Recently got my first drift chassis, it's a DLR8. Every other tutorial videos helped me a lot to get the electronics working. But I wonder if you have any steering system setup guide teaching people how to setup toe, camber, caster and ackermann properly without spinning out or under steering, thank you!
I haven't done any setup video yet. Most of my tuning is pretty much eyeballing it and test drive. I also use Xpower MIT manual for guide. Here it is. www.dropbox.com/scl/fi/8o95289esu5tx95strf7a/MIT-Set-up-manual.pdf?rlkey=91buesezlmx9350a7ob61w6mu&e=1&dl=0
I want to reset my steering end points after resetting my ackerman to my liking, but the gyro epa is already set. Do I need to unplug servo from gyro and plug into rx to rest the recalibrate gyro? Or is there a way to leave it plugged into gyro, set max ep’s then calibrate gyro again?
Yes, you will have to unplug the gyro and set the EPA with only the gyro first before plugging it in again to set new EPA. Unfortunately, so far I haven't able to figure out a way to reset this gyro to default (no EPA) yet.
Drift Art 3S is a really good kit. It has the best performance out of the box with very versatile wheelbase + width. However, it is a bit difficult to build. Drift Art 4 might come out soon with some improved parts to make it easier to build. So, if it comes out by that time then it's probably the best option. Atomic DRZ3 is sort of middle of the the road with relatively easy build and good performance out of the box. For 1/24 you can look at BMR-X. It's the best price per performance wise. For unlimited budget there is MA Racing.
Your videos give me good information ✨🤞🏼✨ Can you please check the Hotrc f11 gyro? It's on level V3 they said. But it's very cheap only under 20€ on ali.
![[Review & Tutorial] Power HD G1 Drift Gyro With EPA](http://i.ytimg.com/vi/fM4rk6PV0ls/mqdefault.jpg)
![[Review & Tutorial] Power HD G1 Drift Gyro With EPA](/img/tr.png)
![[Tutorial] How to Calibrate and Program Drift Art ESC](http://i.ytimg.com/vi/vH2RLdTYuy8/mqdefault.jpg)
I see you with the tennis racquet tape.
Recently got my first drift chassis, it's a DLR8. Every other tutorial videos helped me a lot to get the electronics working. But I wonder if you have any steering system setup guide teaching people how to setup toe, camber, caster and ackermann properly without spinning out or under steering, thank you!
I haven't done any setup video yet. Most of my tuning is pretty much eyeballing it and test drive.
I also use Xpower MIT manual for guide. Here it is. www.dropbox.com/scl/fi/8o95289esu5tx95strf7a/MIT-Set-up-manual.pdf?rlkey=91buesezlmx9350a7ob61w6mu&e=1&dl=0
I want to reset my steering end points after resetting my ackerman to my liking, but the gyro epa is already set. Do I need to unplug servo from gyro and plug into rx to rest the recalibrate gyro? Or is there a way to leave it plugged into gyro, set max ep’s then calibrate gyro again?
Yes, you will have to unplug the gyro and set the EPA with only the gyro first before plugging it in again to set new EPA.
Unfortunately, so far I haven't able to figure out a way to reset this gyro to default (no EPA) yet.
Nice video as always.
As someone that is looking to build a mini drifter from scratch over the winter, can you recommend a good kit?
Drift Art 3S is a really good kit. It has the best performance out of the box with very versatile wheelbase + width. However, it is a bit difficult to build. Drift Art 4 might come out soon with some improved parts to make it easier to build. So, if it comes out by that time then it's probably the best option.
Atomic DRZ3 is sort of middle of the the road with relatively easy build and good performance out of the box.
For 1/24 you can look at BMR-X. It's the best price per performance wise. For unlimited budget there is MA Racing.
@@BeaversHobby thanks man, i really appreciate it!
looks like a das mikro in a shell, the wires even look the same
Can you please make a video of the Hotrc f11 gyro? Because I can't find any manual 🙏🏼
Will do.
@@BeaversHobby thanks a lot ✨
Your videos give me good information ✨🤞🏼✨
Can you please check the Hotrc f11 gyro? It's on level V3 they said. But it's very cheap only under 20€ on ali.
It look similar to dasmicro gyro v5😅
It might as well be the same board.
Oem
Tiny!