Very very nice head lights!!! Would be nice if they made those very same one's for my 2012 4RUNNER LIMITED SR5!!! They look like something you would see on the new 6 Gen 4RUNNER that's coming out very soon!!! Great video!!! 👌👌👌
@@adamtakeshita8698 oh, I forgot…my raptor lights were actually hooked into the fuse box in the cabin near dead pedal. So the inj fuse was still open in engine bay. There’s a few slots between the two fuse boxes, don’t be afraid to make use of both!
Yea that’s what I’m trying to figure out did the same to the raptor lights I had to tap into the gtr drl wire for them to turn on all together how would it work to add those fangs too if inj fuse is already in use
You can tap it into that same fuse or just see which fuse has constant power with the engine on. I can't remember the fuse box to all the trucks lol. Sorry
Not as visible in this video. Everyone around me has the morimoto or alpherex, so the only way to stand OUT is these GTR Carbides or stick with stock 😂
Hate to burst everyones bubble but those headlights are total garbage in terms of actual output... Dont believe me? Just watch the Lightwerkz Global video comparing these to OEM, Alpharex NOVA (also trash) and the Morimoto. Theyre really... really bad.
They’re not bad, and they are slightly lower than the stock 2021+ LED low beam. The problem with the morimoto is there low beam output, as you have to aim them lower than stock as they are too bright. One of the local guys got a ticket after a cop pulled him over while he was driving behind me. He had to take his vehicle to be reviewed and he was made to remove them. Legally here, we’re not allowed to change any of the lighting from stock, so going brighter will put you at risk of being noticed.
lol you really hit the nail on the head, the morimotos are just ugly and have mostly shit styling and eeeeeeeeeeeeeeeeevery one has the same shit. I could not tell you how many youtube video of people showing their rig and its just the same thing. Also the sequential stuff is just tacky man....its like they were too focused on if they could, they never asked if they should. What would really be nice is for someone to go way way outside the standard box.
Dude that is the best if not the 2nd or 3rd best 4RUNNER I've ever seen. 😍
Very very nice head lights!!! Would be nice if they made those very same one's for my 2012 4RUNNER LIMITED SR5!!! They look like something you would see on the new 6 Gen 4RUNNER that's coming out very soon!!! Great video!!! 👌👌👌
Loving the blings.... and easily seen while driving, specially for a dark colored vehicle.
How do you have the headlight and fang light to the same INJ fuse slot??
Can you make a video or explain how to connect both fuses to INJ fuse…
I'm in Denver, just received these lights. Do you guys install? And how much? Also, are you guys really backed up? Let me know! Thanks!
I have raptor marker lights going to my inj fuse. So can I put these on another 10 amp ?
What you mean “flatten” the pin? You mean bend it out?
where did you add the raptor lights, fog, and drl in the fuse box? the video didnt really show it. it would be great if you can help explain
Have the same setup and love the lights, my only issue is that my raptor lights were in the INJ fuse. How did you get both to run?
i just ordered these and realized I will have the same issue lol. what did you come up with? add a add a fuse maybe? lol or just tap wires?
@@andrewjarvis7777 Did you ever solve this? Struggling with that issue now
@@adamtakeshita8698 oh, I forgot…my raptor lights were actually hooked into the fuse box in the cabin near dead pedal. So the inj fuse was still open in engine bay. There’s a few slots between the two fuse boxes, don’t be afraid to make use of both!
Very Niceeee. Too bad not for 4th gen 4runner. Great build.... got to think outside the box....which you all did very well..
Is there any way to make the DRL’s on the headlight a constant amber?
I think you just have to flip the wires around to get it amber
ah yes another poser with amber lighting
@@Parzzyval WTF does that even mean?
@@Parzzyvalyou’re just mad because you can’t afford the headlights
How good are you guys at alignments on SPC UCA? Local guy with fox 2.5 DSC incoming
If the headlight fuse is on the INJ, where is the Basel fuse and the front grill fuse connected to in your fuse box? Thanks in advance 🙏
did he reply, need to find out too
What were the headlights he was previously running?
You have my exact set up as far as lights!
How did you hook up both the wire from fang lights and gtr headlights to the INJ fuse slot? Sorry I’m a beginner but like for my rig to look nice too.
Yea that’s what I’m trying to figure out did the same to the raptor lights I had to tap into the gtr drl wire for them to turn on all together how would it work to add those fangs too if inj fuse is already in use
@@adrianortiz3835 following this…
Where can I find the light on top of the Fog light?
Do you have drl function?
LOL on the script for the video. You need to be charging for this comedy..
This guy talking kinda reminds me of Keanu Reeves with his chill voice
I have the alphaRex nova g2 but I don’t see the yellow wire for my fangs on the drivers side. Would it be the blue wire?
Hmm. I would ask Alpharex to make sure.
I’m already using a INJ for my raptor lights.. is there another fuse I can use to piggy ride the fang lights besides INJ?
You can tap it into that same fuse or just see which fuse has constant power with the engine on. I can't remember the fuse box to all the trucks lol. Sorry
@@Runnin4Tacos I can tap on add-a-fuse to another add-a-fuse?
@@Jon.pascual No, Tap the power wire from the fangs to the add-a-fuse.
They said on website only up to 2020. Will these work on a new 2022 4Runner ?
From our experience, it works with 2021 as well with a harness from GTR lighting. I am not sure if the wiring is different on the 22 models.
Only problem is defeating the DRL for the LED high beam. Still trying to figure that out for my 2022 TRD Off Road
Which fog lights are those?
How do I connect the headlights DRL and the Fog light DRL to the same INJ fuse ?
You can simply piggyback the Fog DRL to the headlight Add-a-fuse.
Can you make a video on how to aim the headlights for these gtr carbides thanks
I install these headlights today on my 2022 4runner and now I have problem on my passenger headlight.. low and high beam don’t work please help??
Any updates on this??
did you ever solve the issue? im having the same problem
Huge Mistake!!! Never Use a T-tap that will fail soon especially in salt areas !!
The morimotos's look better. Have them on my TRD OFF ROAD. I dont like the chrome around the lights. Prefer all blacked out.
Not as visible in this video. Everyone around me has the morimoto or alpherex, so the only way to stand OUT is these GTR Carbides or stick with stock 😂
Hate to burst everyones bubble but those headlights are total garbage in terms of actual output...
Dont believe me? Just watch the Lightwerkz Global video comparing these to OEM, Alpharex NOVA (also trash) and the Morimoto. Theyre really... really bad.
Barely produced 158 Lux = completely worthless
ruclips.net/video/kItoEHPgn98/видео.html
ruclips.net/video/kItoEHPgn98/видео.html
I watched that same video and they werent that bad.
They’re not bad, and they are slightly lower than the stock 2021+ LED low beam. The problem with the morimoto is there low beam output, as you have to aim them lower than stock as they are too bright. One of the local guys got a ticket after a cop pulled him over while he was driving behind me. He had to take his vehicle to be reviewed and he was made to remove them. Legally here, we’re not allowed to change any of the lighting from stock, so going brighter will put you at risk of being noticed.
lol you really hit the nail on the head, the morimotos are just ugly and have mostly shit styling and eeeeeeeeeeeeeeeeevery one has the same shit. I could not tell you how many youtube video of people showing their rig and its just the same thing. Also the sequential stuff is just tacky man....its like they were too focused on if they could, they never asked if they should. What would really be nice is for someone to go way way outside the standard box.
I like sequence. Depends on your taste.