Electric Rebar Cutter Restoration
HTML-код
- Опубликовано: 6 дек 2021
- I found this device from a recycling shop in Japan for $50. The motor runs normally. But the piston isn't moved.
I hope you find this video useful and enjoy it!
Furthermore, I am happy to receive feedback, suggestions to improve myself.
!!! I'm sorry for the mistake if I did in this video !!!
Thank you very much for choosing to watch my video!
Have a nice day
Gear Show Хобби
Great job! A little tip, 15:07 pressing on the inside ring can damage the bearing. In this case press on the outside of the bearing :D
If you must press on the inner race of the bearing, put the old bearing on top and then use it to press the new one.
Согласен!
Bin einverstanden!
Thank you so much for this. Watching this, your harmonious work, is comparable to a long session of meditation. It sooths the ragged soul.
It is interesting to see a tool I know nothing about get restored. Thanks😀
very nice. interesting to see the rebar "cut" process. it shows where the strength is. great video.
The real mvp of restorations. Not like the vast majority of scammers who abound on RUclips, who falsify the states of things and then make restorations only with brush and paint.
Great job, thank you brother. You are so talented
I never seen such a tool like that before. Nice refurbishing for sure
@ 7:32 I like that bearing pull.... Very clean & nice... Well done Sir....
Great restoration and amazing work tool!
Another fantastic restoration. Thank you!
Two mistakes in this one. Don't press bearings from the inner race, that's how you ruin them, you might even have the bad luck to press them apart and don't use abrasives on the commutators, rather a clean file. Abrasives embed themselves in the soft copper and ruin it.
Perfect timing to upload the video and wonderful restoration
7:47 this device equals its Weight in gold 💯
늘 볼때마다 리스토어는 흥미롭군요.
And just like that it's like new 👍 great job. Really enjoyed watching.
Excellent work 👍👍👍 . Thanks for sharing
MAGISTRAL!!!! Y yo llevando la bordeadora de pasto al service para que la revisen!!!!!
Amazing device and great restoration! Thanks for sharing, that's been very informative!
I think this is your first electrefied pressure method tool that you're fixing. I don't think i have seen myself any of these even in real life. Has to be very specialized tool...
22:05 nice
You're doing great work.
Великолепная работа!
ขอบคุณสำหรับวิทยาทานนะครับ
Maravilha Gear Show! Gratidão
WOW! Great job!
Great job.
Nice work , thanks a lot for this great videos ,i like your meticulous job
Great work! Thank you very much for your wonderful videos!
But what systems are used in this machine to convert rotating force into shear cutting force?
Ottimo lavoro fratello, complimenti.
Fantástico 👏👏👏💯🇧🇷
Brilliant from UK
I waited a lot for the video.. It felt so good to be able to see your video today..
Muy buen trabajo
👍👍
I assume that the seal you repaired will function with the repair. I have no idea of the workings so I don't know myself. Hope it does! Looks pretty dang good!
Nice job 👍
Комментарий в поддержку канала и ролика, а также труда мастера.
wow awesome machine. great job
Nice job
Nice job! "Like" from me! Thanks for this video.
hello have a nice evening 🥰🥰
Dobra robota 👍. Pozdrowienia z Polski 🇵🇱
Is there anything you have taken apart that you couldn't get back together?
Gear show perfect restrasyon
I love how gear show does more with electronics than Mr. electricity
Wonderful work as always brother, I suggest you to make a restoration about Crown brand. Where I'm from it's very popular. Greetings from the Mediterranean.
I never seen such a tool like that before. Nice refurbishing for sure. And it would be great to have such a tool if you were building a foundation with rebar. Thumbs Up!
Good video
good job bro
عمل رائع 👍
Great work bro
Very good
Hello very good
Hi, I'd suggest du use a glass plate below your sanding paper so it's reasonable flat
Love from India gear bro😊💗
👍
mükemmel olmuş elinize sağlık
🇹🇭🇹🇭สุดยอดติดตามตลอด
В 2012-ом году работал на гильотине подобного плана, но маятникого хода - до 25 мм арматуру резали.
Güzel çalışma eline sağlık kardeşim
What were you spraying on the armature at the end of the video?
beatiful
Поржал с того, что он шнур помыл кинув его в воду) пускай гниёт себе)
Чёт еле еле работает. А так молодец 👍
Hi. It would be great if you could do this with a charger. I'm looking forward to. good work.
This is what mechanical surgery looks like. So satisfying
Do you take old tools to restore? I have a pair of drills that the battery don't work anymore but I don't want to throw them out, I would like to know if I could send them to you to make a good use of them.
Молодец 👍👍👍
If you made that one battery powered it would be the bicycle thief's greatest tool.
@10:16 I would have used JB weld. But other than that good 👍 Job 🙂
Imagine walking around with this thing all over site, carrying long extension cables
You actually use the fins on the anvil to put it in a vise and work at a work station, like where you're making the bends, wiring the quadrants and all that jazz.
Big fan Pakistan
👍👍👍😊
Satisfying sound in 3…2…1…0:43
💪👍😉
Should be great to see Sandblasting!!!!!!
Những chiếc roang đã bị nứt, hỏng nên thay cái mới, không nên dan keo khi vào máy làm việc nó lại nứt tiếp, vì không chịu được lực nữa OK
Any idea of the manufacturer?
I thought you will convert it to cordless
what is the name of the process at 13:30
Can u do a AC to DC with this?...
21:07 все развалилось на этом клее :)
ممتاز مرة أخرى متى الفيديو التالى
10:50 притирку на наждачной бумаге лучше проводить подложив Стекло,столешница всегда кривая завалишь края.
👍👏🖤
Modified Battery Adapter and DC12V
why hasn't there been a video for a long time
Hello evrybody
Why bother cleaning the bearings?
The Japanese learn to drive with the English and use electricity with the American. 😂😂
21:06 you brake the plate in superglue position , the glue isn't resist the impact force , but i hope it work nicely a long time
otherwise , great job bro...
Вы хотя бы узнали как правильно запрессовываются подшипники,если до этого момента были не в курсе.Смотреть больно на такое рукож....во.
Make it cordless
15:08 noooo😭😭😱 u will damage the bearing😭
Top 10 things I shouldn't put my wee wee in
👍🏻🇪🇨
26 seconds
upgrade to battery
한국사람?
more tahn better a n angle grinder