Dusty can I be the first to say that is wicked awesome. Your old garbage one (joke) you need to send that to a new home with any of your old replaced tools. We run a sanctuary in South Carolina for old tools to be able to run free for the rest of their lives. We will pick up.
@@DrJWR1 the ability to do blind cuts, and therefore to cut any size log. Both saw types have their strengths and weaknesses, but I find the circular saw to be more versatile.
I will take 50 rough cut 2 x 6 x 8 feet for my first order please 😂😂😂😂😂….. wow that is a beast my friend …. Congratulations. Awesome. I am sure you will be putting it through its paces and hope to see it in action…. 👍👍👍👍👍👍👍👍👍👍👍
@@dawid6914 can start with a jointer and do two sides and then go to a planer or set up a jig for a router ti flatten each side and then make 90 to each other
These swing blade are more efficient at cutting dimensional lumber and timbers up to 12x12. There is no need for an edger as you edge the boards as you go. You can also change the cuts to easily optimize for grain direction and the circular saw blade gives you very straight cuts. The blades last a very long time and don't need to be changed and you can sharpen the blade right on the mill in minutes. You can also put a planer blade on to plan slabs flat to plan Timbers.
Das ist ein Witz oder? Kabelgebundenen könnte vielleicht noch in Frage kommen aber Akkus auf gar keinen Fall. Dusty nutzt die Säge um das Rohmaterial herzustellen, der verbrennet ist einfach praktischer
These swing blade are more efficient at cutting dimensional lumber and timbers up to 12x12. There is no need for an edger as you edge the boards as you go. You can also change the cuts to easily optimize for grain direction and the circular saw blade gives you very straight cuts. The blades last a very long time and don't need to be changed and you can sharpen the blade right on the mill in minutes. You can also put a planer blade on to plan slabs flat to plane Timbers.
Niiice... I think I remember the video where you first introduced this bad boy...cuts both ways...quite the machine. Two questions: 1. Is it staying indoors? 2. Wanna sell your Woodland mill? 🤷♂️
Thanks very much! It's awesome to finally set it up at my new shop. We just assembled it inside, it has now been moved outside the shop. I have already sold my Woodland Mill.
@@dustylumbercoWhy did you choose a swing blade over a wood mizer for example? The bandsaw seems more versatile. Nevertheless awesome new saw and gerat vid
@ I have had a bandsaw mill for quite a few years. These swing blade are more efficient at cutting dimensional lumber and timers up to 12x12. There is no need to roll the log and no need for an edger as you edge the boards as you go. You can also change the cuts to easily optimize for grain direction and the circular saw blade gives you bee straight cuts. The blades last a very long time and don’t need to be changed and you can sharpen the blade right on the mill in minutes. You can also put a planer blade on to plane slabs flat to plane Timbers.
I never saw them look at the manual once! Amazing.
It was close by but these guys are from Turbosawmill and are very experience with the assembly 👍😁
They’ve definitely done that before. Impressive. And what a beast it is
It is awesome! I enjoyed their visit to Canada and their help with the assembly
Quanto custa uma máquina dessa. ...
Can’t wait to see it in action!
Thanks! I have that video already posted to my Facebook page
Wow - that’s awesome!
Dusty can I be the first to say that is wicked awesome. Your old garbage one (joke) you need to send that to a new home with any of your old replaced tools. We run a sanctuary in South Carolina for old tools to be able to run free for the rest of their lives. We will pick up.
Thanks very much! It's very exciting to add this to my shop. 😁😁😁
You should have gotten the electric motor version?
Thank you, very useful to see how it's out together
What recommends this saw over a band saw?
@@DrJWR1 the ability to do blind cuts, and therefore to cut any size log. Both saw types have their strengths and weaknesses, but I find the circular saw to be more versatile.
You had me at turbo
👍😁
As soon as I win Lotto, I'm gonna attempt tp replicate your shop. Just love your content.
😁😁
Great stuff
Thanks! 🙌👏
I will take 50 rough cut 2 x 6 x 8 feet for my first order please 😂😂😂😂😂….. wow that is a beast my friend …. Congratulations. Awesome. I am sure you will be putting it through its paces and hope to see it in action…. 👍👍👍👍👍👍👍👍👍👍👍
Thanks for watching! I hope to share more cuts soon.
Wow!! Tecnologia de punta, facil, presiso, tiempo adecuado.
De Tecamac, EdoMex/México 🇲🇽
☕☕
It is awesome. Thank you
I've seen a few videos of those sawing, and what beasts they are!!!
Great stuff! 😁
Yeah they are pretty powerful! 🙌👍
That’s quite a radial arm saw!!!
I'm still afraid of my table saw, so there's that😂😂😂
👏🙌
Is this one of those if i win the lottery I'm not telling anyone but there will be signs!?! Man, lots of new tools in the new shop!
🤣🙌👏
Does the gas engine just power the blade then what powers the travel down the length of the log?
turbosawmill.com/m12-28a-sawmill/
Saludos desde España, una pasada de máquina
wonderful 🥰👍🤗💐
Thank you! 😁
Awesome
Thanks!
Dusty, will the motor exhaust create any issues inside your shop? Does it need ventilation? I am amazed at the size of this beast!
We just assembled it inside, it gets moved outside when in use
Wow, not an assembly instruction manual in sight, I'm impressed!
It was around but these guys are from Turbosawmill and very experienced with the assembly.
Damn! And y'all didn't have to look at the directions once!! 😂 ✌🏼😎
These guys are from Turbosawmill and were awesome to have there to help me assemble
That is HUGEEEEEEEE!!!!😂😂😂😂
This small screws for that blade? 🥶
They are plenty strong
👍👍
Hey Dusty what in Your opinion is most efficient way to plane 3m long 6x6 square timber? :/ using a planer is rly hard work mby some advice?
@@dawid6914 can start with a jointer and do two sides and then go to a planer or set up a jig for a router ti flatten each side and then make 90 to each other
That's the one I want.
😁👍👍
That things a little bit scary lol nice! But scary 😅
Frage , die Maschine hat einen Verbrennungsmotor ? Bleibt die in der Halle stehen , oder kommt die noch nach draußen??
Very nice
Thank you
As soon as he put that saddle clamp on I immediately thought, never saddle a dead horse.
🤣
Looks like they did this once before ?
Glad I didn’t buy a plane✈️ in a box. Nice job setting it up.🎉
Ild be interested in what your opinion is on it after using it a little!
These swing blade are more efficient at cutting dimensional lumber and timbers up to 12x12. There is no need for an edger as you edge the boards as you go. You can also change the cuts to easily optimize for grain direction and the circular saw blade gives you very straight cuts. The blades last a very long time and don't need to be changed and you can sharpen the blade right on the mill in minutes. You can also put a planer blade on to plan slabs flat to plan Timbers.
I also like the fact you cut wood in both directions.
Nice saw!
Very impressive I’ve never seen anything like this
Die Säge ist toll, aber warum nicht mit Strom /Akku?😮
Das ist ein Witz oder? Kabelgebundenen könnte vielleicht noch in Frage kommen aber Akkus auf gar keinen Fall. Dusty nutzt die Säge um das Rohmaterial herzustellen, der verbrennet ist einfach praktischer
Gas powered delivery a higher performance for these big tasks
@@dustylumberco 👍
Caramba!!!! Massa demais.
Nice to see it in action on your facebook. Is it here on your yt page also?
Not yet
For the price, it should come with two guys to put it together!
Now that is sweet
It's awesome! I am excited 👍😁
It looks like that saw mill is limited cutting planks compared to a bandsaw type
These swing blade are more efficient at cutting dimensional lumber and timbers up to 12x12. There is no need for an edger as you edge the boards as you go. You can also change the cuts to easily optimize for grain direction and the circular saw blade gives you very straight cuts. The blades last a very long time and don't need to be changed and you can sharpen the blade right on the mill in minutes. You can also put a planer blade on to plan slabs flat to plane Timbers.
Niiice...
I think I remember the video where you first introduced this bad boy...cuts both ways...quite the machine.
Two questions:
1. Is it staying indoors?
2. Wanna sell your Woodland mill?
🤷♂️
Thanks very much! It's awesome to finally set it up at my new shop.
We just assembled it inside, it has now been moved outside the shop. I have already sold my Woodland Mill.
@@dustylumbercoWhy did you choose a swing blade over a wood mizer for example? The bandsaw seems more versatile. Nevertheless awesome new saw and gerat vid
@ I have had a bandsaw mill for quite a few years.
These swing blade are more efficient at cutting dimensional lumber and timers up to 12x12. There is no need to roll the log and no need for an edger as you edge the boards as you go. You can also change the cuts to easily optimize for grain direction and the circular saw blade gives you bee straight cuts. The blades last a very long time and don’t need to be changed and you can sharpen the blade right on the mill in minutes. You can also put a planer blade on to plane slabs flat to plane Timbers.
@@dustylumberco Makes total sense, thank you very much for replying to comments
@@dustylumberco thx, Dusty...I would have scooped that Woodland mill if I was in the neighborhood
Price range?
Now that's bad @ss!!
👏 👏 👏 👏
It is awesome! 👏👏
Okay Dusty, ballpark price??
It was $35,000
Qual o valor de uma máquina dessa obrigado
Bu aletin kesim yaptığını görmek isterim kardeş.
I have posted that in another video 👍
Hmm, A Spike Leveling feet on your beautiful concrete floor 😬😳.
We just assembled it inside, it has been moved outside now 👍
Honda engine❤
👏🏻👏🏻👏🏻🇲🇽😺🐾
👏👏😁
Price for bd
Italy biutful 👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻💯💯👍
👍
That's not your grandma's saw...
🤣🙌