Sir Tanveer sb is a best teacher of MEP works on internet. His lecturers helped everyone too much. May almighty Allah give him special reward in this world and hereafter.
thanks for very informative video. As you are aware there is always a problem of space in any of the building design so can we use this lift pressurize fan for fresh air for basement with fire damper. so, we can use single lot of fans for both purpose with application logic.
excellent explanation sir, please kindly explain testing, and inspection of pressurization system and any NFPA norms need to follow for inspect system.
Thank you Ahmad sahab. You are genius. I am also grateful to you for this kind of rate information. I am also an Engineer in a govt Department but my areas are very very wide therefore no time to be expert in all fields. When it comes to understand ventilation and Fire prevention then your video gives me concept. In my department,which is Civil engineers and Architects based department No one is clear on it. Thank you very much. Kindly tell me whether can you advise if required for clear concept ?
Thank you very much for the vedio plz also share how to calculate the capacity of stair case pressurisation fan and smoke extraction fan for lobby area.
@@TanweerAhmed Ok sir. But actually in staircases there are conditioned air . Today I visited RMI Hospital Peshawar. And noted that there is cooled air in staircase as well. So question is arised that basically we do air conditioning of staircase or not?
This Pressurisation fan supply positive air which required in case of fire then at fire time who required comfortable air? If it is conditioned air then it is amazing
Hi Sir, Can you please explain on below, 1. How much is the differential pressure setting in the fan pressure switch.What will happen if the differential pressure increases or decreases. 2. Is there any insulation or coating or painting on the ducts. 3. What is the Smacna standard for these ducts.(Duct guage etc). 4. Is this a fire rated duct. 5. Does the Staircase duct travel till ground floor or it is as shown in the drawing till top floor only. 6. Are both Lift or stair pressurisation fans both of same type? 7. Please let us know the calculations of the same. 8. In which case we use centrifugal fan and in which case we use for axial flow fans for pressurisation systems.
Because we have to force pressurised air all the in staircase or lift well as smoke can not enter there and peoples of building easily evacuate through staircase or ....
Sir Kya GF ka door open condition me rhna chye jb pressurization fan chal rha ho ya pher close hona chye? For example agr 1 bnda door open kr k bhr nekal gya ha to door automatic close hona chye full ya pher thora open condition me rhy ga? Koi NFPA standard ha asa to please bta den
Normally all doors remain close because pressurised fan develop pressure according to design requirements. Further standard references check at your end.
Durring summer, when humidity is more, what is the solution to to reduce condensation as my lift lobby have 18c temperature and stair case have no ac, also when alarm came hot sir enter to lobby making condensation. Please guide sir
Assalamualaikum Eng.Tanweer sir Thanks for knowledgeable video with all photos, CAD drawings and realtime images.👍👍👍👍👍 Can you please provide how design viya calculations as well as drafting skills.so I can learn. Can you please add a next video as for BMS: how to control Chiller,AHU, FCU and what are set points and other parameters ,alaram signals Anti freeze points , differential pressure , temperatures .and how to fix alaram signals .what to do chiller/machine trip what alram sounds /signals I Request you to please upload a video 🙏.I want to join facility management company .I have no knowledge about bms control.
Good evening everyone, please anyone can guide me about staircase Pressurisation system. My fans are on the roof & will equipped with overpressure relief damper with Actuator. As per the consultant requirements overpressure relief damper has need to be released the pressure when pressure will reach upto 60Pa. Can I use the differential pressure switch to I'm the staircase to sense the pressure & damper Actuator can operate through it.
![Stromae, Pomme - “Ma Meilleure Ennemie” (from Arcane Season 2) [Official Visualizer]](http://i.ytimg.com/vi/1F3OGIFnW1k/mqdefault.jpg)
Designing of Staircase Pressurization System: ruclips.net/video/1CdC1p49sLw/видео.htmlsi=bWihxIVL4U5veWGT
Sir Tanveer sb is a best teacher of MEP works on internet. His lecturers helped everyone too much. May almighty Allah give him special reward in this world and hereafter.
Jazaka'Allah
thanks u nice video sir,
Welcome
thanks for very informative video. As you are aware there is always a problem of space in any of the building design so can we use this lift pressurize fan for fresh air for basement with fire damper. so, we can use single lot of fans for both purpose with application logic.
Yes it is used
Much dedicated effort.
Must be appreciated 👍
Thank you
Love u sir....each and every thing clear....
JazakaAllah
Thanks sir your video is very informative
JazakaAllah
Very informative video sir! Thanks a lot.
Welcome
Your videos are really informative
Thank you
Jazakallah khair ❤
Alhamdullah
Thank you sir thank you
Welcome
Bhoot khub bhai saheb
Alhamdullah
bohot acchi video tha sir
Thank you
Sir Great Explanation.
But One small Doubt , How many core of Electrical Wire need for Connection.
Thanks.... depends on system power requirements
excellent explanation sir, please kindly explain testing, and inspection of pressurization system and any NFPA norms need to follow for inspect system.
Thanks. Watch my other videos regarding stairwell Pressurization System design and also question and answers for further details
Thank you Ahmad sahab. You are genius. I am also grateful to you for this kind of rate information. I am also an Engineer in a govt Department but my areas are very very wide therefore no time to be expert in all fields. When it comes to understand ventilation and Fire prevention then your video gives me concept.
In my department,which is Civil engineers and Architects based department No one is clear on it. Thank you very much.
Kindly tell me whether can you advise if required for clear concept ?
Welcome...If you have any question then write here in comments. I will try to replay or prepare video or advise accordingly.
@@TanweerAhmed Thank you. If email could be shared then it will be easier to ask my doubts.
👍gud work sir
Thank you
VERY INFORMATIVE VIDEO SIR
Thanks
Good sir
Thanks
Thank you very much for the vedio plz also share how to calculate the capacity of stair case pressurisation fan and smoke extraction fan for lobby area.
Welcome and noted
Great explain sir.
Thanks
Great work
Jazaka'Allah and Thanks
V informative video.
Thanks
Sir plumbing fittings mein video
Ek practical video
Ok noted
Thank you sir
Welcome
salam sir hvac designing and calculations py b agr video bana dain to bht faida hoga hmara
Ok noted
Amazing video sir.
Sir this air is treated or just outside air?
Outside air without treated because this Pressurisation fan run in case of fire or emergency
@@TanweerAhmed
Ok sir.
But actually in staircases there are conditioned air . Today I visited RMI Hospital Peshawar. And noted that there is cooled air in staircase as well. So question is arised that basically we do air conditioning of staircase or not?
This Pressurisation fan supply positive air which required in case of fire then at fire time who required comfortable air? If it is conditioned air then it is amazing
Hi Sir, Can you please explain on below,
1. How much is the differential pressure setting in the fan pressure switch.What will happen if the differential pressure increases or decreases.
2. Is there any insulation or coating or painting on the ducts.
3. What is the Smacna standard for these ducts.(Duct guage etc).
4. Is this a fire rated duct.
5. Does the Staircase duct travel till ground floor or it is as shown in the drawing till top floor only.
6. Are both Lift or stair pressurisation fans both of same type?
7. Please let us know the calculations of the same.
8. In which case we use centrifugal fan and in which case we use for axial flow fans for pressurisation systems.
You want to learn all in one comment...!😊
@@TanweerAhmed 😊Will wait for your future videos Sir.
Hi Sir, Hope you are doing well. Any video is coming on this topic. Please let me know. I am eagerly waiting. Thanks for all your support.
I have prepared reply of your questions and soon video or videos will be upload after recording.@@GaneshKamble-gd9cg
@@TanweerAhmed I am so much thankful to you Sir.
Greetings,
Dear Sir, why did they select a CAV-type fan instead of a VAV-type fan for this system?
Because we have to force pressurised air all the in staircase or lift well as smoke can not enter there and peoples of building easily evacuate through staircase or ....
Sir Kya GF ka door open condition me rhna chye jb pressurization fan chal rha ho ya pher close hona chye? For example agr 1 bnda door open kr k bhr nekal gya ha to door automatic close hona chye full ya pher thora open condition me rhy ga? Koi NFPA standard ha asa to please bta den
Normally all doors remain close because pressurised fan develop pressure according to design requirements. Further standard references check at your end.
@@TanweerAhmed ok thanks sir
Slab crossing pe Fire Damper lagega ki Nahin
No in this case
Can u share this DWG for a better understanding
Let me check and if found drawing then how forward?
@@TanweerAhmed ok sir
Durring summer, when humidity is more, what is the solution to to reduce condensation as my lift lobby have 18c temperature and stair case have no ac, also when alarm came hot sir enter to lobby making condensation. Please guide sir
Close the lift lobby doors
Assalam O Allikum Tanveer Bha....how do v calculate the required cfm for SMEF and SPF ? regards
وعليکم سلام،
Insha'Allah I will try
bht shukriyaa
Please prepare all videos on elevator complete course
Ok noted
Thanks for your information, Sir. But how to calculate duct size from top to ground floor, please reply
Welcome, same procedure ac ducting
Assalamualaikum Eng.Tanweer sir
Thanks for knowledgeable video with all photos, CAD drawings and realtime images.👍👍👍👍👍
Can you please provide how design viya calculations as well as drafting skills.so I can learn.
Can you please add a next video as for BMS:
how to control Chiller,AHU, FCU and what are set points and other parameters ,alaram signals
Anti freeze points , differential pressure , temperatures .and how to fix alaram signals .what to do chiller/machine trip what alram sounds /signals
I Request you to please upload a video
🙏.I want to join facility management company .I have no knowledge about bms control.
W.Salam,
Ok noted
thanks, my only problem is language barrier
Welcome
Sir, Can you Provide How to calculate the CFM in Staircase , positive and negative pressurization
Ok noted
Dear sir plz share design calculation for lift well pressurization
Sorry, Not available
Makeup air duct ke baare me bataye sir
What do you want to know?
Hello FAHU Ducting connection you know please Roof Top
What do you want to say?
sir how much pressure diff we create between the staircase and lobbies and its reference standard.
Ok noted
It should be Half
5 bar
How to calculate Pressurisation?
Ok noted
Good evening everyone, please anyone can guide me about staircase Pressurisation system. My fans are on the roof & will equipped with overpressure relief damper with Actuator. As per the consultant requirements overpressure relief damper has need to be released the pressure when pressure will reach upto 60Pa. Can I use the differential pressure switch to I'm the staircase to sense the pressure & damper Actuator can operate through it.
This issue discuss with your consultant, if he agrees then do it
@@TanweerAhmed Noted, but in general opinion is it possible to use like this?
@@Behuman0627 Yes use it
Hi dear can i have that drawing
Sorry, drawing is not available
Hi dear, good explanation great work, can i have ur mail id, i need this drawing.
Thanks