Delta RP70538 Overview
HTML-код
- Опубликовано: 29 апр 2018
- Replacement Tub & Shower Faucet Cartridge For Delta RP70538
This Cartridge Fits Most Peerless Pressure Balance Tub & Shower Faucets as Well as Several Delta Models Found at Home Depot & Lowes
BUY HERE: bit.ly/2I2FnBa
#DELTAFAUCET
#RP70538
#DELTAFAUCETREPAIR
Website: plumbingpartspro.com
Email: info@plumbingpartspro.com
Check us out at Plumbingpartspro.com for all your plumbing needs
Email: info@plumbingpartspro.com
Instagram @Plumbing_parts
Twitter @Plumbing_parts
Website www.plumbingpartspro.com
**********EQUIPMENT USED TO FILM**********
CAMERA amzn.to/2sCv91m
LIGHTING amzn.to/2AT1jdj
TRIPOD amzn.to/2SXW2Iu
MICROPHONE amzn.to/2Mk0nTT
LIGHT STAND amzn.to/2Dl4UTm
We Stock What Others Consider Special Order! 
Хобби
after watching your video & this being one of the more $$ carts I decided to take it apart. I noticed the date was in 2005...so 16+ yrs of those springs being compressed. I took them out and with needle nose slightly made them larger ensuring they’re were the same length. Just a note, just make them barely longer. I then added a lil petro jelly on the gaskets/o rings/seats and put it back together. After 2 years of leaky drips from my shower head no more leaks and works like brand new! Thanks 👍🏻💪🏻
So show me how to install the damn thing!
question; my Delta cartridge appears to be 70538 but the brass arms located on the cartridge (unsure of terminology) are not in a straight line but more angled. Not at 12 o'clock and 6 o'clock but 12 and 5. Is this okay or do I need a different cartridge
How to set the hot and cold water level for this one??
Hello - the top piece of the cartridge came off and it doesn’t go back on flush. There seems to be a little pressure keeping it from being flush. Is this a lemon part or am I missing something? Thanks in advance.
Can a pressure valve work of there is no hot water? I install one and it won't work I double check everything was done correctly
It looks like the same cartridge that I have. I am installing a new " Delta B114900C-SS Foundations Single-Handle Spray Tub and Shower Faucet " in my shower and have capped the tub faucet line but I cannot the shower to run like it should I just have a trickle when opening my valve, can you help?
What the little white plastic part on the top called
I'm desperate to not change the original valve in the wall, (I think it's PTR188700) but I am frantically looking for a "modern" style chrome trim kit that is compatible. I don't care what brand, just something with sharp lines like the Peerless Xander, or the square Kohler trims. Please tell me what adjustments/clone brands/discontinued stock/retrofit are available for use in this case. (Original handle escutcheon says peerless 8700 series.) THANKS FOR ANY SUGGESTIONS FROM ANY people who have experience with this. Cheers!
Do you have both pieces in stock or just the cartridge ?
Thank you very much for the video. I have a question in order to change the cartridge or adjust the temperature. Should I close the main water valve?
YES!
Guess I should’ve posted in the public area lol. I just bought a tub/shower set that has this cartridge, and the pressure is terrible. Is there a mod, or something I can do? Replacement of the cartridge? Or should I just get a new set from a different brand?
make sure you have the hot and cold water valves on. if you are testing it with only hot or only cold it will give you no pressure. also check the water pressure with the shower head off. sometimes it gets debris inside it.
I have water dripping on the tub spout . The cartridge model is the same RP70538. My question is for the leak. Do I need to replace the valve cartridge or the check valve?
Most of time The cartridge unless the check valve is cracked then you need both
Hi there, just wondering if you can help me. Our shower cartridge is leaking but I don't know the brand or model of the ceramic cartridge that needs replacement. The top portion of RP70538 looks similar to the one I have but the bottom is different. Can I send you some pictures as you might be familiar with it? If I can't find a replacement, our plumber said he will have to replace the valve and get a Moen one instead.
Sure. Email me some pictures and I will take a look
@@PlumbingPartsPro Hi there, I sent you an email last night with some pictures attached. Thanks in advance.
How do it work when u interested it?
If I'm just replacing the cartridge and not the check valve, do I need to cut off water to the valve elsewhere first?
Yes. Or wear a raincoat . I've had to replace before when I couldn't find water shut off. Pull the shower curtain shut, have the new cartridge ready and yank the old one. Work fast lol.
Bought this same product main water valve is on but does not come out my shower , i do not have a spout just shower
Make sure the cartridge is installed in the correct direction. There is an H & C on the bottom side of the cartridge. Also if you have isolation valves on or behind the faucet, make sure both are in the on position. If you turn one side on only without the other you wont get any pressure due to being a pressure balance cartridge. It needs equal pressure on both sides.
If the piston is stuck, can I give the handle a firm tap to free up the piston
Not usually. It typically needs a new cartridge
How can I can I change the water temperature on these? Or is that not an option on this model
You can adjust how far the handle turns by rotating the plastic cap on the gear on the newer style or adjusting the brass stops on the old style, however this is something that rarely ever needs adjusting. If you are lacking hot or cold water, most likely the cartridge is bad. There is a scald guard feature in the cartridge that could become stuck giving either hot or cold water only.
I have this facet and I have no pressure would it be my cartridge I pickle it out and have tons on pressure tho
Yes most likely. There is a pressure balance spool in this cartridge to prevent scalding. Sometimes it gets stuck in wont let the water flow through freely.
Just bought a tub and shower set and the pressure is terrible. Is there a mod for this or do I need to buy a new cartridge? Or a different brand of everything maybe haha?
@@ncham1848 I removed the check valves and increased my preasure but I would like to have the check valves in place but remove the flow restriction if possible.
Do I need that check valve to install it
The check valve must be installed. However if the old one is ok you may not need to replace ut
Thanks for the reply @@PlumbingPartsPro ! I’m replacing a different delta cartridge with this cartridge. bought this part online but didn’t come with a check valve. Could I still use the check valve from the old cartridge on this RP70538? Or does this cartridge need it’s own specific one
I removed the check valves and increased my pressure but I would like to have the check valves in place but remove the flow restriction if possible?
Have you tried removing the restrictions in the shower head itself? Mist are limited to 2.5gpm or less
Yes I have done that. It's a trickle out of the bathtub Faucet as well.
What about a new cartridge. The pressure balance feature built into the cartridge could cause reduced pressure. It's a safety feature incase you loose pressure on the cold side you will not get scaulded..
So I have good pressure now, but I removed the hot water check valve now I have to turn it almost all the way hot to get warm water.
It sounds like a bad cartridge
Can I put a delta handle on a peerless faucet
Sometimes. It depends on if it has a handle adapter extension on it.
A little disappointed that the video didn't address adjusting the temp. This is a common problem, as the manufactures seem to assume everyone has a small child that could be scalded, so it's set to go no hotter than warm. I replaced my cartridge and have this problem. Can this cartridge be adjusted, and if so, how? Thanks for any replies.
You can adjust the temperature by rotating the stop. This is in the very front of the cartridge. If you have the Genuine Delta version there's a Greenish blue cap that comes of and you can rotate on the gear. The generic version has 2 brass arms on the gear that you can rotate to allow the handle to turn further
@@PlumbingPartsPro Thanks! I'll try that.
Thank you very much for the video. I have a question should I close the main water valve to change the cartridge or adjust the temperature?
@@genaroaguirre2142 YES!
I replaced cartridge, trim sleeve, and handle. All parts were lost during remodel. I ordered them from plumbing parts store, so parts are correct. Water runs normally even when handle is in off position. What am I missing? Something to do with check valve maybe?
Possibly. The check valve is about 1/4" thick that fits behind the cartridge. It has gaskets on both sides and if it's missing I'm sure it would leak
I had the same problem. Make sure the check valve has the blue rubber piece. My shower faucet would still run when in the off position and I was going to call a plumber when I decided to take everything apart and have another look. That is when I noticed thin rubber piece missing from the check valve. Luckily I found that piece on the floor and was able to put it back in. Worked like a charm.
How can I order?
Go to plumbingpartspro.com to purchase
Replaced my valve with one of these, and water is still running out of my shower head, what am I missing?
It won’t turn water off.
Make sure the check valve, (Back section) Is not damaged or cracked etc...
@@PlumbingPartsPro Ok thank you for your time, I’ll check the check valve.
Did you ever fimd the issue?
What works
Can you give us a more detailed question other than what works?
I just can’t find the correct delta Carthage to fit my shower that I have installed with a valve body from Home Depot Im sure it would work if i new the number of the cartage rp70538
Is this the correct number
Yes
Useless review. Im installing the valve. All i get is cold water
A bad cartridge will cause all hot or all cold water due to the pressure balance spool getting stuck on one side
question; my Delta cartridge appears to be 70538 but the brass arms located on the cartridge (unsure of terminology) are not in a straight line but more angled. Not at 12 o'clock and 6 o'clock but 12 and 5. Is this okay or do I need a different cartridge
Mine too. Turning all the way to hot , stops water flow. How to adjust the the brass stops? I see a pin on one but it doesn't want to budge.
Also wondering how to adjust these. Any answers?
Did you ever figure this out?@@scottlawrence1625