To cool a room of 100 sq ft ,use 2 aircoolers with peltier cooling the water. All heat in the water is cooled by peltier. No need to open window anymore or install real aircon with compressor.
If I use an evaporator and fan behind it ... like the one used in air conditioners ... and pass water chilleded by pletiers inside the evaporator ... where the temperature of this water reaches -20 degrees Celsius after adding an antifreeze to the water ... Will I get enough coolness to cool a room and how many pletiers do I need to do that?
I Hope You Will Get Coolness .But Cooling A Room Sound Difficult, Say Cooling A Study Table You Can. If You Want It To Be More Effective Try Using Peltier With 15 Amps, Also Supply 12V 15Amps Power Supply ,And Provide A Outlet Fan With Higher RPM Motor (775 Motor) And Also Use A Peltier Kit Heat Sink Instead Of The Processor Fan. Stay Tuned A Peltier Kit Will Be Unboxed Soon!!
I want to ask a question ... If the cooling capacity of one pletier is about 50 watts ( Qmax = 50 watts), which is equivalent to 170 BTU We need about 70 pletier to get 12000 BTU, (12000 BTU = 1 Ton refrigeration) which is the capacity of the air conditioner required to cool a normal room ...so , How efficient is this device in order to cool a room??can it really cool a room??
This Is A Basic AC .Which Is Able To Cool A Small Area Say Your Study Table. Looking To Cool A Room Isn't Possible With This Peltier Module. If At All You Want To Try .You Can Get A Peltier With 15 Amps Which Is More Powerful. But Then When You Build A One With 15A. Make Sure The Hot Air To Move Out.
build a well-insulated 15-liter mini-fridge, then put an 8-10-liter container in the refrigerator and put water in it. If you can keep the air space inside the refrigerator at 4 degrees, then the water will be very cold after a while, the peltier cell will start to freeze due to the water vapor, which it further increases the cooling up to -2 degrees, it is difficult to heat cooled water in a closed space, put a water pump in the tank that transports the cold water to a condenser and you will be able to cool a small room with it! the circulating water will not heat up much at 7-8 degrees during circulation, in order to increase the further cooling performance, at the end of the return pipe, there should be a spiral of copper pipe inside the cooler, which is inside the water, so the heated water will not heat up the previously cooling water
I have used 12V 5 Amps (Bike Battery) To Power Up 8:45 . You Can Also Use ATX (PC Power Supply), But It Must Be At least 12 V 6 Amps Of Current Load ,So That It Can Produce Enough Cooling
@@toppedwithfun please make it bro....I am so suffocating here.....whatever j can't buy AC.,..so please if you make the video I'll make it and somehow I'll be cool.... please bro... understand ❤️....hope you'll understand and make it faster bro ❤️
What Did You Use To Dissipate The Heat ?Processor Cooling Fan ? Try Using This Heat Sink To Dissipate The Heat ruclips.net/video/si7kaQVGl8Y/видео.html And You Have To Use 12 V 6 A Power Supply At least 5 A To Get Cooling
Which wire used?
Can I keep on for full night, or it will blast after some hours
You Power Supply And Peltier Module Might Get Hot.
Which board is used name please
To cool a room of 100 sq ft ,use 2 aircoolers with peltier cooling the water. All heat in the water is cooled by peltier.
No need to open window anymore or install real aircon with compressor.
If I use an evaporator and fan behind it ... like the one used in air conditioners ... and pass water chilleded by pletiers inside the evaporator ... where the temperature of this water reaches -20 degrees Celsius after adding an antifreeze to the water ... Will I get enough coolness to cool a room and how many pletiers do I need to do that?
I Hope You Will Get Coolness .But Cooling A Room Sound Difficult, Say Cooling A Study Table You Can. If You Want It To Be More Effective Try Using Peltier With 15 Amps, Also Supply 12V 15Amps Power Supply ,And Provide A Outlet Fan With Higher RPM Motor (775 Motor) And Also Use A Peltier Kit Heat Sink Instead Of The Processor Fan. Stay Tuned A Peltier Kit Will Be Unboxed Soon!!
I want to ask a question ...
If the cooling capacity of one pletier is about 50 watts ( Qmax = 50 watts), which is equivalent to 170 BTU
We need about 70 pletier to get 12000 BTU, (12000 BTU = 1 Ton refrigeration) which is the capacity of the air conditioner required to cool a normal room ...so , How efficient is this device in order to cool a room??can it really cool a room??
This Is A Basic AC .Which Is Able To Cool A Small Area Say Your Study Table. Looking To Cool A Room Isn't Possible With This Peltier Module. If At All You Want To Try .You Can Get A Peltier With 15 Amps Which Is More Powerful. But Then When You Build A One With 15A. Make Sure The Hot Air To Move Out.
build a well-insulated 15-liter mini-fridge, then put an 8-10-liter container in the refrigerator and put water in it. If you can keep the air space inside the refrigerator at 4 degrees, then the water will be very cold after a while, the peltier cell will start to freeze due to the water vapor, which it further increases the cooling up to -2 degrees, it is difficult to heat cooled water in a closed space, put a water pump in the tank that transports the cold water to a condenser and you will be able to cool a small room with it! the circulating water will not heat up much at 7-8 degrees during circulation, in order to increase the further cooling performance, at the end of the return pipe, there should be a spiral of copper pipe inside the cooler, which is inside the water, so the heated water will not heat up the previously cooling water
Super waiting for next video
How it is powered without battery can it work on PC power box
I have used 12V 5 Amps (Bike Battery) To Power Up 8:45 . You Can Also Use ATX (PC Power Supply), But It Must Be At least 12 V 6 Amps Of Current Load ,So That It Can Produce Enough Cooling
Pc supply is very much powerful dude 😅😅
What is the working volt of this CPU fan
12 V Fan With Less Current Rating.....You Can Also Use Higher Current Rate Fan For More RpM....
Bro....can you please make a video on about how to make an AC which is able to cool the room❤️🙏❤️
Yes Bro Will Do In Future❤️
@@toppedwithfun please make it bro....I am so suffocating here.....whatever j can't buy AC.,..so please if you make the video I'll make it and somehow I'll be cool.... please bro... understand ❤️....hope you'll understand and make it faster bro ❤️
Bhai aapne purchase kha se kiya
Check Out The Description!!
Hot side in same room ??
Yes, But It Is Preferred To Keep The Hot Side Close To A Window So That The Hot Air GOES OUT!!
Hahaha what a 100 IQ
But right 😁
🔥🔥🔥🔥
👏👏👏👏👏👏
Bhai yeh fake hai maine banaya but ye heatsink ko toh cool kar raha hai but cool air nahi aaraha hai only normal air aa raha hai.
What Did You Use To Dissipate The Heat ?Processor Cooling Fan ?
Try Using This Heat Sink To Dissipate The Heat
ruclips.net/video/si7kaQVGl8Y/видео.html
And You Have To Use 12 V 6 A Power Supply At least 5 A To Get Cooling
💯💯💯💯
💯💯💯💯💯
❤❤❤❤
The only thing this is going to do is heat your room up, bc it's gonna be exhausting 120w of heat(equal to 2-3 computers).
What If You Place The Setup In A Place, Say Near Window So That The Hot Air Flows Outside The Room And Obviously The Room Chills !!
Wire kaise connect hogi vo kon btaega
8:15 Connect All The Wires Parallely So That The Voltage Doesn't Drops
Sb kuch bdiya tha lekim wire kse jode wo smaj nhi aya
Connect Every Wires In Parallel Connection i.e Peltier Module, Cooling Fans And Heat Sink Fan
Plzz reply bhai
Check Out The Description!!