Audi B9 S4 CTS Intake Removal/Installation (LOUDER + DRIVES)

Поделиться
HTML-код
  • Опубликовано: 24 мар 2022
  • Hi guys, there are some people who say intake install is just for chuuchuu noises, I definitely disagree. Not only does it add life to my car; I felt more power instantly (along with my intercooler + stage 1); if you want to get the most out of your tune. I recommend upgrading your intercooler and intake (makes a whole world of difference).
    ____________________________________________________________
    Link to product:
    www.urotuning.com/products/ct...
  • Авто/МотоАвто/Мото

Комментарии • 45

  • @KidWitDaM
    @KidWitDaM 4 месяца назад

    Great video

  • @p.drizzle8245
    @p.drizzle8245 2 года назад +5

    Those blow off valve sounds sound AMAZING. Nice vid, are you going to do an exhaust next? Shout out to Kory and the wagon 😎

  • @12tribes61
    @12tribes61 11 дней назад

    Does engine management light come on after this?

  • @12tribes61
    @12tribes61 11 дней назад

    Does this have 034 ecu and gearbox tune?

  • @ThesGt
    @ThesGt 2 года назад +1

    anyreason why you went with CTS Intake and not IE intake? since you already running on IE stage 1

  • @Thatblue.s4
    @Thatblue.s4 2 года назад +3

    Quick heads up on this intake.. Keep checking it regularly.. A lot of times the filter just falls on the side.. The coupler / heat shield is not designed properly.
    My recommendation would be to use a different filter or run no heat shield.

    • @bunnyboosted6530
      @bunnyboosted6530  2 года назад

      I did see it fall off once. I will check it again! Thank you 🙏

    • @Thatblue.s4
      @Thatblue.s4 2 года назад

      @@bunnyboosted6530 no worries I went with afe power filter with cts turbo intake pipe and made the hole bigger on the heat shield.. Now it's good

    • @anthonywallace319
      @anthonywallace319 Год назад +1

      Yep repeatedly had this problem on my B9 S5. You could tell when the turbo spool sounded louder than normal. Going with a different intake on my RS5, but other than that, it was a decent intake.

  • @zararkhan9763
    @zararkhan9763 Год назад +1

    I wonder how it sounds without the intercooler and stage 1??

    • @bunnyboosted6530
      @bunnyboosted6530  Год назад +1

      Check out the shorts! :) I have a stage 1 on there

  • @curtdragon
    @curtdragon 2 года назад +1

    Did you put a mic near the intake or is it that loud inside?

    • @bunnyboosted6530
      @bunnyboosted6530  2 года назад +2

      There was no external mic. The sun roof was cracked open a little so you can hear it from the outside ! Still very loud

  • @Louie90s
    @Louie90s 4 месяца назад

    Hey guy's, just wondering where did you purchase those paddle shifters? Thank you in advance

    • @bunnyboosted6530
      @bunnyboosted6530  4 месяца назад +1

      www.dsg-paddles.com/products/v4-carbon-fiber-paddles-for-audi

  • @jlc2370
    @jlc2370 6 месяцев назад

    Were you tuned with this intake ? Or any other mods ?? I want mine to sound like this but can’t tune cuz i have a warranty still

    • @bunnyboosted6530
      @bunnyboosted6530  6 месяцев назад

      Yes I was stage 1. Check with Audi Make sure they don’t void your warranty over intake because they might if something goes wrong. Or just swap it out before you go to dealer.

  • @al3nnnn
    @al3nnnn 3 месяца назад

    Hey, i know you haven’t had problems with it falling off by randomly after about a couple weeks mine fell off when I checked on the hood and I put double sided tape on the inside of the filter itself before installing it again and tightening the clamps again. I’ve also heard people get new clamps that are heavy duty. I will see how it holds up now and check on it whenever I drive. Hopefully it doesn’t slip off. How often do you tighten the clamps?

    • @bunnyboosted6530
      @bunnyboosted6530  3 месяца назад +1

      After I had my mechanic tighten it my original clamps that came with the package it never fell off again. Make sure it’s fully seeded then tighten the clamps very hard, hard as you can. It shouldn’t fall off after that. Cause the vibration can loosen the clamp causing it to turn.

    • @jad112701
      @jad112701 Месяц назад

      @@bunnyboosted6530 I’m gonna get one this week do you think it falling of is a big enough issue for me to buy a differnt one…… or do you think if I tell the mechanic installing it to ensure it’s tight I will be fine?

  • @angelcarrasco1566
    @angelcarrasco1566 3 месяца назад

    How is the intake holding up since then any issues ? Thinking of getting this one for my b9 as well🤘

    • @bunnyboosted6530
      @bunnyboosted6530  3 месяца назад

      No issues just tighten and you’ll be fine 😃

  • @takeoverdept.
    @takeoverdept. 2 года назад

    Would this fuck up the warranty plan on my s4 if I do it? Also love the vid

    • @bunnyboosted6530
      @bunnyboosted6530  2 года назад

      I know that any tunes you do or upgrading something that causes the stock part to break will void the warranty plan. Thanks for watching :D

  • @ricegrain4u
    @ricegrain4u 4 месяца назад

    So a year on, do you still recommend this? I just bought my b9 and am curious if you have issues of it always falling off or anything else?

    • @bunnyboosted6530
      @bunnyboosted6530  4 месяца назад +1

      Just tighten it. No more problems for me. Never fell off.

    • @ricegrain4u
      @ricegrain4u 4 месяца назад

      ​@bunnyboosted6530 if you got the option to do it again, would you go with the cts again or an enclosed one?

    • @bunnyboosted6530
      @bunnyboosted6530  4 месяца назад +1

      Hmm when I bought the CTS it was on sale that’s pretty much the reason why. It is preference. It hasn’t given me any issues and worked just fine. Some people would prefer a nicer brand like APR or something but that’s out of my price range.

  • @leandrocimbali4417
    @leandrocimbali4417 2 года назад +3

    Ofcourse it's loud, is an open box, i just cut a hole on my stock airbox same results less heat k&n filter tho

    • @bunnyboosted6530
      @bunnyboosted6530  2 года назад +3

      😅😂 aye do what you gotta do. It was my first time installing an intake on any car before so I was quite excited about the results!

    • @leandrocimbali4417
      @leandrocimbali4417 2 года назад +1

      @@bunnyboosted6530 im not hating, im just saying you did good tho

  • @TeamJORDAN-rh1zq
    @TeamJORDAN-rh1zq Год назад

    Should of bought the turbo inlets stocks is restricted

  • @kobebryant5135
    @kobebryant5135 Год назад +3

    and then delete the resonator, this is the cheapest combo to sound better

  • @cla.n4305
    @cla.n4305 Год назад +1

    Dopo l'installazione hai dovuto quantomeno rimappare o rivedere la centralina!!!

    • @bunnyboosted6530
      @bunnyboosted6530  Год назад

      Check out my other videos on tunes! ruclips.net/video/mrhIm5E6XnM/видео.html

    • @cla.n4305
      @cla.n4305 Год назад

      @@bunnyboosted6530 ottimo ! Anche perché solo con quel filtro avrebbe perso in ripresa e poi buchi enormi in erogazione😅😅😅! Ora fa paura vero? 👍👍👍

    • @bunnyboosted6530
      @bunnyboosted6530  Год назад +1

      Ah that’s bad luck! Hopefully you got a replacement for free!!

  • @Seabassvids27
    @Seabassvids27 Год назад

    Did you fix the filter problem? Mind just keeps falling 🥲

    • @bunnyboosted6530
      @bunnyboosted6530  Год назад +1

      You just have to tighten it really well. Mine stopped falling off. If you can get that shield to stabilize and not shake as much, it won’t fall from the vibration of the car.