Thank you for this extensive explanation. May I ask if it has held up? I have the same problem and I'm interesting in trying this before removing the heater box. Thanks.
@@josephe5146 Success! If you remove the stepper motor and rotate the axis manually and the temp changes randomly or doesn't change at all, its likely the cause.
@@hitsov I looked inside, it's definitely the blend door disconnected from the green/yellow shaft. Getting it set in the correct position before putting a screw or pin in place is going to be tricky, as you said in the video. I might end up just cutting a hole in the plastic.
Not the problem I’m having but a great fix on your part. Very creative.
Well done video! For those who need to tackle this job, you've given all the key tips needed.
Brilliant! Most probs are mid shaft and fixes are well documented. Thanx!!!
Thank you for this extensive explanation. May I ask if it has held up? I have the same problem and I'm interesting in trying this before removing the heater box. Thanks.
It's still working, no problems!
@@hitsov That’s good to hear, thank you. I’m going to try to go in with a borescope first to make sure this is actually the problem.
@@josephe5146 Success! If you remove the stepper motor and rotate the axis manually and the temp changes randomly or doesn't change at all, its likely the cause.
@@hitsov I looked inside, it's definitely the blend door disconnected from the green/yellow shaft. Getting it set in the correct position before putting a screw or pin in place is going to be tricky, as you said in the video. I might end up just cutting a hole in the plastic.
За достъп до този механизъм от шофьорската страна трябва ли да се разглоби таблото, предния панел и волана? Или повече се разглобява?