Creatividad al 100%, estética al 100%, pedagogía 100%, calidad del vídeo 100%, que más puedo decir de semejante proyecto, muy pero muy útil, en toda su esencia; lo que mas me gusto fue como se coloco la bomba del agua.
0:47 It's a little frustrating because in Brazil the standardization of PVC pipes is different from the rest of the world, for example, there is no such piece to sell here, and in my opinion it would be vital for the project
For the acrylic intake after u cut the holes don’t u need something to block the hole of the pipe like I see on my commercial one ? I don’t know how to make that
yes, the purpose is to help the tube keep it's shape when bending. otherwise it'll kink/collapse. common practice when bending pvc/abs tube without proper equipment.
Oh, I got that at bending the pipe at 8:32. I was talking about when applying the top elbow . There was sand and crazy glue at 6:07@@onlyslightlybent4278
@@kevinjoyce9113 oh my bad, yes you can add fine dust, sand, baking soda or even cotton to help aclyric glue adhere better and help fills gaps between the materials. it provides more surface for the glue to adhere to. but be careful when using these method the glue will become hot, even with visible smoke/vapour sometimes when used with cotton and baking soda.
Creatividad al 100%, estética al 100%, pedagogía 100%, calidad del vídeo 100%, que más puedo decir de semejante proyecto, muy pero muy útil, en toda su esencia; lo que mas me gusto fue como se coloco la bomba del agua.
La bomba debería estar sumergida, se queman así al exterior
Kudos for your work of inlet and outlet hose making. That's really impressive work.
This was very satisfying to watch. Pretty awesome work there.👍🏼
Such a cool little filter diy awesome
cool idea and inspiration for my next project ... :o)
good video you did very well
Roses are red
Buds are dank
Him filter's as big
As him gawt-dang tank!
great mini table saw, can you make video how to diy that table saw that you use?
Why not just use an endcap for the bottom ?
My thoughts exactly.
You beat me to it ! Lol
Woo impressive 👏 that's a real nano aquarium
thank you so much!
what are the L hose connectors called where can you buy them?
0:47 It's a little frustrating because in Brazil the standardization of PVC pipes is different from the rest of the world, for example, there is no such piece to sell here, and in my opinion it would be vital for the project
O mais próximo que achei foi esse, "Tampão Final 75mm Rosca Para Irrigação"
What size elbows did you use?
Good job bro
nice
Lumayan hasil nya
super.... good job
Awesome 👌
amazing job man. cheers 🔥
Kudos
Xin hỏi dùng keo gì vậy, xin cảm ơn
For the acrylic intake after u cut the holes don’t u need something to block the hole of the pipe like I see on my commercial one ? I don’t know how to make that
No sure if this is the owner of the company but this filter looks very similar to the tru aquatics nano canister filter
Yes because tru nano is made with pc piping and the same sort of pump. its not a patented product
Can i place it on the floor ?
why did you put some biomedia in a bag and some without ?
Qual o nome dessa peça principal que é tem rosca(canister)?
Which pump is this
what is the size of elbow?
Sir mera aquarium tut gya sara pani gir gya fishes to bacha le meme but ab new aquarium me new water me kase rhu wo cycle nhi h to muje kya Krna chiya
Super
Có bán không bạn
Yg kayak pasir di lem itu apa gan?
My only advice would be to not wear any type of gloves when cutting on a table saw. Very easy to catch it on the blade.
What is the name of the father of PVC ?
عالی بود مرسی
Good
Jenis pompa yang di pakai apa ya om
Pompa dc 12v
Moto link
Dùng cưa mà đeo cả bao tay, chú này chắc vnam rồi
Sambungan L yg warna hitam itu pakai apa? Namanya sambungan L apa? SIZE berapa mm?
Pls make a diy Aquarium chiller. I made somethg bt not that successful. Help me out 🔥
Buenas, tengo entendido que esas bombas, si no están sumergidas, se queman
At 6:07, is that sand???
yes, the purpose is to help the tube keep it's shape when bending. otherwise it'll kink/collapse. common practice when bending pvc/abs tube without proper equipment.
Oh, I got that at bending the pipe at 8:32. I was talking about when applying the top elbow . There was sand and crazy glue at 6:07@@onlyslightlybent4278
@@kevinjoyce9113 oh my bad, yes you can add fine dust, sand, baking soda or even cotton to help aclyric glue adhere better and help fills gaps between the materials. it provides more surface for the glue to adhere to. but be careful when using these method the glue will become hot, even with visible smoke/vapour sometimes when used with cotton and baking soda.
Nama mesin pompa nya apa?
Looks like eheim 2260 filter
Can you make for me iwill pay
Salam kenal adi jaya putra gabung
Vikat milel kay
Can you do me one... I can pay you 😊
hello. this is no diy for me. this is big job..
7u
hello , i liked the video , i sent you an email , could you reply , thank you
Aquarium Canister Filter Rs.350 | DIY Make Aquarium Filter at Home
ruclips.net/video/hZq9OAQMDoU/видео.html
Good