7018 Stick Welding Tube to Plate 5F
HTML-код
- Опубликовано: 31 май 2024
- weldmongerstore.com/blogs/wel...
Visit my store at weldmongerstore.com/collectio... for TIG cup Kits, TIG Fingers, Gloves, Tungsten, Filler metal, and other quality welding tools. New products being added weekly.
A simple 5F tube to plate weld test using 3/32" 7018 at 90-95 amps 
Хобби
![A Day To Remember: Feedback [OFFICIAL VIDEO]](http://i.ytimg.com/vi/iXVnysmQ4e0/mqdefault.jpg)
I am posting 30 videos in 30 Days for August …customer appreciation month at weldmonger.com. Lots of deals and giveaways going on too but you will need to sign up here weldmongerstore.com/blogs/weldingtipsandtricks
Afew years ago i had to pass a 6g test to go on a mine site here in Western Australia. My job on the site was just to tack up base plates to columns then another guy would weld them out behind me. Thats right folks had to pass a cert just to tack up baseplates
Sounds like me currently working in fuel terminals, had to pass xray for 7016TC 5G, 2G, 3F and 4F. It has been about a year now and nothing has been Radiographed on site. Just MPI and hydrostatic hahaha
i can welding 6G
Still happens today , I'm a fitter / boilermaker and some sites I'm not allowed to weld as not coded or passed out ... Lot of Korean and Philippines welders now doing welding on sites
Bet the longest wait was for the hot work permit, and the safety induction for the new area. Only then can you actually step foot and see what you are going to do. 5 minutes of work, 2 days of preparation, a week of training, which means he now has another cert on his toolchain to use.
We had no one certified for a very specific and critical weld at my shop. The mfg sent one of their engineers to our facility to check our welding equipment. Two days later they flew out a welder with his own roll of wire and had the gas company deliver a bottle of 'special' mix. (The exact same stuff we had 12 bottles of. From the same supplier.) The welder loaded his wire in our machine. Ran a few test beads on a coupon using the engineer's settings and went to work. 8" of bead in 4 locations (about 15 minutes) later he packed up, took his spool and flew home.
A farmboy could have done the welds with a buzzbox and had the same results. But, being it was a government job, lawyers and politicians are involved. Nothing without a CYA paper trail.
More Stick Welding tips please :)
I second this and it’s because I rarely do it so need all the help I can! Next year I’ll do a cert in it but for now it’s just when I have no choice.
More more
What a great camera. It helps me big time to see so clearly what that stick and puddle are doing with an expert on the other end. To see what I should see through the lens.
Thank you Jody. I really appreciate your stick welding videos.
I appreciated the constant walk thru & bits of knowledge throughout the video. It's evident that you guys have been in the field for a while & have extensive knowledge of welding. This video just happened to pop up on my feed but I'm definitely gonna bookmark it & check out whatever else you guys have 4 videos. Thanks for a well made, instructional type video that has some relevance. There's too many people with the ability to make videos that should not. Mostly for the lack of knowledge in the field, especially on the safety side of things.
In the end, he left that cap crooked because he didn't have a hammer with him, and he didnt' want to climb back down; if he wasn't on camera, he could have unhooked his harness and used that hook as a hammer and tapped the cap over straight again-- Next time I bet he'll remember to bring a hammer though. :)
Preferably tied to a lanyard, so he can't accidentally drop it.
Everything is a hammer. Unless it's a screwdriver... then it's a chisel
@@jokim99 but if you have 2 screwdrivers…
@@jokim99 Is that like "Anything is a butt plug...if you are brave enough"?
Thanks for sharing with us Jody. That was interesting to hear about. Fred.
Tig weld on a 2inch socket ! 2 runs when I worked in refinery an gas plant ! No stick weld ! Sparks ! Build a hampy for sparks and gas monitoring
Good to see Andrew back.
Looks like Andrew isn’t too worried about his hair catching fire 😮
Braver than me!!
You are the best! Herbert from Brazil👍🏾
Great to show a real world application!
nice, thanks for the lesson
Nice welds!
Excellent video
U have best knowledge and skill
More videos like this please
Soudure à l'arc superrrrrrr.
Merci
I have to do this alot where I'm at. Only diffrence is the 12 to 3 o'clock positions are obscured and. It visible so I have to mirror it with stick and it allways is a PIA to do. But I'm glad I get to do it because I know my welds will pass QC. And if someone else did it where I'm at it would most likely fail and I'd have to do a repair in the field lol
In ASME if you qualify welders on 2" XXS groove welds they are qualified for this fillet weld also, unless ASME IX [QW452.6] has changed from a few years back...?
Im Just starting 5F and having some trouble. Am I suppose to have a technique/pattern when welding?
I wish I could lay a beautiful bead of weld like that; with stick
Good 👍❤
Lots of hoops to jump through, I am interested on how he charged his time for this job
Probably 2 hour minimum. You have the drive there and the setup and clean up after. It's not worth doing all that for actual time of work. Big companies like this don't mind though -- they'll take care of you if they can rely on your work. A lot of times they will pay for gas and pay you by the mile also for the windshield time. If you have to stay for more than one day on a long trip -- typically they'll pay $200 per day per diem also.
@@calholli Good information, thank you. Would it be typical to charge for the time involved with the cert for the customers specific need?
@@T_Humphries If you already work for them, then a lot of times they will pay you for the cert time- or at least cover the cost, etc. but for a random customer-- No. They would just go hire someone who is already certified, rather than paying you extra just because you're not qualified for the job yet. But like I said, if you're already an employee there -- then it's in their best interest to help you get certified.
🔥🔥🔥👍👍
In my opinion,small bore it should be used GTAW welding process.
Lol u could tell andrew aint workin for lincoln anymore wit that spraypainted hood haha no way Ol Red allow that
Why thickness was the rod
On the certification he said it was 3/32”
I didn’t hear him say on the field job if it was the same.
It sorta looks like he's "pushing" with the angle.... ?? not a problem obviously.
Seems odd nobody at the plant had a pipe threader.
Then again maybe they didn't want the cap to be removable.
I can't tell by looking if it is threaded in to the elbow or not.
Surprised he didn't have to have a hard hat, hearing protection, vest and a company minder surveying the air for flammable compounds every ten minutes.
Granted the air surveying would probably be part of the hot work permit and probably out of camera range.
I kind of get it, there are a few big plants near me and the deaths and inquires are nearly always contractors.
These rules are "written in blood" but on the other hand it seems like they have over done it.
If a company man has to plan out and approve every step you are going to take in triplicate and then watch you do it, is it really any cheaper to bring in a contractor?
If the contract companies could train their guys to not walk of the edges of buildings, LOTO, gloves are not impenetrable force fields and other general safety things it seems anyone on an industrial site should know maybe the contractees wouldn't have to treat them like special needs children.
Great video as always!
Thanks for showing us the end result of all the hubbub.
I was thinking he would be capping a still leaking 30 inch pipe 100 yards in the air or underwater or something.
It was something more mundane but work is work.
👍👍👍🇧🇷🇧🇷
I guess no inspection on this job, you never should be grounding to the outside of pipe like that.
Enlighten me, how should he have grounded?
Not trying to be a smart aleck.
Just trying to learn.
yes i can
Slick
Toob2plate