2001-2005 Toyota Camry Spark plug replacement

This is an easy maintenance done every 120k miles. The spark plugs are iridium and are pre-gap when you buy them.
Tools:
amzn.to/2awcRDO 3/8 ratchet
amzn.to/2aYXnIy 3/8 10mm deep socket
amzn.to/2aJy9kF 3/8 3" extension
amzn.to/2b47h1x 5/8 spark plug socket
amzn.to/2aE11KN Spark plugs 3M anti seize lube
amzn.to/2aCVoJz Ignition coil 3M die electric grease
Parts:
amzn.to/2xgX0qv Denso 3297
Torque specs:
amzn.to/2aDZqER 3/8 Torque wrench
14 ft. lbs - spark plugs
8 ft. lbs - ignition coil bolts
like and share this video!
If you have any questions or concerns, feel free to leave comments on our FB page.
Like us on Facebook
bit.ly/nutzaboutbolts1
and SUBSCRIBE!
bit.ly/NutzAboutBolts2

[@teamsour8640]

I did it took about 5 mins each cylinder thank you very much success!!!

[@angelisone]

But with a XLE V6 engine is a nightmare.
Got a video in a V6?

[@jeffkeryk3550]

I spray a little WD-40 to clean the threads; esp. on a car with miles. You might be surprised how easily they mesh and thread in.

[@Iknowyoumadnow]

Fool, do you want your engine to catch on fire!?

[@jaymeez]

Man I thought you guys were gonna do a tune up on the v6 model. That shit is impossible! The plugs up against the firewall are just not accessible

[@NutzAboutBolts]

Sorry, we don’t have the V6 engine, I’ve done those spark plugs on those engine before, it takes a swivel, short extention and it’ll work. They’re pretty fun haha but time consuming.

[@colinlindgren5105]

youre supposed to takew the inrtake plenum off....super easy

[@kali1547]

Damn, this shit so simple… My mechanic asked $250-300 for parts and labor smh

[@NutzAboutBolts]

Ouch lol it’s like 30 mins of work

[@bobbarker3248]

I don't think Toyota recommends using anti-seize on the spark plugs for these cars. However, using dielectric grease on the spark plugs isn't a bad idea.

[@stevenolson3930]

Don't need antisieze on these plugs

[@Playtrack22]

Installed spark plug on a hot engine that alright to do it?

[@frankdux6930]

Yeah i prefer to do cold

[@bobbarker3248]

It can be dangerous for yourself. You don't gain anything from doing it on a hot engine.

[@KamalG9]

I guess he doesn’t want to wait 30 minutes

[@MattOlshove-fk7us]

Never use impact drill on spark plugs

[@NutzAboutBolts]

When did we used the impact drill on the spark plugs?

[@brandonblack2095]

no torque specs ?

[@NutzAboutBolts]

It’s in the description box

[@fishcatbunnypig]

He said 14 ft lb