Thank you for sharing this video. I’m actually building on this case. I noticed that your AIO fan does not collide with the power supply connector, especially since you have the power supply clip in the SFX-L position. My fan ended up breaking a blade, forcing me to lower its position to the SFX slot. My AIO is 280mm, but it has the same thickness as the CM240.
What a neat clean. Congratz buddy, just out of curiosity, why you didn't go for an NR200P Max? You wouldn't have had issues with the AIO I guess, no? And btw for those who are planning on building something on this case, do you think it is possible to add an extra fan in the bottom just below the GPU connection?
I didn't go with the max cause I already had a psu to use and I can re use the aio I went with in other videos. I should've filmed it, but I did try to add a fan under the gpu, but the fan was a hair too thick and it didn't fit. Could definitely use a slim fan though.
I have the first gen of that case and still using it, I like how it is compact enough to fit beside my table with my 32" 1440p monitor, I would say that it is not the best for airflow in my own opinion, we know that ITX cases has less airflow than a medium tower build, so I am switching into corsair 2000D and I can use a 360 rad beside it. I just like the idea of having a bit more fans inside the case.
Only vertical mounting for the GPU? Yikes, no thanks. Planning to move from a Lancool 216 & the NCASE M2 seems like the best fit for me. I like the SSUPD Xhuttle (since my computer is on the left side of my desk) but I think I'd like to downsize. AP201 and A3-MATX look like viable options as well. Going to be reusing my 4090 FE and upgrading my 5950X to a 9950X (or 9950X3D).
I was gonna sleep early for work but your video popped on my feed so I knew I had to watch to get a good night's rest.
Happy to be your sleep aid.
Thanks for including a parts list. I missed that on some of your other videos.
would be appreciated if u could show some thermals in future videos
Will do.
@ thank u boss
And also best fan configurations~ top exhaust, bottomed intake, side intake, etc etc.
Please provide the soundtrack name, it was damn ethereal, almost couldn't focus on the voice
Thank you for sharing this video. I’m actually building on this case. I noticed that your AIO fan does not collide with the power supply connector, especially since you have the power supply clip in the SFX-L position. My fan ended up breaking a blade, forcing me to lower its position to the SFX slot.
My AIO is 280mm, but it has the same thickness as the CM240.
ayeeeeee Another video! I switched my case again bud. I dropped the NV5. Went with the brand new Antec Flux Pro! Massive airflow
Right on. I miss my nv5
whats your room temp? can I use a 240mm cooler with a 9950x CPU in a hot Asian region?
I usually run my ambient at about 19c or 67f. Could use a 280 or a better aio with better fans than I did to get better cooling
@@Renegade_Rabryn our room temp in the summer season is 38c. what do you think its a good decision to get an ITX build?
I have the version 1 of the NR200 and the coating doesn’t show fingerprints at all. Is the version 2 that prone to fingerprints as you showed?
Yes very prone to it.
What a neat clean. Congratz buddy, just out of curiosity, why you didn't go for an NR200P Max? You wouldn't have had issues with the AIO I guess, no?
And btw for those who are planning on building something on this case, do you think it is possible to add an extra fan in the bottom just below the GPU connection?
I didn't go with the max cause I already had a psu to use and I can re use the aio I went with in other videos.
I should've filmed it, but I did try to add a fan under the gpu, but the fan was a hair too thick and it didn't fit. Could definitely use a slim fan though.
Will you try ASUS PRIME AP201 TG ?
Already have a video of it on my channel!
I have the first gen of that case and still using it, I like how it is compact enough to fit beside my table with my 32" 1440p monitor, I would say that it is not the best for airflow in my own opinion, we know that ITX cases has less airflow than a medium tower build, so I am switching into corsair 2000D and I can use a 360 rad beside it. I just like the idea of having a bit more fans inside the case.
I've got the 2000d and I'm excited to build in it.
@@Renegade_Rabryn I am looking at it right now and will buy it.
Only vertical mounting for the GPU? Yikes, no thanks. Planning to move from a Lancool 216 & the NCASE M2 seems like the best fit for me. I like the SSUPD Xhuttle (since my computer is on the left side of my desk) but I think I'd like to downsize. AP201 and A3-MATX look like viable options as well. Going to be reusing my 4090 FE and upgrading my 5950X to a 9950X (or 9950X3D).
The ncase m2 is awesome. That's what I use for my dedicated gaming system.
lil' bit of weird question from me.........
........will this case fill on backpack??
hahahah
curious and wanted one
Probably not.. but ill bet you it'll fit fine in a suit case.
@@HalfgayMan i see i see
thanks for confirmation
You know that tubes can run from the back of the case instead of of the front... This looks extremely janky
I wish people stopped using multiple ssd's with these boards.
More doesn't mean better with these.
Who says it's better to use multiple?
@@Renegade_Rabryn Why you wasting your components then?
Thanks for providing a parts list. I missed that on some of your other videos.