Ohh my I have watched a lot of your videos you're like a kitten in the candy store it's so neat to watch thanks for sharing your videos I appreciate that I love the tools that you're using but out of my budget unfortunate and again thank you for sharing and Happy New Year
I've been waiting to see the use of these guide slides but I doubt you need to pack it away as your very busy all the time a great video thanks for sharing 👏👏
Felt the bag in a store. Bought the makita bag. Thicker More padding Not as good looking. Holds festool rails just fine, 4. 2 pairs face to face on each side Tight fit 3 is snug
Evolution tools probably 1/4 the cost and fits festool maffel Makita and whole load more. 2 1.4m tracks joining rails clamps and a bag £100($120) just saying
Please make sure the physical security of your building is top notch. There is a great deal of money tied up in the hundreds of Festool tools you have, and I'd hate to see the bad guys get their hands on them.
... What I can say about it🤘😜🤘??? Today HE is the happiest man in the all World!!! "Festool", " Mafell "," Bosh", "Aibenschtok", " Hilti"-the🎨👾👏 the legend for carpenters(sorry for my bad "franch" [🔧Wrench], but👏👷 calambur:"carpenters with/under "Festool" &co.is not simply carpenters, but 👏👷carpenters painters🎨panters Hi quolitat&quantity garanty). Nice👍👏😊, nice fact-act.
What good are your videos opening a brand new tool the 70% of tradesmen dont wanna fork out the $ for….😂 my buddy who has a full blown cabinetmakers shop were chattin about this chanel the other day & just chuckled🎉. godbless the USA land of wastefull spending!
Always tighten the bottom rail first. It will pull the tracks straight. The top one is just for stability.
What do you mean the bottom rail?
Also, I’ve heard it’s important that you mark the rails so you always connect them the same.
Ohh my I have watched a lot of your videos you're like a kitten in the candy store it's so neat to watch thanks for sharing your videos I appreciate that I love the tools that you're using but out of my budget unfortunate and again thank you for sharing and Happy New Year
You know what? This is really nice! Why the bag got me, you can store everything in one bag. Well done Festool
🙌🙌
These rails are so good. I take 3 long ones and a small one out in the van. Thanks again for another great vid. Hope the new workshop is going wel. l
Thanks! I appreciate that very much!
I've been waiting to see the use of these guide slides but I doubt you need to pack it away as your very busy all the time a great video thanks for sharing 👏👏
Festool makes some fantastic tools! Great stuff!
Yes they do👏🙌
Every frigging day is Christmas in this shop. You got to love it!
Got festool saw running on an Evolution track at a quarter of the price? Great results! 😀🏴🏴
I like the little case for the connecting rods. I just use the original little box sleeve that they came in.
Great track saw, I'll put it on my wish list !
Dusty always using the best tool available
Your shop is starting to look like a Festtool display center!! lol
🤣🤣
What do you mean starting too……it’s way passed that.
I bought this set after getting a used TS55 and it does what I need perfectly. - Chris
that's awesome to hear
My favorite videos on RUclips!
If they were to put in the angle guide, that would be great.👍🏝️🇨🇦
These would all be very nice tools to have but I'll be content when I get the next few saws I need
Dusty - I love your content.
I appreciate that
SHOW!!! My Friend..... Machines Top!!
Many thanks!!
Festool when he builds for his customers, Einhell when he builds for himself 👍.
Nice railway 😀🍀🖐️
😁
Ça me fait rêver de voir tous ces outils festool
Malheureusement j'ai pas les moyens
😊 Hurraa ✌️ good tool 🙋♂️ 🇪🇪 👍 👋😇
Festool. When tools are more important than the job.
I went for a long time before getting my first but @festoolcanada makes such well engineered tools, after I got one I kept getting more 😁
@@dustylumbercoBig leap of faith, but well worth it.
Cheers from Cowichan Bay 🏝️
Salam kenal dari Indonesia..
Hasil kerjanya sangat luar biasa bagus
This track set is priced fairly for the quality. I just bought one for one of my crews
Do u buy new equipments for each new task....😅🤔
Делай пожалуйста себя чуть дальше, чтобы плюсом видеть всю широту и красоту твоего помещения!!)
Interessante o alinhamento final ser feito por quem compra .
I assume these two rails combined can rip whole plywood length? (4' x 8')
MAKITA 😊
👍
Felt the bag in a store.
Bought the makita bag.
Thicker
More padding
Not as good looking.
Holds festool rails just fine, 4.
2 pairs face to face on each side
Tight fit
3 is snug
That will be $400?
I think you must have more Festool tools than Festool now.
🤣🤣
How much.
Evolution tools probably 1/4 the cost and fits festool maffel Makita and whole load more. 2 1.4m tracks joining rails clamps and a bag £100($120) just saying
Será compatible con la cierra circular bosch?
No
How much does it cost?
I wonder....u make more money from building projects or from the videos of u building said projects?
👍👍❤
👏👍
i dont get it, whats new on that? ^^
FESTOOL HAS THE BEST NEW TOOL SMELL!
🤣🙌😁
Hi papa, can you teach me some carpentry dad🙋♂️
The assembly doesn’t stay straight. I ended up buying a long track.
Кааааайф😍🔥🤩
👍👏
Would be better if it came in 1525mm lengths so you can cut 10 ft sheet.
Festool, when you absolutely, positively have to overpay.
It kinda sucks no one has figured out a way to make any connectors toolless, or at least have it onboard
🙌
❤
👍👍
Please make sure the physical security of your building is top notch. There is a great deal of money tied up in the hundreds of Festool tools you have, and I'd hate to see the bad guys get their hands on them.
👌👌👍👍🙋♂️🙋♂️
🙌
... What I can say about it🤘😜🤘???
Today HE is the happiest man in the
all World!!! "Festool", " Mafell "," Bosh",
"Aibenschtok", " Hilti"-the🎨👾👏
the legend for carpenters(sorry for my bad "franch" [🔧Wrench], but👏👷
calambur:"carpenters with/under
"Festool" &co.is not simply carpenters, but 👏👷carpenters
painters🎨panters
Hi quolitat&quantity garanty).
Nice👍👏😊, nice fact-act.
👍👍
Il faut avoir beaucoup de clients pour acheter tout ce matériel...
👏
Однажы я разбогатею и смогу себе позволить такой же набор, ну а пока что в качестве направляющей шины для пиления приходится использовать доску.
A lot of work for one cut
well I´ll guess you have to do more than a single cut when you´re doing an project. Besides you can also use a single rail if the cut isn´t that long.
👍
You assembled connectors in the wrong order.
Top sa
👍👍
Con un quarto del costo makita ti da di più
😂😂 just showed my mate some of yor vids, he goes faaark he's better than tim the tool man.
Didn’t even read the instructions.
De a gratis quien no
Originally I bought everything. Now some stuff is sponsored but it’s not free. There is a lot of time and effort that goes into content creation.
First few times saw the channel pop up was actually interesting but now it’s always an add
How is this different than the track saw you already have from them? Curious, not being facetious.
What good are your videos opening a brand new tool the 70% of tradesmen dont wanna fork out the $ for….😂 my buddy who has a full blown cabinetmakers shop were chattin about this chanel the other day & just chuckled🎉. godbless the USA land of wastefull spending!
Just Because you have no Money haha
Festool ist worth every penny suc….
You know he is in Canada, right?
@@tonno8644. I would not use this stuff in the field.
If your numbers are correct then there's 30% willing to spend...
i had my comment deleted (dummmmies of TY) so I will say it again - no union tradesman I know uses, or would use, this stuff in the field.
Дорогая сумкка 10000 нарубли
Пустая?
$$$$$$$$$😢
This bloke must have more money than the great Donald Trump.
Mimimimimi
How is he great lol, he bankrupted a casino rofl
🤣
Three words that definitely don’t belong in a sentence….great and Donald trump …..now if you substituted “shithead” for great…….
Meh, needed? 🤷🏻♂️
👍
What is that wall mounting system you have back there @dustylumberco
Must be nice to get free stuff or have money.
Originally I bought everything. Now some stuff is sponsored but it’s not free. There is a lot of time and effort that goes into content creation.
Overpriced
Hi, you forgot calibration the line...