37. DHCP Server & Inter-VLAN Configuration in Hierarchical Model #3 | Advanced DHCP & Multiple VLANs
HTML-код
- Опубликовано: 11 сен 2024
- PLEASE SUBSCRIBE TO MY CHANNEL
Part 2: DHCP & inter-vlan CONFIG: • 36. DHCP Server Config...
Part 1: DHCP SERVER CONFIG: • 35. Router DHCP Server...
SVI Configurations: • 34. Inter-VLAN Routing...
Router-on-a-stick Intervlan configs: • 33. Inter-VLAN Routing...
OSPF CONFIGURATIONS; • 32. How to Configure O...
OSPF Basics: • 31. OSPF Basics Explai...
EIGRP Configuration: • 30. How to Configure E...
Introduction to EIGRP: • 29. EIGRP Explained in...
RIPV2 Configuration: • 28. How to Configure R...
Static Routing: • 26. How to Configure S...
Default Routing: • 27. Static and Default...
Please subscribe to my channel, thanks for your support good people. LOL
PLEASE SUBSCRIBE TO MY CHANNEL
Part 2: DHCP & inter-VLAN CONFIG: ruclips.net/video/EaVP9fuFBMA/видео.html
Part 1: DHCP SERVER CONFIG: ruclips.net/video/cFjWa-3LNE8/видео.html
SVI Configurations: ruclips.net/video/-myH7HmPUrs/видео.html
Router-on-a-stick Intervlan configs: ruclips.net/video/ZJXZzGcaawU/видео.html
OSPF CONFIGURATIONS; ruclips.net/video/LBj9IUrm5P8/видео.html
OSPF Basics: ruclips.net/video/O0Ng7NcrLCc/видео.html&ab_channel=GurutechNetworkingTraining
EIGRP Configuration: ruclips.net/video/eG63rY9v4to/видео.html
Introduction to EIGRP: ruclips.net/video/i-q7QI9PRyM/видео.html
RIPV2 Configuration: ruclips.net/video/G6YJrWCaWjk/видео.html
Static Routing: ruclips.net/video/LMj5fErPlv4/видео.html
Default Routing: ruclips.net/video/C_D7yi8C-Us/видео.html
Please subscribe to my channel, thanks for your support good people. LOL
You have a L3 switch in your network...but do not use it to route. So what is the point of having it there if you could have just used an ordinary switch?
As a smart guy, you can use it to route, thank you!
Very useful. Thank u❤
Cheers 🥂
Can you do a lab on
2 different ISPs for HA
1 HQ
3 Branches in
3 different locations are connected using VPN and HQ and all the branches should have an ASA firewall (ASA5506-X) .
the firewall should have 3 Zones Inside, Outside, DMZ (ZBF)
Should be a DHCP server for IP release (HQ and Branches)
Subnetting should be there.
Minimum 5 Vlans
inter Vlan routeing between HQ and Branches
each branch should have at least 2 Servers (any WEB, EMail etc...)
Hq should have servers and branches should be able to communicate with the servers.
Okay noted
WOW! This is a really good one can you do it before the end of this month Pleas 🙏🙏🙏🙏🙏🤝🤝
I was also looking for something like this
I will add some more for the above requirement
Minimum 4 switches for HQ and Branches (HQ = 4, branch-1 = 4, etc...)
ACL to control the access between branches and HQ
ASA should have rules for blocking and permitting
DMZ should be protected using ASA(eg-: 2 web server 1 server only open for out side 2 server only for inside)
NAT should be configured
All the location shoul commuicate with using VPN only (SITE to SITE VPN)
All the locations should have wireless access with security enable MAC filter etc..
hi sir i am following your video very long time
my qustion is in this video my access layer switch is unmanaged how to create vlan and i have a one pc connected with d-switch different vlan now how can i manage d-switch and router by telnet or ssh also need to connection with different vlan devices like ap .
Unmanaged switches for configuration?
13:07 How do I display the port label for an extended period of time when the mouse is over it?
Change preferences settings and tick show port labels under settings
@@gurutechnetworks under the interface tab? When you hover your mouse over a port in a logical workspace, the label appears too quickly.
I do not understand, multilayer can route subnets, router is probably just to access outside or other far networks. Why do you route vlans in router instead of in multilayer (l3) switch
This was meant for intervlan routing on a router.
This was meant for intervlan routing on a router.
I am not professional but I am quite sure that you wasted multilayer switch. If you are not going to use routing capability of multilayer switch then why do you use one. Just connect edge switches directly to router. The same configuration etc. Why the hassle.
This was meant for intervlan routing on a router.