On your first target, The Tekkna program was discriminating it it out, the reason why it was not giving a TID number is because you have the iron ID off. If you go to the settings menu and turn on iron ID on, it will give you those low numbers in the foil range, Think of the iron ID setting as the discrimination ID.
Thanks Paystreak that’s great info! It was off.. I can’t remember whether gary mentioned to have the iron Id on or off? I think I ran mine off when they tried to get around the 07-09 problem when target id’s were being pulled down next to iron. Thanks again, great channel you have 😊👍
Great video the only thing I would say that Gary made the tekkna program for Roman infested sites so it’s not meant to be a deep program just to hit them romans and hammered coins with a high pitch in the iron. Best stick with your program for depth 👍
Thanks @steveningram, yes your right👍 I do touch on this in the video and say that I didnt expect Gary’s program to get a few of the targets as he’s using reactivity 3 but the one field is tricky so was interesting to see what his program could hear? Also interesting to see nonid’s we’re coming up below 42 where his disc is set at but I’ve had one of my best romans on a 36 so I would need use ears only for that one I think.. thanks for the comment
Another quality video, I enjoyed that. A nice mention of the corinium museum in Cirencester ( my home town ) I would love to try your settings if you care to share?
Thanks @Brendan-mw7jf, some amazing history in Cirencester and a lovely part of the country 😊 I’m not far away near the malvern hills. I will be doing a video on settings very soon but the CP9 program is based off program 3 sens ft Sensitivity 97/98 or to suit conditions Disc 6.8 Iron volume 5 Reactivity 1.5 Audio response 5 Pwm tones Silencer 1 or 0 if your feeling brave Bottle caps 0 Notch 0 Offset 13 Frequency max 40 I have used the same settings since the D2 came out and used general as a base program but since moving from 0.71 to 1.10 I found sens ft could handle these settings, before it was way too noisy. Good luck👍
Hi @mikesmith5638 The CP9 program is based off program 3 sens ft Full tones Sensitivity 97/98 or to suit conditions Disc 6.8 Iron volume 5 Reactivity 1.5 Audio response 5 Pwm tones Silencer 1 or 0 if your feeling brave Bottle caps 0 Notch 0, some fields the standard notch (26/27?) can settle the machine down Offset 13 Frequency max 40 Iron Id off I have used the same settings since the D2 was released and used general as a base program but since moving from 0.71 to 1.10 I found sens ft could handle these settings, before it was way too noisy. Good luck👍
Thanks @garyvaughan No problem Sensitivity 97/98 or to suit conditions Disc 6.8 Iron volume 5 Reactivity 1.5 Audio response 5 Pwm tones Silencer 1 or 0 if your feeling brave Bottle caps 0 notch 0 Offset 13 Frequency max 40 Good luck 👍
On your first target, The Tekkna program was discriminating it it out, the reason why it was not giving a TID number is because you have the iron ID off. If you go to the settings menu and turn on iron ID on, it will give you those low numbers in the foil range, Think of the iron ID setting as the discrimination ID.
Thanks Paystreak that’s great info! It was off.. I can’t remember whether gary mentioned to have the iron Id on or off? I think I ran mine off when they tried to get around the 07-09 problem when target id’s were being pulled down next to iron.
Thanks again, great channel you have 😊👍
Great video
Thanks @oldpelon was a good day..
Thank you. I'll try your settings tomorrow. I have the Manticore as well. Both are great machines.
Good luck👍 it can let some iron in around 72/82 but it doesn’t miss much. Both great machines
Great video the only thing I would say that Gary made the tekkna program for Roman infested sites so it’s not meant to be a deep program just to hit them romans and hammered coins with a high pitch in the iron. Best stick with your program for depth 👍
Thanks @steveningram, yes your right👍 I do touch on this in the video and say that I didnt expect Gary’s program to get a few of the targets as he’s using reactivity 3 but the one field is tricky so was interesting to see what his program could hear? Also interesting to see nonid’s we’re coming up below 42 where his disc is set at but I’ve had one of my best romans on a 36 so I would need use ears only for that one I think.. thanks for the comment
Another quality video, I enjoyed that. A nice mention of the corinium museum in Cirencester ( my home town ) I would love to try your settings if you care to share?
Thanks @Brendan-mw7jf, some amazing history in Cirencester and a lovely part of the country 😊 I’m not far away near the malvern hills.
I will be doing a video on settings very soon but the CP9 program is based off program 3 sens ft
Sensitivity 97/98 or to suit conditions
Disc 6.8
Iron volume 5
Reactivity 1.5
Audio response 5
Pwm tones
Silencer 1 or 0 if your feeling brave
Bottle caps 0 Notch 0
Offset 13
Frequency max 40
I have used the same settings since the D2 came out and used general as a base program but since moving from 0.71 to 1.10 I found sens ft could handle these settings, before it was way too noisy. Good luck👍
Отличный обзор брат, работает техно🤗👍🔥🤝🤝
Спасибо и спасибо за просмотр👍
Much appreciated pal top man 👍
No worries garyvaughan2756👍
If you don't mind me asking, what are the full settings your program uses?
Hi @mikesmith5638
The CP9 program is based off program 3 sens ft
Full tones
Sensitivity 97/98 or to suit conditions
Disc 6.8
Iron volume 5
Reactivity 1.5
Audio response 5
Pwm tones
Silencer 1 or 0 if your feeling brave
Bottle caps 0 Notch 0, some fields the standard notch (26/27?) can settle the machine down
Offset 13
Frequency max 40
Iron Id off
I have used the same settings since the D2 was released and used general as a base program but since moving from 0.71 to 1.10 I found sens ft could handle these settings, before it was way too noisy. Good luck👍
Thanks for vid.
Thanks ohiofredl👍
Très belle vidéo mais quel est votre programme que vous utilisez
Salut merci, c'est mon programme CP9 utilisant le programme 3. Je ferai bientôt une vidéo montrant les paramètres, bravo👍
@@DIRTBROSDETECTING j'ai hâte de voir ton programme effectivement il a l'air super intéressant
@@user-sc7ke3ul7f merci 😊
Great video your cp9 settings are quality any chance you can share them cheers
Thanks @garyvaughan
No problem
Sensitivity 97/98 or to suit conditions
Disc 6.8
Iron volume 5
Reactivity 1.5
Audio response 5
Pwm tones
Silencer 1 or 0 if your feeling brave
Bottle caps 0 notch 0
Offset 13
Frequency max 40
Good luck 👍
Base program? General… ft… deephc?
@@pb1545 f/tones
@@pb1545 Hi, base program was general on 0.71 but on 1.10 I’m using sens ft program 3. Hope that helps, cheers👍
Thank you. I'll try it tomorrow! Have a nice day.
💍💍💎💎💎💎💎❤❤❤
Thanks!
You need take a breather. Painful to listen to.
Thanks @jetsdad👍