that much on another mobo.
Another $1,000+ dollar motherboard that doesn’t include a physical manual. PDF’s are inconvenient to reference in the middle of a build, and I hate this trend.
I'm not sure how I feal about this one I think somethings could be better, what's the point of having ATX e motherboard if all your connectors rely one proprietary connector? that is so simply removable? MSI You might as well add a wire and move these ports to the backside of the case. It makes more sense this way! The arrangement and size vs practicality doesn't add up. also there's to many small flashy useless screens, why not add one really good one? with useful info like per core temps or 4k oled or something?. or even boot information! also the mate black paint job doesn't really make it look like anything special. I could buy some Doller store mate black spray paint in a can and turn up the same Finnish. Final thoughts do you need all these ports at the cost of impracticality? hopefully you not buying for looks alone! I was drawn to godlike boards in the past but for this one I may just go with the carbon this time around.
The past few months I have been watching sooo many videos including a lot of yours just to try n find the perfect case to fit this motherboard, a hopefully future-coming 5080 noctua x Asus card and the not-much-left-of-Q4-coming seasonic x noctua PSU 😅😊 very difficult! Also moar difficult because the vrm screeny bit on the left might block an NHD15 g2 in a similar way the 2nd fan on that cooler limits ram height to 33mm 😢 because even though a board of this type deserves an open loop, I am a noctua and aircooling fangirl so this might be a deal breaker, so taichi or one of the others maybe.... And yup, ik ik its a nice problem to have but for my first ever build and after a lot of personal stuff in my life, making a system with this mobo would be lovely 😊
If you want a case for this board get the MSI Meg Prospect 700R, I'm rocking one myself and it's a fantastic case with excellent airflow, my only negative with the case is that for the money the fans they use are cheap s@it, so just use it till they go, then replace the fans.
@@Excalabur50 that's a interesting looking case but would benefit more either closed or open loop and I feel I'd like to do aircooling :) but thank you for the recommend, this case was not on my radar so I'll look at it more in depth
@@the.scarlet_witch.official No problem and it can do either closed loop or air very well, I'm using an MSI S360 AIO and my 5950X just doesn't get that hot even during our 45C summers it's 27C now at 40% humidity and my CPU is 40C whilst watching RUclips.
That price is insanity.
Yup because peeps that need a lot of these features might be better off with the trx50 board and threadripper (or even epyc) platform
If there was a bundle deal for the upcoming 9950x3d and this board for like $2300-$2500 AUD or like $1500-$1600USD then maybe but still 😮$
Not worth it.
6:47 finally a 15 fps screen aswell
Not really
Wrong, that price is GODLIKE.
Before you buy this motherboard or any other x870e mobo, make sure and READ the manual and check the options you will get. The info about M.2 slots that says on the video is not right at 8:38
-2x PCIe 5.0 x4 M.2 (disabling both USB4 ports)
-2x PCIe 4.0 x4 M.2
-1x PCIe 4.0 x2 M.2
Or
-1x PCIe 5.0 x4 M.2
-1x PCIe 5.0 x2 M.2 (with both USB4 ports available)
-2x PCIe 4.0 x4 M.2
-1x PCIe 4.0 x2 M.2
Also, note that if you use the Xpander-Z M.2 Gen 5 or wherever the name is, it will share a bandwidth with the PCIe 5.0 x16 slot where the GPUs go and will get to x8 x8, meaning that the first PCIe 5.0 will run x8 as the second PCIe 5.0 will run at x8 too, because it’s CPU limits and cannot provide more than 24 PCIe usable lanes.
Note too the GPU will not limited if you don’t use the second PCIe slot in the motherboard, either way the design of the Xpander-Z M.2 it’s a great feature and I think can be use in a future for a long time.
Knowing this info I already had purchased this Motherboard because the others x870e mobos doesn’t meet my expectations (as ASUS), I can afford it and if you can go get it.
They're sold out... mine arrives Friday. Too bad my CPU arrives sometime next year...
great information, thanks for sharing.
I assume you won't be utilizing the Xpander.
@@Joshua-pr9vgI know I won't, but in the future there's always the possibility. Even a 5090 likely won't suffer from 8 pcie 5 lanes so for some use cases you might prefer to use those lanes for pcie5 SSDs to keep your 40G USB. I am going to use 2 8TB WD Black Gen 4 sticks, so I won't be using the gen 5 slots in my initial build. The real world performance just isn't there yet for me. In the future that might change and it is nice to have options.
@@CarlosElPeruacho mine arrived very damaged in the box from taiwan yesterday:(
Bloody hell Nick…I swear, the only way this motherboard is worth it, especially to us Aussies, is if you get sampled one like you have lmao. There’s no way I could imagine dropping like $2200-$2400AUD just on a mobo…that’s wild lol
at least you can drop a decent cpu in this one, but check out new asus maximus extreme for new intel chips at 1400$….now thats wild. what a world we live in…
@@medovk We truly are in the darkest of timelines...
@@Devastator0 sure would be mad if i bought that before cpu reviews went out
Give it a year or so and it'll probably be half price or less, the Z790 godlike can be had for $479 at both Newegg and Amazon in the US right now, same thing happened with the EVGA Kingpin motherboards too
@@Devastator0guys mobos like this have existed since 9th gen Intel hell maybe even 8th this is not new
The fact that you now plug your mouse and keyboard into USB 10G is amusing, when we once use to use PS/2 ports
OK, but how many of the extra NVME slots will kill your graphics card speed? For over a thousand dollars, I should be able to fill every one of those god damned slots AND add the hot swap card and still have my graphics card run at x16 speed.
This exactly
For that price, everything should run at x64 while rubbing your feet.
There's no lane sharing.
@@TungstenS7 So youre saying I CAN fill every one of those slots and my G card will still run at x16? If so, I might actually consider this board.....though I wish I could get it WITHOUT the plate covering all the actual circuitry. Not a fan of this apple style "cover everything up with a solid blank plate" aesthetic that all these manufacturers are doing now. I understand the heat dissipation side of it, but I also like seeing all the bits and bobs that make up the circuitry....
not 100% certain but from what i understood pcie 1 and 2 are linked so 16x/0x OR 8x/8x but separate from m.2 while pcie3 will run at 4x OR x2 if m.2#4 is used. so get a taichi or aorus xtreme if you got too much money XD
$1100 USD is insane for a board that only has 2 channel memory and limited PCI-E.
Godlike price!
7x SSD support 256GB RAM 🤷♂️ buying godlike is like buying rolex
@@BloodySilverAMV At the same cost you can get a board that supports 256Gb per stick not total. You could also have 7X SSD's all on their own X8 PCI-E channel instead of sharing one PCI-E 4X lane on the chipset. That is a VERY big difference.
I have the Asus 870e hero version, do you think the msi motherboard 870e godlike is a better purchase? in terms of features if we had unlimited money let's say.
@@BuddyBoy1st If you have the money to buy this board, you have the money to build a threadripper system. Which is WAY better value for the money spent. There is little to no difference between 870E boards other than useless features. If you want to build an 870E system, just buy the cheapest one that works with your operating system of choice.
I wish manufacturers would incorporate debug led or 7 segment 2 digit led display mandatory into every board.
not just high end but on low and mid range. that would be great.
Yup same with the proart x870 board too, and I wrote to Asus asking them and they said it did have debug LED's but didn't say where...
If n when the screen on the godlike fails, that's it...and with a limited run I wonder how much stock for pieces like that will be available a year or two from now hmm
Be aware that all X870 GIGABYTE MB had all a Ez-Debug Zone with 80 PORT code and a multi key zone.
That thing costs $1,100 in the US. My pc that I built almost 4 years ago was $2,000. I can't justify spending more than $300 on a motherboard, let alone $1,100. For the vast majority of gaming-focused builds, a board this expensive is a complete waste.
I'm aware that $1,000+ graphics cards exist. At least with gpus, you get tangible gains in performance the more you spend. This concept doesn't really apply to motherboards. Other than better overclocking support, a newer chipset, and features like pcie 5.0, is there anything that an $1,100 board can do that a $250-$300 board can't?
You're not wrong, but my 40th birthday is right around the corner, and I bought one of these for my midlife crisis top of the line PC build. No expense spared, building myself the very best of the best for once in my life. Waiting for the 9950X3d and RTX 5090. It's ridiculous, but I'm at peace with it.
@@CarlosElPeruachohappy birthday and congratulations on being confident enough to treat yourself to something epic! Enjoy the new system!
200 dollar boards have those things too lmao
@@CarlosElPeruacho that is super epic, you work hard enjoy it
@@CarlosElPeruacho You and me both. I am waiting for the CES convention like a hawk right now because of it all.
5:08, ooooof, that bent pin
that just screams quality
Definitely softening up to it more than I expected after watching this as well. Looking forward to more like this in the future.
Awesome! Eagerly waiting for it to be available here in Europe, hopefully 😍
This is insanity, the person who can afford this isn’t going to appreciate any of these features. That 60w usb-c header at the bottom is lowkey clutch, it can power an entire laptop or high resolution display.
MSI can include as many rgb controllers they want, they're RGB software is horrendous.
That´s why is called MSI - Multiple Serious Issues
@ Seriously, lol...to be fair, the others aren't any better..RGB software from motherboard manufacturers is just horrendous. Thank goodness for SignalRGB and OpenRGB.
their*
To be fair it CANT be worse then Armory crate 😅 that software needs to die lol
@@MuhammadAli-ny4jd icue says hi 🤣
Sorry I can't blow 2200$ on a motherboard, gotta save that money for the 5090 haha
Great final take... Nothing left to say. GG
I recently turned my old MSI X99a godlike board into a Homelab server with a 22 core Xeon. I didn't think I would still get value out of it 10 years later just for the socket and pcie lanes. Hard to see the value in this new one, even if AMD keeps the socket around for the next 10 years but, damn does it look good.
Nick mate ... This is like peering through the window of the Lamborghini dealership, Awesome to look at But no chance of owning 😜
Edit .... Can you get those M.2 cards separately ?
It's an amazing mobo with lots of goodies to end up only watching RUclips techies videos ❤
King of X870E but i will get a X870E Taichi
Good choice, ASRock is way better than MSI or ASUS!
I was look at the Taichi lite
I'm rocking the ASRock B650E Steel Legend WiFi. By no means a top tier board, but ASRock mobos just seem to have everything you need as well as looking good, without having to default on mortgage payments.
@thornstrikesback I agree...But i will build the Dream PC... soo i will spend more and Get the X870E Taichi! B650E steel Legend More than enough!
@@ramonzaions7522 For sure.... If you can spend the $$$, definitely got for the Taichi.
The chapters in the video seem to be copied from the ssupd xhuttle video, just thought id let you know since i noticed it
6:47 finally a 15 fps screen on my 1400$ motherboard
i dont understand why so many technical devices including cars have those super cheap low Hz displays.
it looks so cheap and like a knockoff
THANK you, it makes it look so cheap when you’ve spent $1100 on it
The point is to be evil for them (and some buyers). It seems the screen have issue, which is in concordance with what i wrote. You can find owners complaining about it in the comment section.
If you use the expander card for m.2 drives, will they run at full speed? Will it pull from the graphics card? Just trying to understand the use case for this. Thank you
great overview as always
Guys , there are some ATX boards there with E at the end dont confuse them with E-ATX !!
am I correct - removing the bottom VRM allows to instal x8 pcie device into bottom pcie x4 slot?
They should put more efforts in designing backplates 4:48 because that's the most visible part of the pcie cards in the majority of pc cases
The board price isn't even an issue when you consider how much everything you can plug into it would cost.
I'm looking at in comparison to the MSI Prestige Creation and given when it cam out its just a natural step up to the DDR5 and new AMD Chips. What do you think?
mine arrives today from newegg, cant wait
the next line of NZXT boards be lokking interesting to, lokking forward to a Showcase of them to :D
We should have them soon
I am waiting too :/ Q1 25 SAAADGE
I am so unhappy with this board. After one week the dashboard screen stopped working. It doesn’t even display debug codes.
@dimarcusa i'm in the same boat as you. I updated my bios about a week ago, and it went from displaying vitals and q r codes to literally just a loading screen not even displaying the temperature of either the c p u or the mos. They came out with a patch. It did nothing and yesterday again they came out with another patch, and all it did was bring back my c p u and mos temps. Yeah I can't say i'm happy either.
Got it already no problems with my Ryzen 7 9800x3d and Asus RTX 4090 woot.
Definitely a niche product for the 1% of 1%, but it’s just insane how high end hardware is priced so high. I fell into that trap of chasing the top of line hardware a few years ago and spent way too much just to have buyer remorse when new hardware is release a year later. Luckily, midrange is more than enough for majority of PC DIY
If you install an AIO or have a CPU fan, wouldn’t that cable be short? And if it wasn’t, wouldn’t it run over the top left screen and block some of the screen?
the idea of a controller box and less headers on the motherboard is interesting, however that means if the box fails, everything fails and your completely stuck.
Not really. There are more than enough headers on the board itself
@@GearSeekers oh i thought ill just buy another god motherboard to replace it -_-. Lol..this thing is just...2100AUD, most likely 2500AUD, its like the price of a 4090 (early days)
It does look pretty sick, especially with 15 USB ports at the back! But I can already see potential issues with it. The complicated lanes halving with two of the five M.2 slots, one of them running at default at x2 instead of x4. The Expander card looks interesting, but already there will be issues with airflow/mounting with larger GPUs like the 4090, including vertical mounts. That side EZBridge also looks nice, but limits those of use who like to use Lian Li strimers (most of it will be hidden).
X870E feels like a chipset that is not actually an upgrade but more one which has significant tradeoffs simply due to the structural limits.
I’m planning to grab this board been waiting since they announced the x870e lineup and still by till this date it’s not available in Canada, I might have to grab one for the states
That board really has some awesome features. I really like the 90 degree connectors and the lcd? display something unique but im not willing to pay more than half a months wage on a glorified mainboard. I just baught the MPG Carbon Wifi, that has most of the quality of life features as well and thats still around 460€ without a discount here in germany. Paying about thrice the amount is ridiculous. In addition to that i really like boards where you can still see the pcb
If I'm paying that kind of cheese for a board like that, it better be BTF built with a BTF input for a BTF GPU
I just bought it but its backorder.🤩Thanks for the video
probably the best x870e for dual 4090 or 5090 3d rendering machine with the 9950x. what a dreamboard this is
very nice looking board indeed Nick! all the motherboard manufacturers really need to give more love to their lower tier boards though as the prices keep creeping up but have lesser value.
you should try to give a review on the MSI X670E MEG GODLIKE AMD AM5 eATX Motherboard. it is a amazing mother board
I looked at the price of the X870E motherboards and my jaw just dropped. Not only the chipset and features are almost the same as the X670E. They are charging more for it. And no ACE model. So i went for the X670E ACE which is also overkill but it had the 10Gbe LAN port. 10Gbe networking is getting cheaper but motherboards are still lacking 10Gbe support. The highest is only 5Gbe. And only 2.5Gbe is getting mainstream.
Well for the SATA Cables it is a little redundant since most HDDs and SSDs come with their own SATA data cable but still if you want to cable manage for all your possiable future drives it will be nice.
Why is this tempting me so much? It's ludicrously expensive and not worth the cost of entry. Maybe when the AM5 Threadrippers come out and there are enough PCI lanes to use all the m.2 slots FULLY? Really love this board.
ok rich guy
Is this generally better and more expensive than Xtreme series from Gigabyte?
hello! im out of the loop, what RAM will you be using for this system?
9 seconds is all it took for me to close this video.
2x Front Panel Connector?
There’s not a Chip out right now that would even take advantage of these over the top features, not even when overclocking. Everything out right now runs pretty cool. I honestly like the ASUS Hero Board over this.
for the price only thing is missing is a pcie 5 plx chip
I have the x670 godlike, is it a major upgrade over that? My motherboard JUST got firmware to support my x3d cpu
Got mine ready for my build its going to be fire! 😁
@@PaulMalin-l2r why drop that much on a motherboard
What RAM are you using?
@@soniccage7045why care about what other people do with there money?
Does it come in white?? 😅😅
At this price you should just get a Threadripper system... then you won't have any lane sharing/bandwidth/expansion compromises and you can also go crazy on RAM. Sexy board with some nifty inclusions all the same.
Are the m.2 hot swappable? I thought pcie required you to power off before pulling them
Who even needs to do that?
5:12 rip pins
reminds me of the ROG CROSSHAIR X570E...thing is a monster and what i use currently. idk why i decided to go old generation but i got the thing about 16 months ago and even with how old it is was still worth like $800. Has all the bells and whistles especially for AM4. This is actually the first MSI board that i could see myself wanting, but nah i still prefer Asus.
14:30 hit the nail on the head, hence why I bought one as well 😂
All that price to get replace next year
the hot swappable m.2 is INSANE
Man i wish the godlike came in a white version that would be an instant buy for white builds..
the xpander is not hot swap storage.
Or get a decent b650 or X670e mobo, I got the aorus x670e ice for an all white build.
So now you have to pay $1k to get a back cover plate ? I bought the Aorus master at $500 with no back cover 😢
It actually is a problem. I have an adapter for four drives that I use all the time. It's disgusting they can charge that much for a board with only one by 16 PC IE slot
Awesome video! Freaking amazing board. I know where my income tax going to 🤣🤣
Gonna be my “forever board” 🤣🤣
i triee to preeorder this in norway but they just said its to difficult to get hands on atm
No stock in AU yet ☹ going to go great with 5090 and MO-RA IV cooler👍
Would love to see a Unify for AMD
My room wall sez that it wont be as swappable as I think it its going to be.
Can the GODLIKE fit two 4090size graphics cards without extention cables
This or Rog crosshair x870e hero?
Hello, time stamps are different; it's the same time stamps as in your previous video.
In europe its 1400€ at best and that is far more then in the us.
You can get a windows key for cheaper on G2A I spent $20 for mine
It is realy Hot Swap M.2 ?
i really like what they did here. too bad i'll never be able to afford one
I just bought mine! I’m gonna pair it with a Optimus cpu water block!
Best motherboard ever made imo.
I got one and there’s no difference with like a $200 to 300 motherboard
I can't wait for people to buy it in like 10 years, for their "top end retro build"
and pay like 120$ for it and complain how expensive it is
Just when i thought i have seen too many USB, how about 5 Type C and 2 USB 4?
AND 10G LAN!
I think this board is gonna cost 2000 SGD 😢
Back in 2020 I got a z490 Godlike from MSI for for $750. I'll never buy another mobo for that insane of a price ever again lol. Honestly, I regret it. Cause it really lets the CPU perform at it's best possible, but do I want to get a lower end mobo for current gen processors? Not really, but again I really don't want to spend that much on another mobo.
If I ever were to build a pc game console, and money wasn't an issue, that's the board I'd use...
These prices are just stupid.
I really wish they made an X870E Ace... I feel like that was the sweet spot for me. The Godlike is way too much.
I think it's coming. Probably see it at CES
Another $1,000+ dollar motherboard that doesn’t include a physical manual. PDF’s are inconvenient to reference in the middle of a build, and I hate this trend.
The z790 godlike went from $1200 to $470 is what I paid just wait to eol.
These top tier boards never make sense
just ordered today for xmas
I'm not sure how I feal about this one I think somethings could be better, what's the point of having ATX e motherboard if all your connectors rely one proprietary connector? that is so simply removable? MSI You might as well add a wire and move these ports to the backside of the case. It makes more sense this way! The arrangement and size vs practicality doesn't add up. also there's to many small flashy useless screens, why not add one really good one? with useful info like per core temps or 4k oled or something?. or even boot information! also the mate black paint job doesn't really make it look like anything special. I could buy some Doller store mate black spray paint in a can and turn up the same Finnish. Final thoughts do you need all these ports at the cost of impracticality? hopefully you not buying for looks alone! I was drawn to godlike boards in the past but for this one I may just go with the carbon this time around.
I swear not even overclockers will use everything this board will offer but holy hell that price tag on it 😂
Mine shipped today can’t wait to throw a 9950xd in it with a 5090
im looking for a white x870(E) board anyone got suggestions?
skip the AORUS PRO ICE :P
The past few months I have been watching sooo many videos including a lot of yours just to try n find the perfect case to fit this motherboard, a hopefully future-coming 5080 noctua x Asus card and the not-much-left-of-Q4-coming seasonic x noctua PSU 😅😊 very difficult!
Also moar difficult because the vrm screeny bit on the left might block an NHD15 g2 in a similar way the 2nd fan on that cooler limits ram height to 33mm 😢 because even though a board of this type deserves an open loop, I am a noctua and aircooling fangirl so this might be a deal breaker, so taichi or one of the others maybe.... And yup, ik ik its a nice problem to have but for my first ever build and after a lot of personal stuff in my life, making a system with this mobo would be lovely 😊
If you want a case for this board get the MSI Meg Prospect 700R, I'm rocking one myself and it's a fantastic case with excellent airflow, my only negative with the case is that for the money the fans they use are cheap s@it, so just use it till they go, then replace the fans.
@@Excalabur50 that's a interesting looking case but would benefit more either closed or open loop and I feel I'd like to do aircooling :) but thank you for the recommend, this case was not on my radar so I'll look at it more in depth
@@the.scarlet_witch.official No problem and it can do either closed loop or air very well, I'm using an MSI S360 AIO and my 5950X just doesn't get that hot even during our 45C summers it's 27C now at 40% humidity and my CPU is 40C whilst watching RUclips.
There nothing godlike about it if it still split lanes when m.2 slots are used.
Been waiting to waste money on this thing and placed my order on the MSI website. Now just waiting on the 5090 and 9950x3d to pair with this board.
I love all the extra usb c ports. But thats just too rich for me.