Just installed these on my 21 ORP. Quick note to anyone with radar cruise control: there are 2 10mm bolts that you need to remove to take off the bumper. I spent a few minutes trying to figure out why my bumper wouldn't come off and thought I was going to break it lol. Disconnect the radar and pop out the 2 clips holding the cables to the frame and you'll be good to go. Also, if you have LED fogs, you disconnect the single clip that's held in place with a white locking piece. I originally unplugged the cable connected to the driver side fog light, but that cable is secured to the frame. Both fog lights are connected to the big clip that's close to the fender liner.
@@HeadlightRevolutionin these instructions, there are already 2 10mm bolts in the middle of the front bumper. Where are the ones for the radar? I just got my 2023 runner last week and this is one of the first upgrades I’d like to do.
Nice headlights for the 4Rs that need them. I took ownership of a '22 TRD ORP and it has LED high AND lo with LED fog lamps. When I go to work at 530 in the morning the low LEDs burn bright and allow me to see everything. I'm almost embarrassed to think oncoming traffic is blinded when I have the lows on because it is so bright. When I turn on the high beams and on auto, forget about not seeing that buck in the ditch. When the highs are on in the country they turn off sometimes because the light reflecting off of the road signs reflects back to the sensor turning them off, but only very briefly and until the angle of reflection has changed. Both hi and low settings are extremely bright. I won't change them. I looked at the Morimoto sequential tail lights and they are very nice!
I didn’t think the stock ones were that bad but wow are these way better lol. The startup and the turn signal are a nice added feature. When we get our 4Runner, we’re upgrading to these!
Just got these along with the morimoto xb led fog lights and taillights. Totally transforms the 4Runner. I got the amber drl which is amazinggg and soo bright and makes it look so mean and aggressive
Morimoto Lights are amazing! Great quality, good look, and I get many compliments on them. Thank you HR for your videos and detail step by step installation tutorials, they are helpful and really great! Thank you!
Seeing this today and now Im torn between alpharex and this version 2 headlights. Dang. Not to mention morimoto is going to sell the matching tail lights in September which looks sooo awesome. Tough decision.
It is a touch decision, but honestly a no-brainer for us here! The Morimoto's are just brighter all around, and come with that amazing 5-year warranty! Not to mention that they also have matching fog lights to go with those headlights and taillights!🔥
Yes, as long as it turns on and off with the vehicle. Some fuses are hot fuses which means the lights will randomly turn on even when the engine is off.
I'm guessing they've fixed all of the defects in these now? I was SO PISSED when I bought the (I Assume) Gen 1's from you all last May and the perimeter edge DRL's failed within 3 days. Ultimately I returned them and went with your full set of SV.4's and they are fantastic.
good morning I want to resolve a question regarding the morimoto XB of my 4Runner The 3 lights are always on, but I see that they should only be 2 and (3 only in high light)
And now I want a 4runner just because of these headlights. Killer design! So what happens when let’s say on the the LED projectors fail? You can just “swap” a bunch can you? These look awesome tho!
Only my driver side sequential works. The passenger side just blinks normally, anyone know what the problem can be. I used the plug provided and connected it to the fuse box.
Where do you recommend plugging in the drl harness on a 2020 4runner? The injector fuse on the 2020 is in a different location and when plugged in won't allow you to cover the fuse cover.
You will want to throw that on an ignition on fuse, so that would be anything that comes on with the vehicle key turning on. I would recommend going with something like your dash lights, or the fuel pump fuse, bbut anything that comes on with that ignition will be good to tap into! If you have any more trouble with finding a fuse, shoot us an email and we will get you taken care of!
Great Video because it showed both the halogen vs Morimoto XB lux results. It would be great to see the same approach for the for F150. the halogen vs the SV4 and H11
If you look in the description of each of those videos, you will see that the Lux for the OEM headlights is included next to the Lux of the new bulbs! Let us know if you have any other questions, we are here to help! Thanks for the support, and have a great day!
on this new gen2 with white drl can I use the amber as a del at night time and white at day time? I'm guessing I need a bunch of relays to make it work
When are you going to release XB headlights for the 2010-2013 4runner?!! I have the XB headlights on my 2015 Tundra and I love them. I cannot find any company the makes aftermarket LED headlights for the 2010-2013 4runner. The only real possibility that I have found for my 4runner is doing a retrofit. I just want a quality made product that is not being assembled in a garage.... MORIMOTO NEEDS TO STEP IN AND SWOOP THE MARKET ON THE 2010-2013 4RUNNER!!! No one else has done it!
I am sorry to say that we do not have a deal for those as of right now. If you would like to shoot us an email and ask for Elliot from social media, I would be happy to field that email and see what we can work out for you!
@@HeadlightRevolution I believe they are asking about snow build-up here, LED's aren't known to output a lot of HEAT, causing snow build up on the lens of the headlight. Do these Lights produce any heat to them that will keep snow from building up on the lens of the Headlights?
Hi. Thinking of buying these. I already have those 3 LED raptor lights hooked up to the INJ fuse slot. Is there another fuse slot I can tap into? I have a 17 Pro if it matters.
If you're driving in inclement weather, you should ideally be using your fog lights to illuminate foreground lighting. That being said, a yellow fog light would be hugely beneficial during a snow storm.
LED bulbs in an aftermarket reflector or projector wouldn't even be worth the time testing, they'll never compare to a headlight made with specific parts such as an LED projector like the XBs have.
Can someone let me know if they ever get the 2021 sr5 premium harness or a light that can fit...theses are my favorite lights and a lot of 2021 owners are missing out...
Looking to get these, but I see reviews that claim the plastic used is cheaper quality than OEM and is prone to yellowing. Do these use a similar plastic to OEM?
This is not true at all with these headlights, with some of the cheaper headlights out there you might see that! These are OEM quality headlights, you will not have anything like that happening to them! Let us know if you have any other questions!
I did the install, the guide (step 9) does not reference swapping over the OEM brackets to the Morimoto's. Is this part optional or is it something that Headlight Revolution decided to do?
I forgot to swap mine. They still install and fit perfectly. Weather sealed.. No issues on my end. I think the brackets do ensure the bumper snaps back into place though.
You should use the bracket on the XB headlights as well. Reduces the vibration and stabilizes the headlight for long term durability. Don’t need any rattles from a subwoofer messing up the lights over time!
Yes they are different. They are smaller and in an awkward position. Because of this, if you managed to put it there, you wont be able to close the fuse box with the cover. I tried putting a raptor lights and intended to use the same fuse box. I ended up using the fuse box in the driver's side inside the truck.
The headlight housing is entirely LED, every light inside it is a build-in LED board! Let us know if you have any other questions, we are here to help!
I have a 2021 TRD Off Road Premium 4 runner coming in to the dealership within a month. The low beams are LED but I believe everything else is not. Is the Morimoto compatible with the 2021? Is it worth it or should I just change the bulbs? Thanks!
Glad that you could get that install done so quick! For the fuse, you can tap that into the fuse EFI #2 in the same fuse box as the first fuse. Let us know if you have any trouble with anything!
If you already put a fuse in there, or it came with a fuse, then you will want to replace the 10amp fuse that is not aligned directly with the fuse tap prongs with the stock fuse. I hope that makes sense, and if it doesnt you can email into us and we will be happy to send you a screenshot of what that looks like! Sales@HeadlightRevolution.com
We will see what we can do, the wiring should be the same except for the fuse tap and where you tap that harness into. Let us know if you have any other questions, we are here to help!
I live in Colorado, what is the typical install cost for these. I would not feel confortable pulling my bumper off and remembering where all the parts go back on. I could do it, but my toolbox is not equipped with some of the cool tools
I was about to ask the same thing. Did you get a response or figure something out? I’m also from Colorado . Trying to find a place that might do this type of work for me.
I’m someone who has never worked on cars before and I installed these in about 2 hours. I watched a few videos on removing the bumper before attempting it though. Best of luck
We have the full install guide here. www.headlightrevolution.com/core/media/media.nl?id=5795644&c=5129608&h=weL4PKjJJl7KWZkWmPjsC9TCeogrhf7UwahAAzUYYimzFbvY
You will have to make sure you have the Gen 2 version of that headlight, and thenit should just work when you power up the vehicle! I am not 100% sure on when you use the auto-start feature, as the factory headlight might do something different when you use that auto-start feature. Sorry I couldnt be of more help here, let us know if there is anything else we can do for you!
Just installed my gen 2 headlights and looks great. I’m having trouble with the passenger side headlight as the startup sequence and DTRL doesn’t turn on. HOWEVER the actual night time light works. Is this something to do with the fuse? I have a 2020 so it’s different.
That is so odd, I am so sorry to hear you are having this issue! I will now have you check the DRL connector, those pins can sometimes be crushed to the sides, so you will just have to straighten that pin and try again! Let us know what you come up with, and we will go from there!
@@HeadlightRevolution Thanks, I checked and the pins are fine. So I noticed in the DRL setting one DRL is on and it's as bright as it's supposed to be. Switch to night lights, and the both DRLs are on but slightly (noticeable) dimmer than the solo DRL. Btw I don't have automatic lights.
@@jessicabailey4708 Sorry I'm just now seeing this. A pin inside the black and yellow connector was bent (I believe on the cable that runs from the fuse box to the lights). Had to bend it back and it worked!
I've got the raptor grill lights installed in the 10A INJ fuse in the fuse box in the engine bay. Do you know if there's an alternate fuse I could install the morimoto lights in?
The XB LED Headlights fuse tap is just for the DRLs, so you could install this on any fuse that comes on with the ignition, such as gauge cluster lights, dash lights, or even engine fuses that come on with the ignition! Shoot us an email if you need any help with that! Sales@HeadlightRevolution.com
You are correct, and if you ever have a light go out in this headlight, you will just email us and we will get that covered under the 5-year warranty! If you have any other questions, shoot us an email and we will get you taken care of! Sales@HeadlightRevolution.com
@@HeadlightRevolution thx for the response. As long as someone is ok with that price/lifecycle I think these look great. I do wonder how many they could sell if they made it a true housing that could last the life of the vehicle.
Not sure on that honestly, youwould have to reach out to a shop to qute headligt install. They install the same as the OEM headlights and fog lights, so the shop book time would be the same for a regular headlight replacement!
You probably have them installed by now already. Next time in all honesty try to DYI your next project. There’s so much resources on RUclips and forums with plenty of community to help and support you various things that there’s no reason to pay someone to do it. You get that great feeling of accomplishment when you complete it yourself and you learn more of the in and outs of your own vehicle in the end. I pushed this on my wife in our early years which she initially hatEd, but now she appreciates the knowledge she’s gotten from it. Saved her a lot of money as well doing her own basic maintenance and not getting screwed over by a shop just cause she’s female and appears to be an “easy target”. We now work on our own cars and race to see who gets things done faster. I’ll admit she’s faster at changing the oil than I am nowadays 😭
@@ryuujiryuu9961 I did the install myself. Tail as turn conversion and all interior LEDs too. Delegating it to a shop wasn't about know how, it was about taking the time to do it. My time is worth something to me. Sometimes I would rather pay someone, while I get to spend that time doing other things besides turning a wrench.
Theyusually come pretty well pre-adjusted, but if you have to aim that that is super easy to do! They will have the same adjuster screws like the OEM headlights, and you can turn them to move the headlight beam up and down!
I am sorry to say that we can not exchange them as they are different in price. I wish we could do something about this! If you have any other questions just let us know!
I want them so bad lol. Just hate there’s no chrome in them, having a limited, I think these will look too dark on it. May have to just take the leap anyway.
They will look great with that vehicle, and in my opinion, blacked-out housings look better on all vehicles!🔥 Let us know if you have any other questions, or would like to get a pair on the way! Sales@HeadlightRevolution.com
Curious what the side projection looks like (corners near the vehicle). That’s the Achilles heel of every single aftermarket headlight I’ve seen so far. Alpharex Pros and Luxxes do a little better (still haven’t seen anything about the Novas). But so far, it’s an issue that these companies haven’t dealt with yet. As for the new xBs, we can only hope they’re better in all respects than the Gen 1. People were having failures with those left, right, and center
Headlight Revolution ??? If I try buying online it doesn’t give an option to pickup in store. But there’s a sign on your door that says online pickup only.
I bought the 1st gen. Massive shake on on bulbes and the drl lost 1 diode with the first week. I just lost another one yesterday on the driver side. Their quality control is bad. Now I see this version 2. My God its infuriating because these were so expensive.
That shouldn't be an issue at all! Any warranties will be directed to the new version of that headlight, so you can reach out to us with your order number to get those headlights replaced! Sales@HeadlightRevolution.com
Just installed these on my 21 ORP. Quick note to anyone with radar cruise control: there are 2 10mm bolts that you need to remove to take off the bumper. I spent a few minutes trying to figure out why my bumper wouldn't come off and thought I was going to break it lol. Disconnect the radar and pop out the 2 clips holding the cables to the frame and you'll be good to go. Also, if you have LED fogs, you disconnect the single clip that's held in place with a white locking piece. I originally unplugged the cable connected to the driver side fog light, but that cable is secured to the frame. Both fog lights are connected to the big clip that's close to the fender liner.
Good notes, thank you!
@@HeadlightRevolutionin these instructions, there are already 2 10mm bolts in the middle of the front bumper. Where are the ones for the radar? I just got my 2023 runner last week and this is one of the first upgrades I’d like to do.
I dont even own a 4runner but still watched this video, love the miromoto design.
May be the best install video I’ve seen. So clear and precise on what to do. Definitely getting a 4runner now after seeing this.
Awesome, thank you!
Update. 2022 lunar rock TRD ORP acquired.
Nice headlights for the 4Rs that need them. I took ownership of a '22 TRD ORP and it has LED high AND lo with LED fog lamps. When I go to work at 530 in the morning the low LEDs burn bright and allow me to see everything. I'm almost embarrassed to think oncoming traffic is blinded when I have the lows on because it is so bright. When I turn on the high beams and on auto, forget about not seeing that buck in the ditch. When the highs are on in the country they turn off sometimes because the light reflecting off of the road signs reflects back to the sensor turning them off, but only very briefly and until the angle of reflection has changed. Both hi and low settings are extremely bright. I won't change them. I looked at the Morimoto sequential tail lights and they are very nice!
I didn’t think the stock ones were that bad but wow are these way better lol. The startup and the turn signal are a nice added feature. When we get our 4Runner, we’re upgrading to these!
It's a great upgrade!
That 4Runner is a beast and the headlights really finish off the front of the truck!
They really complete the build, love the look on those 4Runners 😍
Just got these along with the morimoto xb led fog lights and taillights. Totally transforms the 4Runner. I got the amber drl which is amazinggg and soo bright and makes it look so mean and aggressive
Morimoto Lights are amazing! Great quality, good look, and I get many compliments on them.
Thank you HR for your videos and detail step by step installation tutorials, they are helpful and really great!
Thank you!
Glad you like them!
Amazing, clear instructions. You have given me the confidence to buy and install these lights
💪💪💪
you made that install look so easy... no chance i could do that haha
side note for the 2020... there are 2 bolts that are part of the TSS system that need to come off... and the wiring for the TSS...
Perfect, thank you for letting us know! That is the kind of information we are looking for! Thanks for your help!
I just bought the previous generation XB head lights . Wish could exchange them
You could totally sell those on the internet, then purchase a pair of the new set!
Amir GH me too .... high beams are very bad
Seeing this today and now Im torn between alpharex and this version 2 headlights. Dang. Not to mention morimoto is going to sell the matching tail lights in September which looks sooo awesome. Tough decision.
It is a touch decision, but honestly a no-brainer for us here! The Morimoto's are just brighter all around, and come with that amazing 5-year warranty! Not to mention that they also have matching fog lights to go with those headlights and taillights!🔥
Can you test the alpharex nova? ... you are selling both. I want to pick the best. Thank you
I’ve heard alpharex are just Chinese crap like Alibaba quality but no personal experience. Just what I’ve heard.
I have marker lights tapped into the inj fuse... Can I use another 10amp fuse for these ?
Yes, as long as it turns on and off with the vehicle. Some fuses are hot fuses which means the lights will randomly turn on even when the engine is off.
I'm guessing they've fixed all of the defects in these now? I was SO PISSED when I bought the (I Assume) Gen 1's from you all last May and the perimeter edge DRL's failed within 3 days. Ultimately I returned them and went with your full set of SV.4's and they are fantastic.
Yes Morimoto has updated the housings. Sorry about the trouble you had with yours.
Will a plug and play one come that fits the 2021 model
Yes they are working on them!
good morning I want to resolve a question regarding the morimoto XB of my 4Runner
The 3 lights are always on, but I see that they should only be 2 and (3 only in high light)
email service@morimotoHID.com and they will be able to assist you.
I like these but wonder if you would compare them to the two light ones? I like the look of two projectors total per side.
How do I close my fuse box without messing up the wire?
And now I want a 4runner just because of these headlights. Killer design! So what happens when let’s say on the the LED projectors fail? You can just “swap” a bunch can you? These look awesome tho!
That's where your warranty would come in, we could swap out the whole unit for you!
Only my driver side sequential works. The passenger side just blinks normally, anyone know what the problem can be. I used the plug provided and connected it to the fuse box.
Shoot us an email, we can help! sales@headlightrevolution.com
Where do you recommend plugging in the drl harness on a 2020 4runner? The injector fuse on the 2020 is in a different location and when plugged in won't allow you to cover the fuse cover.
You will want to throw that on an ignition on fuse, so that would be anything that comes on with the vehicle key turning on. I would recommend going with something like your dash lights, or the fuel pump fuse, bbut anything that comes on with that ignition will be good to tap into! If you have any more trouble with finding a fuse, shoot us an email and we will get you taken care of!
Great Video because it showed both the halogen vs Morimoto XB lux results. It would be great to see the same approach for the for F150. the halogen vs the SV4 and H11
If you look in the description of each of those videos, you will see that the Lux for the OEM headlights is included next to the Lux of the new bulbs! Let us know if you have any other questions, we are here to help! Thanks for the support, and have a great day!
For the drl has a ground cable?
good morning, can you please compare alpharex headlights and morimoto headlights
We can definitely suggest it to our video team!
@@HeadlightRevolution thanks a lot
How does this work with a 2021-2022 4runner TRD pro? Is this a plug and play? I have a raptor light running on inj,
Do they fit a 2021 4Runner?
the wiring in the 2021 4runner is different stay tuned .
Ive had mine for a year already but don’t know to get the startup sequence going ?
The headlights have to be on Auto and the fusetap installed for the DRL!
Those Blue TE37's look rad. Can you show us a side shot of the output? Mainly the frontal area on.
Those TEs do look amazing on that truck😍 Hopefully will have more shots in the future!
How did you turn your front bumper to color black?
Will a Gen 2 Morimoto XB Headlight or similar, come out for 2010-2013 4Runner?
It's not something we've heard of. I don't think that will be happening!
on this new gen2 with white drl can I use the amber as a del at night time and white at day time? I'm guessing I need a bunch of relays to make it work
You cannot switch between white and amber for DRL.
When are you going to release XB headlights for the 2010-2013 4runner?!! I have the XB headlights on my 2015 Tundra and I love them. I cannot find any company the makes aftermarket LED headlights for the 2010-2013 4runner. The only real possibility that I have found for my 4runner is doing a retrofit. I just want a quality made product that is not being assembled in a garage.... MORIMOTO NEEDS TO STEP IN AND SWOOP THE MARKET ON THE 2010-2013 4RUNNER!!! No one else has done it!
We do not make thoes headlights, but hopefully Morimoto will get them going down the road for you! We will keep you posted of course, have a good one!
Hey I don’t have the “INJ” fuse in my panel. Above the 7.5A is a 15A STRG LOCK fuse any advice ?
Please reach out!
218-755-5200
Sales@HeadlightRevolution.com
Is there gonna be a deal for headlight and tail light ?
I am sorry to say that we do not have a deal for those as of right now. If you would like to shoot us an email and ask for Elliot from social media, I would be happy to field that email and see what we can work out for you!
What about the snow? How will they perform when it’s a snowing?
These bad boys will perform amazing in the snow! That light will cut right through and illuminate the road perfectly!
@@HeadlightRevolution I believe they are asking about snow build-up here, LED's aren't known to output a lot of HEAT, causing snow build up on the lens of the headlight.
Do these Lights produce any heat to them that will keep snow from building up on the lens of the Headlights?
Hi. Thinking of buying these. I already have those 3 LED raptor lights hooked up to the INJ fuse slot. Is there another fuse slot I can tap into? I have a 17 Pro if it matters.
You can use any fuse slot that has power when the ignition is in the on position.
how about driving in a snow storm? problem with too white is you get blinded.
If you're driving in inclement weather, you should ideally be using your fog lights to illuminate foreground lighting. That being said, a yellow fog light would be hugely beneficial during a snow storm.
@@HeadlightRevolution can't really shut the headlights off... too white output even with low beams can make it difficult to see
What about stock headlights with after market LED bulbs? How do they compare?
LED bulbs in an aftermarket reflector or projector wouldn't even be worth the time testing, they'll never compare to a headlight made with specific parts such as an LED projector like the XBs have.
I’m still waiting a updated one for my 2021 model
Already out it’s a $100 kit
@@Squats4Thots I don’t see it on their website
Thanks I see it now on the this guys page...I was checking their official website 😂
@@Squats4Thots it was only for the trd pro and the limited models
This will be coming out soon!
Can someone let me know if they ever get the 2021 sr5 premium harness or a light that can fit...theses are my favorite lights and a lot of 2021 owners are missing out...
I have a 2016 SR5 premium. Will they work for mine?
@@ethxn2159 yes
Looking to get these, but I see reviews that claim the plastic used is cheaper quality than OEM and is prone to yellowing. Do these use a similar plastic to OEM?
This is not true at all with these headlights, with some of the cheaper headlights out there you might see that! These are OEM quality headlights, you will not have anything like that happening to them! Let us know if you have any other questions!
I did the install, the guide (step 9) does not reference swapping over the OEM brackets to the Morimoto's. Is this part optional or is it something that Headlight Revolution decided to do?
I forgot to swap mine. They still install and fit perfectly. Weather sealed.. No issues on my end. I think the brackets do ensure the bumper snaps back into place though.
You should use the bracket on the XB headlights as well. Reduces the vibration and stabilizes the headlight for long term durability. Don’t need any rattles from a subwoofer messing up the lights over time!
Did they ever measure the lux of the V1 headlights? Trying to compare the v2 to the v1 but cannot seem to find a lux measurement for the v1's
Not at this time, sorry!
Did I miss the part on how to adjust the lights so it projects evenly? Thanks!
Super easy with the adjustment screw in the back!
I've heard the fuse locations on the 2020 4Runner are different. Is this true? Also is it easy to disconnect the TSS sensor and do this?
The fuse should go to the same location, so you should be good to go with following the install video!
Yes they are different. They are smaller and in an awkward position. Because of this, if you managed to put it there, you wont be able to close the fuse box with the cover. I tried putting a raptor lights and intended to use the same fuse box. I ended up using the fuse box in the driver's side inside the truck.
We need u guys in Kalamazoo mi
I wish we could, unfortunately cant be everywhere at once😄
Are the low beams led?
The headlight housing is entirely LED, every light inside it is a build-in LED board! Let us know if you have any other questions, we are here to help!
I have a 2021 TRD Off Road Premium 4 runner coming in to the dealership within a month. The low beams are LED but I believe everything else is not. Is the Morimoto compatible with the 2021? Is it worth it or should I just change the bulbs? Thanks!
Just ordered mines for my 2021 sr5 premium xp package
Y’all do installations?
We do not sorry.
I upgraded all my lights to LED..55w Hid low beam from GTR..which is brighter?..Las fit on my turn signals..
Although the HIDs will be very bright, these XB LED housings will get you more usable light output with those projectors!
Does it fit 2021 4runner ??? And can the individual light bulb be changed if they burn out ?
Only certain models at this time! There are no bulbs that can be replaced!
I just got mine!!! Installed it in
Glad that you could get that install done so quick! For the fuse, you can tap that into the fuse EFI #2 in the same fuse box as the first fuse. Let us know if you have any trouble with anything!
Headlight Revolution on my diagram it’s a 7.5 amp in the EFI No.2 is that ok?
That will be ok to use for sure! Just make sure to use that same 7.5 amp fuse in the fuse tap open slot as well!
Headlight Revolution I don’t have a fuse tap open slot...the fuse tap came with 2 10amp fuses already in the fuse tap
If you already put a fuse in there, or it came with a fuse, then you will want to replace the 10amp fuse that is not aligned directly with the fuse tap prongs with the stock fuse. I hope that makes sense, and if it doesnt you can email into us and we will be happy to send you a screenshot of what that looks like!
Sales@HeadlightRevolution.com
Do they work on the 4 runner 2022 trd pro ? And do I need any special harnesses for it?
Reach out to our CS team to go over what we have for this!
218-755-5200
Sales@HeadlightRevolution.com
When will you do something for 2010-2013 4runners? :( We are forgotten...
We do not make any headlights, but if we hear anything about lights for that vehicle from Morimoto we will let you know!
Do you hook to a battery terminal at all with these lights?
No need with these!
morimoto needs to make gen 2 for the tundra.
any chance of doing a follow up video with the 2020 wire up?
We will see what we can do, the wiring should be the same except for the fuse tap and where you tap that harness into. Let us know if you have any other questions, we are here to help!
@@HeadlightRevolution just bought these gen 2s. Which fuse would I be tapping into for a 2020?
How do you get the sequence to work?
Reach out to our CS team so we can help you with this!
218-755-5200
Sales@HeadlightRevolution.com
Can u do a video Avensis 2010 headlight ?
Sorry to say that we don't have that one yet😔 If there is enough demand for that product we will definitely look into that!
How do you adjust these horizontally?
There is a screw towards the inside edge of the headlight on the bottom, this would be your horizontal adjustment!
I live in Colorado, what is the typical install cost for these. I would not feel confortable pulling my bumper off and remembering where all the parts go back on. I could do it, but my toolbox is not equipped with some of the cool tools
I was about to ask the same thing. Did you get a response or figure something out? I’m also from Colorado . Trying to find a place that might do this type of work for me.
I’m someone who has never worked on cars before and I installed these in about 2 hours. I watched a few videos on removing the bumper before attempting it though. Best of luck
@headligihtrevolution dealers still have access to the previous generation? Ordering through a dealer and not sure which generation I'll be getting.
If they still have the previous version, they are still able to sell that one. If you order through us, we will be shipping only the new version!
Does it solve the drl flicker? I’ve had three sets now and each pair have all flickered
That should have been resolved a while ago, so reach out to our sales team and they should be able to get that resolved! Sales@HeadlightRevolution.com
What number is the yellow fuse?
We have the full install guide here.
www.headlightrevolution.com/core/media/media.nl?id=5795644&c=5129608&h=weL4PKjJJl7KWZkWmPjsC9TCeogrhf7UwahAAzUYYimzFbvY
How do I make that sequence happen when I start my car if the key is remote?
You will have to make sure you have the Gen 2 version of that headlight, and thenit should just work when you power up the vehicle! I am not 100% sure on when you use the auto-start feature, as the factory headlight might do something different when you use that auto-start feature. Sorry I couldnt be of more help here, let us know if there is anything else we can do for you!
Just installed my gen 2 headlights and looks great. I’m having trouble with the passenger side headlight as the startup sequence and DTRL doesn’t turn on. HOWEVER the actual night time light works. Is this something to do with the fuse? I have a 2020 so it’s different.
That is so odd, I am so sorry to hear you are having this issue! I will now have you check the DRL connector, those pins can sometimes be crushed to the sides, so you will just have to straighten that pin and try again! Let us know what you come up with, and we will go from there!
@@HeadlightRevolution Thanks, I checked and the pins are fine. So I noticed in the DRL setting one DRL is on and it's as bright as it's supposed to be. Switch to night lights, and the both DRLs are on but slightly (noticeable) dimmer than the solo DRL. Btw I don't have automatic lights.
@@HeadlightRevolution Fixed it. That was the issue, thank you! Looks awesome
Joseph Pina what did you actually do to fix it? I’m having the same problem. Thanks!
@@jessicabailey4708 Sorry I'm just now seeing this. A pin inside the black and yellow connector was bent (I believe on the cable that runs from the fuse box to the lights). Had to bend it back and it worked!
I've got the raptor grill lights installed in the 10A INJ fuse in the fuse box in the engine bay. Do you know if there's an alternate fuse I could install the morimoto lights in?
The XB LED Headlights fuse tap is just for the DRLs, so you could install this on any fuse that comes on with the ignition, such as gauge cluster lights, dash lights, or even engine fuses that come on with the ignition! Shoot us an email if you need any help with that! Sales@HeadlightRevolution.com
@@HeadlightRevolution Im having a similar delima. Can you guys suggest a specific alternate fuse slot to tap into. 2017 4runner.
Is there a option to buy these smoked?
There isn't, this would reduce light output and that's the main point of these!
Looks like the LED bulbs are still not replaceable? Crazy. Who wants to replace the entire housing when a bulb goes out?
You are correct, and if you ever have a light go out in this headlight, you will just email us and we will get that covered under the 5-year warranty! If you have any other questions, shoot us an email and we will get you taken care of! Sales@HeadlightRevolution.com
@@HeadlightRevolution thx for the response. As long as someone is ok with that price/lifecycle I think these look great. I do wonder how many they could sell if they made it a true housing that could last the life of the vehicle.
What kind of install time would it take a shop to do these headlights as well as the Morimoto fog lights?
Not sure on that honestly, youwould have to reach out to a shop to qute headligt install. They install the same as the OEM headlights and fog lights, so the shop book time would be the same for a regular headlight replacement!
@@HeadlightRevolution I was thinking the same. Thanks for the response.
You probably have them installed by now already. Next time in all honesty try to DYI your next project. There’s so much resources on RUclips and forums with plenty of community to help and support you various things that there’s no reason to pay someone to do it. You get that great feeling of accomplishment when you complete it yourself and you learn more of the in and outs of your own vehicle in the end. I pushed this on my wife in our early years which she initially hatEd, but now she appreciates the knowledge she’s gotten from it. Saved her a lot of money as well doing her own basic maintenance and not getting screwed over by a shop just cause she’s female and appears to be an “easy target”. We now work on our own cars and race to see who gets things done faster. I’ll admit she’s faster at changing the oil than I am nowadays 😭
@@ryuujiryuu9961 I did the install myself. Tail as turn conversion and all interior LEDs too. Delegating it to a shop wasn't about know how, it was about taking the time to do it. My time is worth something to me. Sometimes I would rather pay someone, while I get to spend that time doing other things besides turning a wrench.
Do you have to aim them at all?
Theyusually come pretty well pre-adjusted, but if you have to aim that that is super easy to do! They will have the same adjuster screws like the OEM headlights, and you can turn them to move the headlight beam up and down!
Omg I just installed XB first generation wish I could have get this 2 can I exchange pls ..???
I am sorry to say that we can not exchange them as they are different in price. I wish we could do something about this! If you have any other questions just let us know!
@@HeadlightRevolution Can I pay the differents I paid 1225 for it 2nd is a=same price!
I want them so bad lol. Just hate there’s no chrome in them, having a limited, I think these will look too dark on it. May have to just take the leap anyway.
They will look great with that vehicle, and in my opinion, blacked-out housings look better on all vehicles!🔥 Let us know if you have any other questions, or would like to get a pair on the way! Sales@HeadlightRevolution.com
Headlight Revolution thanks! Will do. Probably wait until a coupon pops up 🤣
Might have something come this Black Friday, we will keep you posted! 💯
8:45 - is that going to hurt the harness at all? Or should the cover be notched?
The website you linked, is it the Gen 2? or the Gen 1 XB headlights? It doesn't say it anywhere I'm just curious before I buy the gen 1 by accident
Any new orders will be shipping the Gen 2 version of those headlights!
@@HeadlightRevolution ayyyy 🍻🍻🍻 that's awesome
Glad that I could get you taken care of! You won't be disappointed with those new headlights💯
headlights for ford ranger also please :)
We actually have those ones in the works, and they will be ready for pre-order this September! 🙌🙌🙌
I know you ain't using an impact wrench for this project, lol.
bruh where da headlight adjustment section
We have another video on this.
Curious what the side projection looks like (corners near the vehicle). That’s the Achilles heel of every single aftermarket headlight I’ve seen so far. Alpharex Pros and Luxxes do a little better (still haven’t seen anything about the Novas). But so far, it’s an issue that these companies haven’t dealt with yet. As for the new xBs, we can only hope they’re better in all respects than the Gen 1. People were having failures with those left, right, and center
That would be a good test, we will see what we can get going!
I wish you made similar lights for my 1998 Grand Cherokee.
I'm sure we have something that could work, reach out to us!
218-755-5200
Sales@HeadlightRevolution.com
where are you guys from?
We are located in Atlanta GA!
Headlight Revolution I was driving by earlier today and saw a sign on the front door that says online orders only? Can I buy one in the store?
Headlight Revolution ??? If I try buying online it doesn’t give an option to pickup in store. But there’s a sign on your door that says online pickup only.
What is the part number for these new lights?
That will have the same part number, we sold out of the version one headlights, and all orders will be for the version 2!👍
$1325?! 😳
👀
I bought the 1st gen. Massive shake on on bulbes and the drl lost 1 diode with the first week. I just lost another one yesterday on the driver side. Their quality control is bad. Now I see this version 2. My God its infuriating because these were so expensive.
That shouldn't be an issue at all!
Any warranties will be directed to the new version of that headlight, so you can reach out to us with your order number to get those headlights replaced! Sales@HeadlightRevolution.com
Headlight Revolution it’s not as simple as that when you live outside of the us and you start reading this type of comments ...
ჩემი ოცნებაა ეს მანქანა ☝️❤️❤️🙏🇬🇪