Lift Well Pressurization System Design || Elevator Pressurization System Design Calculations in Urdu
HTML-код
- Опубликовано: 21 ноя 2024
- Check out this tutorial video bout lift well pressurization system design calculations or elevator pressurization system design calculations in Urdu, where I break down how to design a Pressurization System using an Excel Sheet. The goal of this system is to stop smoke and hazardous gases from getting into the elevator hoistway through doors. We achieve this by pumping fresh air into the lift well. Why? Well, it's all about maintaining high pressure in the lift well, especially during a smoke and fire. This ensures a safe way out for people and also protects the electronic equipment of the elevator in the building. Whether you're a seasoned engineer or a curious learner, this video will provide valuable insights into the design process. Watch now to enhance your understanding of elevator pressurization systems!
If you find this video helpful, give it a thumbs up and subscribe to Tanweer Ahmed's channel. Thanks!
MS Excel Sheet Link for free Download: docs.google.co...
You can watch more of Tanweer Ahmed's following related videos:
1. Staircase Pressurization System || Lift Pressurization Fan
Video's Link: • Staircase Pressurizati...
2. Stairwell Pressurization System Design Calculations
Video's Link: • Stairwell Pressurizati...
3. Project Closeout Requirements | Part-2
Video's Link: • Project Closeout Requi...
4. Construction Sequence of Projects | Section-1
Video's Link: • Construction Sequence ...
5. Construction Sequence of Projects | Section-2
Video's Link: • Construction Sequence ...
6. Construction Sequence of Projects | Section-3
Video's Link: • Construction Sequence ...
7. Visit of Mechanical Workshop | Pipe Fabrication
Video's Link: • Visit of Mechanical Wo...
8. What is BIM ? | Building Information Modeling
Video's Link: • What is BIM ? | Buildi...
9. Interview Questions and Answers by Construction Mechanical Engineer
Video's Link: • Interview Questions an...
10. MEP Engineering | Introduction to MEP
Video's Link: • What is MEP Engineerin...
11. MEP Project Engineer | Roles and Responsibilities
Video's Link: • MEP Engineer Roles and...
12. Maintenance Engineer | Roles and Responsibilities
Video's Link: • Maintenance Engineer J...
13. HVAC Interview Questions and Answers | HVAC Job Interview Part-1
Video's Link: • HVAC Interview Questio...
14. HVAC Interview Questions and Answers | HVAC Job Interview Part-2
Video's Link: • HVAC Interview Questio...
15. HVAC Interview Questions and Answers | HVAC Job Interview Part-3
Video's Link: • HVAC Interview Questio...
16. HVAC Interview Questions and Answers | HVAC Job Interview Part-4
Video's Link: • HVAC Interview Questio...
17. HVAC Interview Questions and Answers | HVAC Job Interview Part-5
Video's Link: • HVAC Interview Questio...
#TanweerAhmed #liftwell #pressurization #system #design #elevator #fan #fans #mep #engineering #mechanical #well #shaft #tutorial #staircase
= YOU CAN FOLLOW ME ON SOCIAL MEDIA =
LINKEDIN: / tanweer-ahmed-00142631
TELEGRAM GROUP: t.me/hvacmepenggg
INSTAGRAM: / tanweersethar
RUclips: / tanweerahmed
Disclaimer:
Tanweer Ahmed’s videos are intended solely for educational purposes, aiming to assist junior engineers and technical individuals in enhancing their comprehension of HVAC and MEP engineering basics. The information provided is based on personal experiences and research. It is advisable to consult qualified professionals or adhere to standards before implementing any techniques discussed. Please note that I cannot assure the accuracy or appropriateness of the information presented for your specific situation. Viewers are advised to watch at their own discretion, understanding that I cannot be held responsible for any damages or losses that may occur. Any response does not constitute legal or professional engineering advice. Seeking the advice of a qualified professional specific to your particular application is recommended.
Thank you for watching, and I hope you find the content helpful.
Stairwell Pressurisation System Design: ruclips.net/video/1CdC1p49sLw/видео.htmlsi=wYqXl4AQnvpQ6npG
Very nice video Sir. Thank you so much.
Could you please also explain if possible,
1. The velocity to be considered while designing stair case duct/lift well duct and lift lobby duct.
2. Can you please explain the calculations of lift lobby exhaust.
3. Also if possible can you please explain one design of stair case duct or lift lobby/well duct and its esp calculations for fan selection. A short explanation video will also be ok.
4. Is there any insulation or coating or painting on the ducts.
5. Is the Smacna standard same applied for these ducts.(Duct guage etc).
6. Is this a fire rated duct or normal G.I. duct will be Ok.
7. In which case we use centrifugal fan and in which case we use for axial flow fans for pressurisation systems.
Ok noted
Ok noted
@@TanweerAhmed Thanks again.
I think you forgot to discuss the stack effect. The pressure is effected by stack effect. The stack effect is more pronounced in the winter. When it’s cold outside, the stack effect creates about 4 pascals of pressure for every floor of the building. In the summer, this drops to 1.5 pascals per floor.Stack effect is a result of different air densities inside and out of a building that cause the pressure distribution of air in a building to be different from that outdoors.
If you have any working about stack affect with any reference document then share with me on email. I will review and revise this video, if I satisfied with your working.
Sir please koi ek project bana Dona sb calculation ke saath full hvac
It will be boring, if I will make lengthy videos. Our subject is dry therefore peoples don't like to watch.
Sir you can make short videos of one project . It's very helpful to understand . If you take one project that will be good sir you can paid for this course
Ok noted
Thanks..
How calculate static pressure for lift well .. because there is no duct
How estimate suitable static W.G
Same procedure is calculation of static pressure like g.i duct
@@TanweerAhmed This results in a very small amount S.P due to the large size of the Shaft..
@@TanweerAhmed sir please
calculate S.P for pressurisation fan for lift case , and share with us🫸🫷
Sir,
Where did we get table number 5
from?
Explained in video
Can i hv link fr excel sheet and coses tia
Link is given in this video's description for free download
Plz explain stairwell pressurisation logic , how it starts
Watch my another video "Staircase Pressurization system"
Sir Staircase pressurization is triggered by fire alarm panel so how many detector has to be activated for starting pressurization.
Anyone smoke detector activation then fan shall be start because fire or smoke can be happen anyone location and staircase is for throughout building.
Why ceiling not considered here?
Because lift well level is 5 floors and only one top floor has roof. If consider one floor ceiling or roof then cracking area to be 0.002 which is minor, therefore I have no considered. Moreover, I have informed this reason in this video.
Yes u told in vedio. Thank you. Little fast , so watched once again @@TanweerAhmed
Okay
Can u email the lift well pressurization system calculation excel file
Excel sheet link is attached in this video's description for downloading
❤❤❤❤❤❤❤❤❤❤
Thanks