So this time i let Nicole do most of the recording / planning on the video. Hope you all enjoyed it! We tried something different as well this time with the wooden laser-cut panels! It probably ain´t everyones cup of tea but we still hope it adds to the build! Thx for watching!
This case can actually fit 4090 as well. Notice the cutout at the front, u can extend the gpu into the front area which is covered by the front cover. Smart design by CM
ive got the max variant of the v1 case with an full custom loop, external Radiator and same hardware, was a struggle to get everything into the case but the temps are pretty decent
Only low profile ones will work. You just need to check the clearance to the GPU. (67mm). Thermalright has a few that fits the height beside other brands.
Thx a lot! Glad you liked the video! I had breaks of not building PC´s over the years.. But it never get´s old.. can only recommend. Even with hardware changes over the years. I started building in my teens around 30+ years ago.. and i can´t see me stopping it at some point.
Put the mobius fans on the Atmos. As good as the new sickleflow fans are, the mobious fans are just on a whole other level, they're basiclly noctuah fans with RGB. Anyways, sweet build!!! Love the vid!!
Hi Ronnie! The mobius fans are really excellent fans!!! Much better performance than the sickleflow´s ! Glad you like the vid/build!!! Hope to see you around again in future vids!
@TekTherapy Thank you. I'm currently in the process of building my 2nd 4090 in the V2 case, trying to downsize for my new room build. Would you recommend the the ML280 or Thermaltake GH280? Do either of them need lower profile vans?
@@inked-96 Nothing to be sorry about. The TH280 is solid as well, but i would prefer the ML280 imo better pump design. For spacing it would fit as well with the stock fans (tightly but would fit)
I presume you mean the 14900k? The main benefit would be the K Cpu´s are (usually) higher overclockers. But i wouldn´t recommend one at the moment since it´s not clear what the situation will be with the K´cpus. If you have been following the media. Thanks for the comment..
B760 motherboards support all 13/14th gen CPU´s even K. It´s in the end just about VRM´s available PCIe lanes and USB Ports availability between B/Z Boareds.
Small note: in the description, first line, you have "Mastet Cooler" instead of "Master Cooler", small typo :) Also a question, on the official webpage it says the bottom fans are limited to 15mm height, but in your video you install 2x sickleflow fans which are 25mm in height, am I missing something here?
Hey man! Thanks for letting me know, i just corrected the typo. Concerning the the fans, i actually used Mobius Fans (my bad) corrected the description (the link was correct). And i was able to fit them with 25mm height. But really just barely. Ideally you should use something around 15-20mm. Thanks for watching!
@@TekTherapy Thanks for the reply, I was considering the case and still somewhat am, but since AMD just announced a new chipset for AM5 I'll probably wait to see what the boards offer!
Sorry for the late reply, was attending Computex! If going with the nrw am5 cpus you'll get a better thermal performance across the board! Especially good with sff
Hi! Yes the parts are out of wood! I can surely recreate them easily still have the files! You can drop me an DM on insta or an email. Thx for watching
Hi Mark! With the 14900k we hit 85c on a 20min Cinebench run. GPU Speedway stress test around 69c. If you opt for a less power hungry CPU and paired with a 4070ti Super expect lower numbers. For gaming the CPU temps will be lower anyway as in the Cinebench stress test.
Hey! We generally don't really do benchmarks. But we are working on a different format to do separate short videos showing the temps of the builds. Thx for watching!
but.... Why would you use the hottest processor in the history of mankind for this tiny build ? T.T. I mean I like it but...an i7 would have been enough lol
Actually i do disagree with that. Because the Case is only 130 bucks depending on your Region. So even though the outer shell is like the max. You can still do a budget build with your own "cheaper" components for the base price of the V2! Thanks for watching
Hi man! Sorry for the late reply, i was attending computex. It has been tested on other channels in the same config and the difference between running this with 2x bottom fans at exhaust is like 2-3deg difference from what i saw. I want with the setup most of the channels used as well! Thanks for watching
Cooler master did good? Lol this is a step back in basically every way from the V1 other than the type C port. The V1 was very popular for one specific reason. Versatility, and the V2 doesn't have that.
Hi man! Thx for the but i have to disagree. The 14900k in gaming / normal work scenarios is nicely cooled with a 240/280mm. Only when you run heavy tasks like render/processing than i agree you will reach it´s limit. We done countless builds with 240´s on the 14900k. It isn´t a problem for "normal use". But i get your point
Hi Man! Sorry for the late reply. Totally missed it. I mean effectively the NR200P V2 is more or less a Max without the integrated components at a lower price imo.
Great build, id only go ryzen for a system like this from now on, with intels cpus dying on mass with1 3th and 14th gen and the massive heat and power draw they have, youd be a fool to not go for a zen4/5 cpu that costs less, draws less power, runs cooler and is more powerful.
Glad you like the build! At time of making this wasn´t a thing tbh. And since we focus on mostly doing visual builds we try to switch between CPU´s to not feature the same 3 Ryzen CPU´s we have all the time. But looking forward doing an Ryzen 9000 Build very very soon actually.
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
So this time i let Nicole do most of the recording / planning on the video. Hope you all enjoyed it! We tried something different as well this time with the wooden laser-cut panels! It probably ain´t everyones cup of tea but we still hope it adds to the build! Thx for watching!
The fact the 4080 Super fits inside here has sold me almost instantly
It snugs just right in..
This case can actually fit 4090 as well. Notice the cutout at the front, u can extend the gpu into the front area which is covered by the front cover. Smart design by CM
@@mesiaus Thanks for the comment man! You beat me to it 🙂
Great video! I have the Cooler Master NR200P MAX with an AMD 7700 and Nvidia 3090ti. I put two 120mm by 15mm fans on the bottom firing up. Runs great!
Cool setup you got! Sounds like a nice rig! Thx for watching and liking the video!
Nice video dude! Loved it. Build looks stunning, and that design!!! Wow!
Thank you!!
Awesome stuff. Just put the 280mm pure loop 2 fx in my nr200p. Loving it!
Cool stuff and cool AIO!
Relaxing and gorgeous to see, really like your video style a lot!
Glad you enjoy them!
That's what I call a clean looking build, great job there!
Thanks a lot man!
Love the cinematic touch at the end, clean build
Awesome! Glad you enjoyed the cinematics!
Cooler Master hoodies look so awesome!
Really enjoyed watching the video.
I'm also planning to try my first SFF build soon.👍👍
Thx a lot man! Glad you enjoyed the vid! The hoodies are really cool for sure!
Your content is top notch guys, please keep producing more videos!!
Thx Ronald! More videos are in the pipeline!
Awesome video guys, keep up the hard work
Thx Josh!!!! Glad you came by to watch it!
Thanks for the video, great detail, exactly why I subscribed to this channel.
Thx a lot man! Much appreciated
I really like this case, thanks for the build, stay awesome
Glad you like it!
That founders edition gyu's look so nice!! Envy!!!!!!
It does for sure ☺
Banger Build in a small case!
Thx a lot!
Great idea with the wooden parts! It's something different for sure!
Thx Victor!
Just bought this exact same build, doing backflips waiting for these parts.
Will surely turn out to be an epic build!
The front design was awesome!
Glad you like it!
This deserves more views and like!!!
Thx a lot ☺
Insane build and videography
Thx!!!!!
These 'no voice' videos are the best!!!
Thx a lot man!
ive got the max variant of the v1 case with an full custom loop, external Radiator and same hardware, was a struggle to get everything into the case but the temps are pretty decent
I can imagine doing a custom loop on the v1 (or v2) must have been a struggle! But with an external rad i expect really good temps!
The most satisfying as usual! Curious what the next video will be?!
I can say it'll be an ATX Black AMD Build
is it possible to apply same configuration with tower type cpu cooler instead of liquid cooler
Only low profile ones will work. You just need to check the clearance to the GPU. (67mm). Thermalright has a few that fits the height beside other brands.
Awesome video, the case looks decent
Thanks!!
SFF Builds are my fav!
Mine too imo!
Maan i wan't that case and nice you out 4080 to it 🔥 love it ❤
Awesome video! Love it!
Glad you like it!!
Great video, I wanted to change my case with a mini itx and your video helps me a lot.
Glad we could help out!
Work of art again🔥❤...you guys never disappoint us...❤☺️I wish You'll deserve more views for your work....
Oh man, thanks so much! And thanks again for all the support on all the vids we post! We do try to do our best!
Nice Video! Makes we want to build myself a PC once again after 25 years😂
Thx a lot! Glad you liked the video! I had breaks of not building PC´s over the years.. But it never get´s old.. can only recommend. Even with hardware changes over the years. I started building in my teens around 30+ years ago.. and i can´t see me stopping it at some point.
Damn that thermal compound applying was too funny
😅
What monitor are you using behind?
Hey! It´s an Lenovo 31,5" 1440p Monitor nothing fancy. We just use it for basic browsing / work. I´ll check for the model in a bit! Thx for watching!
So, what are you recommending for the older version if one's budget restricts the build to it being air cooled?
How about the C14s from Noctua! It works really well in the case
This video made me a subscriber....and yes, I'm getting this case!
Hi Mario! Thx sooo much! Will do the best to keep delivering content that you'll hopefully like! I really like the case to btw.
Is it possible to fit in a Arctic liquid freezer 2 or 3 AIO? 240 or 280?
It´ll fit the 240 and 280mm
Put the mobius fans on the Atmos. As good as the new sickleflow fans are, the mobious fans are just on a whole other level, they're basiclly noctuah fans with RGB. Anyways, sweet build!!! Love the vid!!
Hi Ronnie! The mobius fans are really excellent fans!!! Much better performance than the sickleflow´s ! Glad you like the vid/build!!! Hope to see you around again in future vids!
Those T-Force DDR5 Ram look dope imo!
Fully agree! Love the Deltas
how long did it take you to complete the build?
Around a day for the build including lasercut parts. But in total 3 days with editing / shooting etc.
Does the ML280 cooler master fit the new V2 case?
Yes it does!
@TekTherapy Thank you. I'm currently in the process of building my 2nd 4090 in the V2 case, trying to downsize for my new room build.
Would you recommend the the ML280 or
Thermaltake GH280?
Do either of them need lower profile vans?
@@inked-96 The ML280 will fit without slimmer/lower profile fans. The GH280 i actually don´t know maybe you meant the TH280?
@@TekTherapy sorry, I meant the TH.
@@inked-96 Nothing to be sorry about. The TH280 is solid as well, but i would prefer the ML280 imo better pump design. For spacing it would fit as well with the stock fans (tightly but would fit)
Really cool build! What other choices did you think about for cases (if any?)
If SFF take a look at the SSUPD cases as well had a good time building in the CH160 from Deepcool as well if looking for a super budget alternative.
Is there any benefit from the letter K processed on this board?
I presume you mean the 14900k? The main benefit would be the K Cpu´s are (usually) higher overclockers. But i wouldn´t recommend one at the moment since it´s not clear what the situation will be with the K´cpus. If you have been following the media.
Thanks for the comment..
What is the CPU, GPU & Room Temp in celsius when gaming? Thanks.
Hey! We generally don't do benchmarks. But we are working onba new format to integrate them in the future. Thx for watching!
I’ve done so many ITX build this case are my favourite still.
Thx a lot!!! I do really like the NR200P till this day! Thanks for watching!
Music choice is perfect, could you tell me the tracks you used?
Will add them soon to the description!
How hard was it to build in that NR200p case?
Pretty easy honestly! It is always a little bit tighter with cable management in an SFF Build though. But really easy to work on.
Great video man. Do you think a Phanteks T30 (30mm thick) would fit in the bottom? Thanks
Thx man! Will fit if using one T30 in the bottom. Because if using two like i did you will already hit the riser for the GPU at 25mm.
What type of fans have you used on the bottom?
Coolermaster Mobius ARGB 120mm
Please try 14600k with axp90-x53 and id cooling is-55
ATM. i sadly don´t have an 14600k around. But i do have an axp90-x53. I´ll look into it if get a 14600k maybe!
I’m just curious about to fit MSI AI1300p there. 😎
That MSI PSU won´t fit since the NR200p V2 only allows SFX Power supplies.
Can someone explain to me why it uses a B series motherboard with a processor that ends in K?
B760 motherboards support all 13/14th gen CPU´s even K. It´s in the end just about VRM´s available PCIe lanes and USB Ports availability between B/Z Boareds.
Very nice video! I have a question, have you tried with a 280 radiator on top of it ?
Thanks for liking the video! And yes it supports a 280mm rad
Finally! Thank you!
Thx man!
Great video. Please be sure to add the part picker list. Thanks! ❤️
I´ll set one up eventually! Thx for watching
Well we get a Corsair 4000D airflow any time soon? 😮
At the moment i sadly don´t have any connection to Corsair.. will see what i can get going in the future! Thx for watching!
Small note: in the description, first line, you have "Mastet Cooler" instead of "Master Cooler", small typo :)
Also a question, on the official webpage it says the bottom fans are limited to 15mm height, but in your video you install 2x sickleflow fans which are 25mm in height, am I missing something here?
Hey man! Thanks for letting me know, i just corrected the typo. Concerning the the fans, i actually used Mobius Fans (my bad) corrected the description (the link was correct). And i was able to fit them with 25mm height. But really just barely. Ideally you should use something around 15-20mm. Thanks for watching!
@@TekTherapy Thanks for the reply, I was considering the case and still somewhat am, but since AMD just announced a new chipset for AM5 I'll probably wait to see what the boards offer!
Sorry for the late reply, was attending Computex! If going with the nrw am5 cpus you'll get a better thermal performance across the board! Especially good with sff
It's a fascinating to me that they managed to put 1100 Watts of power in such a small PSU!
Yep it´s amazing now with the small SFX PSU´s for sure!
it's all incredibly beautiful and practical. but not worth a dime until I see temperatures at least in cyberpunk
Hey man! Thanks for the comment appreciate it! We are considering doing separate shorts with Benchmarks in future builds!
@@TekTherapy love to see it )
@@nickitaabitov1265 Thx a lot man!!!
Going to try this build but with the V2 nr200p and a 14th Gen i7 14700K and a 4070s
Awesome! Sounds like a cool build!
I only have a GTX 1650. Nice setup bro.
Thx Man!
Are this parts wood parts? And can you sell them?
Hi! Yes the parts are out of wood! I can surely recreate them easily still have the files! You can drop me an DM on insta or an email. Thx for watching
The design you did was different! Not my style but still really good!
Thx a lot! Glad you still enjoyed it!
Wow! RTX 4080 super
😀 🙌
Most people want the option to have an air cooler and a horizontal GPU. I’m glad I’ve got the V1, it seems like an upgrade atm.
Fair point!
Why didn't you choose a 280mm cooler?
Because we only had 240mm aio's supplied by Cooler Master back than.
Would like to have this as my workstation!
I actually thought to keep it as a system for myself this time 🙂
Try the jonsbo z20 case. cheap, beautiful, 20 liters...
Need to defo check out more jonsbo stuff in the future!
Flawless editing in my opinion, just feels goooood
Thx a lot!
How is the temp? Im planning to build using this case with Gigabyte RTX 4070 Ti Super
Hi Mark! With the 14900k we hit 85c on a 20min Cinebench run. GPU Speedway stress test around 69c. If you opt for a less power hungry CPU and paired with a 4070ti Super expect lower numbers. For gaming the CPU temps will be lower anyway as in the Cinebench stress test.
Bench? Temp?
Hey! We generally don't really do benchmarks. But we are working on a different format to do separate short videos showing the temps of the builds. Thx for watching!
This is basically NR200P MAX with added type c port, new front hole, and sold without PSU & AIO
But.. the Max comes with the PSU and AIO already. The V2 i guess gives you the option of building the parts you wan´t with at a lower price point.
I have almost exactly the same build in the NR200P Max
Great!!!
I'm building one soon with a 4080 rtx too!!!
Awesome!!! Good luck building your rig!
Hello underated. Earned A new sub
Appreciated
This is going to thermal throttle like crazy. A very hot running CPU, plus a small AIO and a very small case.
Never was intended as a practical build to be honest. It was intended as a show build for cooler master back than. Thanks for watching!
@@TekTherapy LMAO
but.... Why would you use the hottest processor in the history of mankind for this tiny build ? T.T. I mean I like it but...an i7 would have been enough lol
Easy.. because that´s the only one i had..
It really is just a refresh of the nr200p max, unfortunate that they left out the budget builders for this one
Actually i do disagree with that. Because the Case is only 130 bucks depending on your Region. So even though the outer shell is like the max. You can still do a budget build with your own "cheaper" components for the base price of the V2! Thanks for watching
You should build in a pink cabinet
We are actually thinking about it ☺
Brother, give it to me 😍😍😍
Not a fan of CM but that build came out great!
Thx for watching !
that wood front panel is really nice
Thx a lot man! Glad you like it!
I think its kinda oberkill to put a 4080 Super and 14900k into an 130$ case! But great videos as usual!
Fair point for sure.. we just thought it´ll fit let´s try it! Thanks for watching and the kind words!
what !? RTX 4080 with just 1 fan !
Hey! The 4000 Series Nvidia Founders Edition from has actually 2fans (1 on each side) Thanks for watching!
Just give me a drill and some metalworking tools, I'll get this rackmounted.
Hahahah...
This setup normally works better with all exhaust including bottom fans.
Hi man!
Sorry for the late reply, i was attending computex. It has been tested on other channels in the same config and the difference between running this with 2x bottom fans at exhaust is like 2-3deg difference from what i saw.
I want with the setup most of the channels used as well! Thanks for watching
Cooler master did good? Lol this is a step back in basically every way from the V1 other than the type C port. The V1 was very popular for one specific reason. Versatility, and the V2 doesn't have that.
Never owned the V1 so i have no comparision! But do appreciate the comment!
it is nice/cool but it is not enought a 240/280 aio for 14900,.....just saying
Hi man! Thx for the but i have to disagree. The 14900k in gaming / normal work scenarios is nicely cooled with a 240/280mm. Only when you run heavy tasks like render/processing than i agree you will reach it´s limit. We done countless builds with 240´s on the 14900k. It isn´t a problem for "normal use". But i get your point
This case is old news. Dan A3 >
Sadly.. i haven´t got any connection to Dan/LianLi atm.. so can´t really compare. Thanks for watching!
sadly the NR200P V2 is just a downgrade of the younger brothers before it, I don't see it selling very well.
Hi Man! Sorry for the late reply. Totally missed it. I mean effectively the NR200P V2 is more or less a Max without the integrated components at a lower price imo.
Video is kinda over produced
That´s what we call properly produced!
Great build, id only go ryzen for a system like this from now on, with intels cpus dying on mass with1 3th and 14th gen and the massive heat and power draw they have, youd be a fool to not go for a zen4/5 cpu that costs less, draws less power, runs cooler and is more powerful.
Glad you like the build! At time of making this wasn´t a thing tbh. And since we focus on mostly doing visual builds we try to switch between CPU´s to not feature the same 3 Ryzen CPU´s we have all the time. But looking forward doing an Ryzen 9000 Build very very soon actually.