Im actually not sure if it influences rumble codes when having shooting not on the triggers = potentially no advanced trigger feedback. If that is the case just switch it off from southpaw and use a manual smart action that swaps sticks when looting. So you can loot with the mouse.
Hey, older codes will always work with newer firmware versions. Its just that codes generated under a new firmware wont work on older firmware versions. So yes to your question, it will still work! :)
Smoothing is mainly to change the AA interaction. The creator of this config uses two smoothing profiles and both are shown throughout the video. One is 0-0-0 i think and the other contains a custom smoothing setup that offers more AA.
Hab mal eine frage wobei ich die antwort denke ich mal kenne. Ich bin t250 in cod schon seit längerer zeit und spiele die legendäre matutaiki curve und 3 - 9 - 8 values für das feeling der apex. Ist die Matutaiki curve überhaupt noch das „beste“ oder bringt mir die curve im aktuellen video mehr?
Die Kurve im Video erhöht den AA nur ganz leicht bei schnellen Bewegungen wohingegen matutaiki das bei egal welcher Geschwindigkeit macht. Was du überlegen kannst ist velocity calibration und quantize hinzu zufügen. Das erhöht den AA nochmal deutlich! Werde Anfang nächstes Jahr ein Tutorial zu beiden hochladen!
I wouldnt recommend to use a curve with a controller since that will significantly change how your stick behaves in the game. So your muscle memory might be gone afterwards.
Yes thats possible! You can use hotkeys for that. Assign a hotkey to your config and press it to instantly load it. Requirements are to not have the manager open at the same time, and set hotkey switching to "do not require Nav Mode" in the global settings.
Hey, please request such things in the XIM Forum (Game Support topic) as the responsive person at XIM only evaulates such requests from that source! :)
There can be a few reasons. For example some mice perform bad on higher DPIs, or that using low DPI can come with some natural smoothing and quantization.
That is the latest official firmware which is older than the beta firmware you will need for this config. See one of my latest video uplodas for the latest beta firmware = from december instead of february (your firmware).
Brother, I have downloaded configurations for all games except Destiny 2 since the release of Xim Matrix. I know that there are many community configurations, but they are not like the one you are releasing, so I hope that you will release a configuration for Destiny 2 as soon as possible. Thank you.
@ both. Cuz people are using the fact that you didn’t a upload a video about the game and showing us how to set a config for the game and their selling configs 💔 We need both ASAP please 🙏🏻
@@theonlyweriez8375 I can try to be faster for future game releases + config videos. For marvel rivals i would recommend the following two configs right now: 1) configs.xim.tech/configs/marvel-rivals-headshots-with-smart-actions/ 2) configs.xim.tech/configs/nessis-marvel-rivals-config-nessi/
You can change the binding layout to your personal preference. You must not use the layout of the config creator. Just make sure you dont cause any binding conflicts where maybe two bindings are placed to the same key by accident.
@ yeah of course it was just a suggestion maybe some people don’t know that and miss out on the advantage. Also does there appear a problem if I bind one thing on two bindings?
Just started the early access for my first Matrix controller config video a few days, which will be for Valorant. If its well received ill release more controller config videos! 🥳💪
Why should he agree to that? What is in for him to basically play against a total stranger? He is doing wagers though, so if you put money down the line he may actually agree.
Hey, the only change to my current OW2 config video would be the advice to use the new OW2 ST and the smoothing preset "Synchronous". Everything else would stay the same as in the config guide video.
Scummy bait 90% of the people watching this video are on KBM Not a controller Less than 5% of the community uses a controller, and then you start to understand that this video wasn't from a "Pro" but simply a marketing tactic Od1n was hoping that when the controller players that Hate Xim users search a video about the Matrix they will find this and be mesmerized 😵 Like WOW look at all this stuff we could possible do!!!!! This config was ass bro, I respect the Marketing tactics tho 😉🤣🤣🤣🤣
The video is from an actual ALGS pro who will attend LAN in January again. And the entire config is what he used to get to LAN. Plus it can be used with a controller too. Simply change the bindings to a controller using modifiers. So i really dont know what you mean.
Link Channel Membership Subscription: ruclips.net/user/XIMCentraljoin
Buy XIM Matrix here (paid links):
Cheapest = Flashback: www.flashbackltd.com/products/xim-matrix-multi-input-adapter?_pos=1&_sid=891068637&_ss=r&aff=66
Amazon US: amzn.to/3DTZkFS
Amazon Germany: amzn.to/3KFbsyd
Amazon UK: - in a few weeks -
Amazon France: amzn.to/45Pr5es
Amazon Italy: amzn.to/4609Ebg
All XIM Distributors & their shops: xim.tech/shop/
Config Code: controlc.com/64a98bdb
Curve Code: controlc.com/1a1e61b6
Config Code Care Pack: controlc.com/6c8d78c7
Video Controller Setup Guide: ruclips.net/video/fysD-A6P7ps/видео.html
Video Find Your Optimal Mouse Sensitivity: ruclips.net/video/l3WmJmngrPE/видео.html
Snap Tap Setup video: ruclips.net/video/IlcAGaD5QyY/видео.html
Hello.. I want the settings for the R6 Xam Matrix. Please send me a link.
Hey, you can find a full XIM Matrix R6 config video on my channel! :)
Correct me if I'm wrong.
With this configuration you can't use the rumble trigger right?
Since attack on X and not on R2?
Im actually not sure if it influences rumble codes when having shooting not on the triggers = potentially no advanced trigger feedback. If that is the case just switch it off from southpaw and use a manual smart action that swaps sticks when looting. So you can loot with the mouse.
Question is the soldier 76 configuration from a month ago invalid bc of the firmware update?
Hey, older codes will always work with newer firmware versions. Its just that codes generated under a new firmware wont work on older firmware versions. So yes to your question, it will still work! :)
Why would you use 0-0-0 instead of Synchronous?
is there any difference with Disabled?
Smoothing is mainly to change the AA interaction. The creator of this config uses two smoothing profiles and both are shown throughout the video. One is 0-0-0 i think and the other contains a custom smoothing setup that offers more AA.
Hab mal eine frage wobei ich die antwort denke ich mal kenne. Ich bin t250 in cod schon seit längerer zeit und spiele die legendäre matutaiki curve und 3 - 9 - 8 values für das feeling der apex. Ist die Matutaiki curve überhaupt noch das „beste“ oder bringt mir die curve im aktuellen video mehr?
Die Kurve im Video erhöht den AA nur ganz leicht bei schnellen Bewegungen wohingegen matutaiki das bei egal welcher Geschwindigkeit macht. Was du überlegen kannst ist velocity calibration und quantize hinzu zufügen. Das erhöht den AA nochmal deutlich! Werde Anfang nächstes Jahr ein Tutorial zu beiden hochladen!
quick curve aiming aid for suits and for gamepad?
I wouldnt recommend to use a curve with a controller since that will significantly change how your stick behaves in the game. So your muscle memory might be gone afterwards.
hello thank you so much for your videos; i have a question in regards of swapping between configs within the xim matrix is it possible?
Yes thats possible! You can use hotkeys for that. Assign a hotkey to your config and press it to instantly load it. Requirements are to not have the manager open at the same time, and set hotkey switching to "do not require Nav Mode" in the global settings.
What dpi should we be running on our mouse???
Hey, for that please see the beginning of the video! :)
Hi, can we get marvel rivals dual and linear curve confg, just like overwatch 😬. And thanks 4 the great videos man😊
Hey, please request such things in the XIM Forum (Game Support topic) as the responsive person at XIM only evaulates such requests from that source! :)
Bro thanks for all things 1q regarding for custom look control // ADS value??
Cuz not showing in the video
Hey, thats shown in the beginning of the video. I think its the first chapter of the video.
what if im playing on fov 110 on a 2k monitor?
FoV only changes the perceived sensitivity in Apex Legends i think while everything else stays the same.
I keep getting invalid format for the config
Hey, your config needs to be on the latest beta firmware for the code to work. Please update both your XIM Firmware and your XIM manager.
Why does he use 1600 when xim recommends the highest dpi possible? Is low dpi better or the same?
There can be a few reasons. For example some mice perform bad on higher DPIs, or that using low DPI can come with some natural smoothing and quantization.
can u do a. anti recoil guide for rust console?
This may actually become a reality quite soon. Not fully discussed yet but may happen. Will release a video with an update once i know more!
i hate that mapping slots are so limited. i want to add a lot more mappings to my config but i am always at maximum capacity.
Are you under the new beta firmware? That one more than doubled the capacity.
It's crazy you guys do all this shit and still get dumpstered
I dumpster these poor simpletons with my own custom configuration
Id love to see you dumping on the config creator who attended ALGS LAN! :)
@@XIMCentral Cheaters don't go to LAN, why don't you name drop them so we can expose them for breaking BLGS rules too?
@@TC-Drums You would be surprised how many XIM users have went to LAN already. And no i will obviously not expose them! :)
@@XIMCentral And they were on stage with their xim plugged in to compete too right?
7.00.20242019 is a last version ?
That is the latest official firmware which is older than the beta firmware you will need for this config. See one of my latest video uplodas for the latest beta firmware = from december instead of february (your firmware).
Is this config anti recoils i tried i still have recoils i just did for try. i dont even play apex much, but i still had recoils
You need to use the ingame settings shown in the video. You cannot use anything else for those to work.
Brother, I have downloaded configurations for all games except Destiny 2 since the release of Xim Matrix. I know that there are many community configurations, but they are not like the one you are releasing, so I hope that you will release a configuration for Destiny 2 as soon as possible. Thank you.
Wow happy to hear that man! I think will do a BO6 config video next! After that im open to suggestions! :)
@ Thank you, I hope you make a configuration for Destiny as soon as possible.
Can someone make it for me then give me the copy and paste code thing?
As always, the copy and paste code is in the video description! ;)
When is the marvel rivals guide coming out?
You mean a config guide? Or a XIM game profile?
@ both. Cuz people are using the fact that you didn’t a upload a video about the game and showing us how to set a config for the game and their selling configs 💔
We need both ASAP please 🙏🏻
@@theonlyweriez8375 I can try to be faster for future game releases + config videos. For marvel rivals i would recommend the following two configs right now:
1) configs.xim.tech/configs/marvel-rivals-headshots-with-smart-actions/
2) configs.xim.tech/configs/nessis-marvel-rivals-config-nessi/
@@XIMCentral thank you so much 💜
bro why dont you use R for Reload and stuff you can reload in front of a door (only for pc users)
You can change the binding layout to your personal preference. You must not use the layout of the config creator. Just make sure you dont cause any binding conflicts where maybe two bindings are placed to the same key by accident.
@ yeah of course it was just a suggestion maybe some people don’t know that and miss out on the advantage. Also does there appear a problem if I bind one thing on two bindings?
how to copy the config from your video and paste it into xim matrix
Copy the whole code and then press the "paste" button in your first config screen. This requires your XIM + manager to be on the latest beta.
hi xim central could you also make a tutorial for controller love the vids
Just started the early access for my first Matrix controller config video a few days, which will be for Valorant. If its well received ill release more controller config videos! 🥳💪
I'd like a opportunity to shit on your "ALGS pro" first to ten in the range with my vanilla settings please
Why should he agree to that? What is in for him to basically play against a total stranger? He is doing wagers though, so if you put money down the line he may actually agree.
Can u make a new ow2 config?
Hey, the only change to my current OW2 config video would be the advice to use the new OW2 ST and the smoothing preset "Synchronous". Everything else would stay the same as in the config guide video.
Will marvel rivals supprt come soon?
Yep its being worked on!
Could you make a Fortnite config video?
I think will do a BO6 config video next! After that im open to suggestions! :)
Nice videos;).Pls videos on Destiny 2 🙏🙏🙏🙏🙏setting
Hey, i have replied to your other comment! :)
It doesn't have nemesis on it
Might be in the care package config.
Nemesis anti recoil please
Might be in the care package config.
Invalid bilding format
Hey, the code requires your XIM + manager to be on the latest beta.
@XIMCentral I downloaded the latest xim update. and he says invalid bilding format
@@Kazah_stream Hey, can you go into the top right options (info/about) and post both firmware versions that it lists you there?
@@XIMCentral firmware version: 7.00.20240219
Manager version: 7.00.20240219
been waiting for this one, will be fun to setup all this🎉🎉🎉
also I dont see myself on the member list at the end
Happy to hear that! 🥳 You are listed on minute 17:00 in the Tier 2 category right at the start! ❤😁
Scummy bait
90% of the people watching this video are on KBM Not a controller
Less than 5% of the community uses a controller, and then you start to understand that this video wasn't from a "Pro" but simply a marketing tactic
Od1n was hoping that when the controller players that Hate Xim users search a video about the Matrix they will find this and be mesmerized 😵
Like WOW look at all this stuff we could possible do!!!!! This config was ass bro, I respect the Marketing tactics tho 😉🤣🤣🤣🤣
The video is from an actual ALGS pro who will attend LAN in January again. And the entire config is what he used to get to LAN. Plus it can be used with a controller too. Simply change the bindings to a controller using modifiers. So i really dont know what you mean.