That was pretty difficult but seemed to work. Wouldn’t recommend unless you have a couple hours. FYI for my particular iPad the correct file was ota_iPad2,3.Ipsw. My iPad is iPad 2 wifi + cellular. Also there is problem with the routine around the 12 minute mark where you have to go download this file, the file that he has us download at the beginning is incorrect (you will see this as you go through). Overall I’m mad at Apple. I knew immediately when I downloaded iOS 7 that it had slowed my old iPad down so much it was almost unusable. I’m sure Apple did that on purpose so that everyone would be forced to buy a new machine, which I did. They tried to slow down their phones too but got caught. Overall this was good but I would rate it as difficult.
Same here. iOS 7 doesn’t support some older apps, but iOS 6 doesn’t support some newer apps. It’s dumb, but I like the older apps better than the newer.
For some of those who got stuck at Flash: The Phoenix app is a tethered jailbreak and thus needs re-jailbreak every time the system restarts (mine happened when I re-did DFU mode, maybe restarted the ipad instead by accident). Re-jailbreaking, Re-enable KDFUApp, and then Flashing worked for my case.
yo, My iPad keeps failing at this message 19:46:37 iDevice will connect to Recovery Mode automatically (5 minutes in Win7) and then fails by saying jailbreaking of iDevice failed
My iPad gets stuck on a black (but still on) screen, 3uTools stops doing stuff at "Sending iBEC componet" (its green) and I am kinda stuck. Found out the fix, after hours and hours of trying the same thing over and over, the trick is to simply use 3uTools V2.25 that instantly fixed my issue! (I was watching this and 1 hour in (I keep messing up) I noticed we have the same keyboard and same iPad lmao.) (Edit: formatted the text so the important bit is first.)
When I try and confirm the installation for the Kdfu app, it says "the requested modifications cannot be applied due to required dependencies or conflicts that cannot be automatically found or fixed". Any help?
i have a problem with my iPad, i have the same one, but when i try tu enter kDFU, y press the first bottom, and shows me an error "ERROR: No bundle for this divice!", can i do something to fix it?
I did this and after I hit enter KDFU my ipad shut off completely. This might have been a mistake because my power button is not working for some reason. I unplugged the ipad from my computer on accident and now it wont detect the ipad when I plug it back in. so right now my ipad is completely black and non-functional and right now im ordering parts to replace the power button. if there is anything else I can do to fix it just let me know. I tried entering flash on 3utools and it didnt work because it needs to detect the ipad for it to work.
Finally, more people working on legacy iOS devices, awesome work! 😁👍 I had used the beehind tool to downgrade one of my iPad 2's to 6.1.3, but this looks like a much cleaner way of going about things
Did anyone get it??? I downloaded version 2.52 as suggested in the chat and gave an error in “Connecting with restore mode”. Using the current version is in an infinite loop loading the IBCE, any solution please ??
my ipad 2 a1396 cannot be activated and fail the activation process. And in itunes say There is a problem with my IPAD. it always failed. what shall i do? can you help me solve this. will downgrading will solve the issue. thanks for your answers
13 Mar 2022 Just a massive thank you. My old iPad 2 was completely non functional, and now runs like it did when it was new! Just a heads up that (for some reason) I had to get to the Jail Break using 2.58 then had to roll 3u back to 2.52 to run the reflash. Took about 10 attempts but running sweet now!
@@kolya18m the only thing I’d really like now is to put a decent ebook reader on it. Books was not included in native 6.1.3 and App Store doesn’t function any more. I’ve used 3U to jailbreak but can’t find an eBook reader in Cydia How are you getting apps on yours? 😊
@@kolya18m sadly I couldn’t find anything in Cydia either In the end I did manage a workaround. I put “Calibre” on my Mac and saved my books in there. Converted them to PDF and then use the “read in browser” function in Calibre to read them from the iPad in Safari 😊
After trying and trying for 3 hours and getting all the errors loading ibss fail loading ibcc fail , flash fail , the app freezes , the solution is you have to download 3utool version 2.52 and not the above and re do the steps it will work fine
I remember apple supported a lot more A5 devices for ota iOS 6. Now I believe they’re only supporting iPhone 4s and iPad 2. So the only way to get to iOS 6 on something like the iPad 4 is through coolbooter or nightshade possibly idk?
@@Dogedadogoif the Chinese company has less than 4 employees than not. Otherwise it is state owned and has to share all its information to the ccp!!!!!
Wow! Thank you so much! My iPhone 4s is on iOS 6.1.3 now and is running so much smoother and faster now! Also does anyone know how to stop OTA updates without jailbreaking? My iPhone is trying to download iOS 8.4.1 automatically and I’m scared of updating my iPhone by mistake. Would be great if you could make a video on how to do it
this worked only thing id advise is using 3uTool version 2.52 i tried 2.62 and it got stuck on sending ibec i read through the comments and it worked ibec
If you’re on iPad 2,4 or iPad Mini 1, you have to downgrade to ios 8.4.1 then dualboot ios 6 instead. If you’re on any other iPad 2 version, set your version to 6.0 or 6.1.2, then restart, and go to software update, and install the “update”.
i already reset my ipad 2. and erase all password. but when i do jailbreak, the apps ask for apple id and password. even i use my apple id. its not working. can you fix this? i need your help. thankyou
When I go to jailbreak it, it says "Due to driver compatibility issues, the classic device jailbreak tool only supports operations on Windows 7 and Windows XP!" I had to go to jailbreak through the tools tab because from the iDevice tab where you were, there was no "jailbreak now" option next to "no"
If you’re on iPad 2,4 or iPad Mini 1, you have to downgrade to ios 8.4.1 then dualboot ios 6 instead. If you’re on any other iPad 2 version, set your version to 6.0 or 6.1.2, then restart, and go to software update, and install the “update”. If it doesn’t work, try v2.52 instead.
Ah, got it to work! - Two things - use 3uTools version 2.56. Also, when you download the ipsw file, go to the properties of it and tick the 'unprotect' check at the bottom.
i tryed to downgrade a ipad 3 with your last vid and it did not work and when i tryed to restore it back too ios 9 with 3utools it did not work and it went to recovery mode 3utools said and it disconnected and the ipad has a black screen how do i fix :(
hi! can you help me? My software says "my ipad 2 is aready jailbroken" from my previous attempts, but i completly hard reseted my ipad at night, so why did jailbreak not delete? also, i dont see any of the cydia icon or phoenix, and when im trying to instal phoenix, it says "my device is aready jailbroken"
Wow! Thank you so much! My Ipad is running so smooth now! Also, does anyone know how to disable OTA updates without jailbreaking? My ipad is trying to automatically download IOS 8 & I'm scared of updating my ipad by mistake. Also is there any untethered jailbreak for ipad 2,2 ios 6.1.3? Would be great to have a video on how to do it
wouldnt my ipad get activation locked if i downgrade it from 9.3.5 to ios 6? i recently bought this ipad, and it has an apple id in it and it still works like a charm but the thing is the prevous owner's apple id is still logged in, doesnt remember its password.
@@ClockworkingTech I did "erase all settings and data", also tried both, signing in with and without Apple ID at the initial setup, but same result... Without appstore, this downgrade is totally useless :(
on jailbreak it says i need to login with apple id but there isnt one on it, i try to create one and it says cant create apple id at this time so im kind of stuck here
thanks for the tutorial, but now i am angry at myself that i have to do it all over again because of the firmware i even checked it was the right firmware i have a 2.2 and i downloaded 2.2 so idk what went wrong
@@garyww24 you have to check comments too. sometimes video isnt accurate but I got help from comments. from what I'm aware you have to run an older version of 3utools to flash
@@garyww24 for ipad 2,1 I used the latest version of 3utools for the jailbreak. then I used 3utools version 2.52 to flash iOS 6 firmware , overall watch the video if you run into trouble then refer back to this comment
That was pretty difficult but seemed to work. Wouldn’t recommend unless you have a couple hours. FYI for my particular iPad the correct file was ota_iPad2,3.Ipsw. My iPad is iPad 2 wifi + cellular. Also there is problem with the routine around the 12 minute mark where you have to go download this file, the file that he has us download at the beginning is incorrect (you will see this as you go through). Overall I’m mad at Apple. I knew immediately when I downloaded iOS 7 that it had slowed my old iPad down so much it was almost unusable. I’m sure Apple did that on purpose so that everyone would be forced to buy a new machine, which I did. They tried to slow down their phones too but got caught. Overall this was good but I would rate it as difficult.
Same here. iOS 7 doesn’t support some older apps, but iOS 6 doesn’t support some newer apps. It’s dumb, but I like the older apps better than the newer.
never mind, i fixed it. My ipad 2 is not working with the latest version of 3utools, but it worked with v2.52
It works! THX
Thank You!
5:45 you need to unplug the iPad first and then jailbreak. It won’t work if you have it plugged in and you will experience problems.
It keeps saying “flash failed” I’ve tried on both an iPhone 4S and iPad 2. Used two different MacBook Pros both running windows 10 Bootcamp.
For some of those who got stuck at Flash: The Phoenix app is a tethered jailbreak and thus needs re-jailbreak every time the system restarts (mine happened when I re-did DFU mode, maybe restarted the ipad instead by accident). Re-jailbreaking, Re-enable KDFUApp, and then Flashing worked for my case.
You mean untherd
12 14
semi-tethered
Semi-untethered*
(Please pin this) If the apple logo doesnt show up, downgrade to 3utools version 2.55 (if it still doesnt work try 2.52)!
Thank you
how do i downgrade 3utools?
@@kickyouinthegrass4672 you need to uninstall the one you have and download it from the previous versions section
tysm
Mine didn’t show up the apple logo, but downgrading 3uTools to 2.52 worked!
yo, My iPad keeps failing at this message 19:46:37 iDevice will connect to Recovery Mode automatically (5 minutes in Win7) and then fails by saying jailbreaking of iDevice failed
It doesn't work. I did everything in the same way as in the video but got "Loading iBEC component" error. iPad 2 (2,1).
Was the same for me until I downloaded older version of 3u Tools (2.38)
@@ruslanarhip4794 mine got the apple logo on 2.52. It only works in 2.38-2.52.
Works on 3U 2.38 vision, not with 2.58 vision
My iPad gets stuck on a black (but still on) screen, 3uTools stops doing stuff at "Sending iBEC componet" (its green) and I am kinda stuck.
Found out the fix, after hours and hours of trying the same thing over and over, the trick is to simply use 3uTools V2.25 that instantly fixed my issue!
(I was watching this and 1 hour in (I keep messing up) I noticed we have the same keyboard and same iPad lmao.)
(Edit: formatted the text so the important bit is first.)
Thank you so much for the tip! I thought my device was incompatible or something, but ver. 2.25 fixed this iBEC issue instantly :)
Thank you so much it worked !
i was also stuck there. now working properly
Massive thanks bro! ❤
When I try and confirm the installation for the Kdfu app, it says "the requested modifications cannot be applied due to required dependencies or conflicts that cannot be automatically found or fixed". Any help?
Um
Well when I download the kdfu app um I install it then it’s didn’t came up
I had the same - two missing dependencies - 'openssl' and 'curl'
Thank you so much. My little brick is back to life.
i have a problem with my iPad, i have the same one, but when i try tu enter kDFU, y press the first bottom, and shows me an error "ERROR: No bundle for this divice!", can i do something to fix it?
@Saint Luke B Her not yet
This doesn’t work for me instead of going to the Apple logo it just goes on the black screen
Same i don't think its a issue tho mine is still working normally
I noticed if that it doesnt recognize the dfu mode, unplug it once and quickly back in kickstarts it
I did this and after I hit enter KDFU my ipad shut off completely. This might have been a mistake because my power button is not working for some reason. I unplugged the ipad from my computer on accident and now it wont detect the ipad when I plug it back in. so right now my ipad is completely black and non-functional and right now im ordering parts to replace the power button. if there is anything else I can do to fix it just let me know. I tried entering flash on 3utools and it didnt work because it needs to detect the ipad for it to work.
Let the battery die for a while, and then try charging it. I had the same problem and it worked.
Finally, more people working on legacy iOS devices, awesome work! 😁👍 I had used the beehind tool to downgrade one of my iPad 2's to 6.1.3, but this looks like a much cleaner way of going about things
Btw does your data save still or does it reset the iPad once you’ve switch ios
@@snetzgaming It will delete your data. Do backup first.
Did anyone get it??? I downloaded version 2.52 as suggested in the chat and gave an error in “Connecting with restore mode”. Using the current version is in an infinite loop loading the IBCE, any solution please ??
my solution was that I downloaded version 2.36 (and ONLY that wersion) - error disappeared. Try this version.GL
after i click on flash, it brings me to recovery mode, and no apple logo
me too.
me too
@@luizgustavonovaes2022 any fucking answer god pork?
my ipad 2 a1396 cannot be activated and fail the activation process. And in itunes say There is a problem with my IPAD. it always failed. what shall i do? can you help me solve this. will downgrading will solve the issue. thanks for your answers
Maybe it’s activation locked??
13 Mar 2022
Just a massive thank you. My old iPad 2 was completely non functional, and now runs like it did when it was new! Just a heads up that (for some reason) I had to get to the Jail Break using 2.58 then had to roll 3u back to 2.52 to run the reflash. Took about 10 attempts but running sweet now!
Thank you!
@@kolya18m the only thing I’d really like now is to put a decent ebook reader on it. Books was not included in native 6.1.3 and App Store doesn’t function any more.
I’ve used 3U to jailbreak but can’t find an eBook reader in Cydia
How are you getting apps on yours? 😊
@@christophershirley1303 Cydia jailbreak 6.1.3 solve problem
@@kolya18m sadly I couldn’t find anything in Cydia either
In the end I did manage a workaround. I put “Calibre” on my Mac and saved my books in there. Converted them to PDF and then use the “read in browser” function in Calibre to read them from the iPad in Safari 😊
using 2.52 really helped. Thank you!
Hi dude, I was trying to jailbreak my iPad mini 1 running iOS 9.3.5 but when I run kDFUapp it says NO BUNDLE FOUND
Well when I use kdfu app I installed it I didn’t see it home tab
9:24
@@fliobater you know how to fix it?
SAME
Are u using iPad 2,4
17:49/ when is that video coming out???
Can i contact you? I have errors with iBEC components
Howto get shhsihusihhsuuieueghugfduhjdfjnfdgkjdsfnjdfdd
i have repeated this step so many times, but every time i use pro flash, it always gets stuck on Loading RestoreRamDisk
nevermind, just needed an earlier version of 3utools. the 5.2 ver
After trying and trying for 3 hours and getting all the errors loading ibss fail loading ibcc fail , flash fail , the app freezes , the solution is you have to download 3utool version 2.52 and not the above and re do the steps it will work fine
as from what i remember it works in 2.55 for me actually
Lemmi see the if I can find something to help you
You need a old version of 3u tools I found one from the 4s tortorial
@@Clark124 thats what i said
You are the man! man, I have iPad 2,2 and flashing was always giving Ibcc error so I did it with 3utools 2.52 and it workerd.
Thanks
can u do it but for a ipad 3 plz
I think you can do same
3uTools : Loading RestoreRamdisk
How to solve it?
Older version of 3utools
Thanks for the tutorial. It's surprising that this downgrade method still works, even after over 10 years.
would this still work even though fmi is turned on?
Haven’t tried this yet, but when I get my iPad 2, I’m gonna try this. Hope it works!
I remember apple supported a lot more A5 devices for ota iOS 6. Now I believe they’re only supporting iPhone 4s and iPad 2. So the only way to get to iOS 6 on something like the iPad 4 is through coolbooter or nightshade possibly idk?
Question I was in the jailbreak process but it failed why? I had apps on the thing so is that the problem?
U got A1395 model there?
Yes, I still have it!
Could you make this for a Mac please
i always get an error "failed flash" help
it broke when it was installing and it won't turn on anymore😪😵
Thanks it works! but the tihmstar repo is now down, and you have to install it using the .deb files.
Please tell me on how you can do it on windows!
ruclips.net/video/oU_NTP6KGjQ/видео.html I use this tutorial, this is not my video
@@Cheng_130 I finally got my iPad back to its original speed.
@@OfficialNoob94 it actually worked for you too?
@@Cheng_130 yes
Can you do that with iPad mini 1?
Hello, what to do if during the flash my 3u got crashed ? And my Ipad 2 couldn’t turn on anymore ?
plug the ipad in the computer and hold the power and home button until your computer makes a noise
@Johnson C Try restoring iOS 9.3.5 using iTunes then redo the steps to install iOS 6.
@@staticgamer8612 if the power button doesn't work...
Wait for the battery to die and then plug your ipad.
When I go into kDFUApp on my iPad it says no bundle for this device
give it a sec
It's not showing me copy to clipboard
Well when I use kdfu app I installed it I didn’t see it home tab
Hi @Kevan can I use this method for my iPad 3,1? Does the OTA need to be signed? Please respond thx!
Source not available on my cydia
Careful 3uTools is known to be pretty sketchy software, made in China rings some major alarm bells.
Just because a software is made in China doesn't mean its malicious
@@Dogedadogoif the Chinese company has less than 4 employees than not. Otherwise it is state owned and has to share all its information to the ccp!!!!!
@@rc-wingman5719 guys you use outdated apple devices on ios 6. It's easy to hack even without any Chineese software. Keep it cold
Be careful! I tried it in a VM, when i was done my Laptop BSODd (Natively) and i couldnt make a Backup in my native os and Had to Reinstall Windows.
is jailbreaking compulsory?
This still works? (Im going to buy an ipad 2 in 3 days i wanto do this and play)
Doesn’t work on mid 2012 iPad 2
which one
@ there is only one 2012 iPad 2
@@newsuperbowserworld im pretty sure that ones mid 2012
@mangomanyuh probably that one. iPad 2,4
Wow! Thank you so much! My iPhone 4s is on iOS 6.1.3 now and is running so much smoother and faster now! Also does anyone know how to stop OTA updates without jailbreaking? My iPhone is trying to download iOS 8.4.1 automatically and I’m scared of updating my iPhone by mistake. Would be great if you could make a video on how to do it
this worked only thing id advise is using 3uTool version 2.52 i tried 2.62 and it got stuck on sending ibec i read through the comments and it worked ibec
I get to put an apple id, which I don't have, and I can't create one either, can I use those apple ids that are on the web for free
i get no bundle for this device
Will this work with a 1st generation iPad mini? Same specs as iPad 2.
@@kwebbytakeflight what about 3rd iPad?
if the device had a version below ios 6 then it will most likely work
If you’re on iPad 2,4 or iPad Mini 1, you have to downgrade to ios 8.4.1 then dualboot ios 6 instead.
If you’re on any other iPad 2 version, set your version to 6.0 or 6.1.2, then restart, and go to software update, and install the “update”.
i already reset my ipad 2. and erase all password. but when i do jailbreak, the apps ask for apple id and password. even i use my apple id. its not working. can you fix this? i need your help. thankyou
How can I turn off the update in ios 6?
its stuck at loading restore RamDisk
help
When I go to jailbreak it, it says "Due to driver compatibility issues, the classic device jailbreak tool only supports operations on Windows 7 and Windows XP!" I had to go to jailbreak through the tools tab because from the iDevice tab where you were, there was no "jailbreak now" option next to "no"
If you’re on iPad 2,4 or iPad Mini 1, you have to downgrade to ios 8.4.1 then dualboot ios 6 instead.
If you’re on any other iPad 2 version, set your version to 6.0 or 6.1.2, then restart, and go to software update, and install the “update”.
If it doesn’t work, try v2.52 instead.
will this work with a icloud blocked ios 9.3.5
Ah, got it to work! - Two things - use 3uTools version 2.56. Also, when you download the ipsw file, go to the properties of it and tick the 'unprotect' check at the bottom.
THANK YOU SO MUCH I WAS HAVING ISSUES AND THAT SOLVED IT!
@@user-ji1xu6pq6q i keep stuck on shsh, it wont connect, how can i resolve this? also i can't restore it with itunes
@@nefarionefarius9386 did you jailbreak your device?
@@user-ji1xu6pq6q yeahhh, is it a problem?
@@nefarionefarius9386 nah but did u download the ipsw in the description
Is activate now will be click?
i have an ipad with ios 8.4 and already jailbroken, do i have to upgrade it to 9.3.5 before doing the kdfu stuffs?
try to see if you can jailbreak iOS 8.4
@@thedood7966 already jailbroken
If you can get the kDFU app on iOS 8.4, you should be able to still downgrade using the exact same steps.
@@SDW4938 refer to his recent comment my guy
i tryed to downgrade a ipad 3 with your last vid and it did not work and when i tryed to restore it back too ios 9 with 3utools it did not work and it went to recovery mode 3utools said and it disconnected and the ipad has a black screen how do i fix :(
So if the iPad Is in recovery mode plug it into to iTunes and select update and restore
@@Kevan929 the pc does not see it and it has a black screen
@@sodorfootage so I'd would try leaving it plugged in to PC for a couple hours
@@Kevan929 heyyyy it died yay
@Estanislao yeah I loved to, sorry it has been a while just been backed with my job and school I will start working on the vid right away
This worked Thank you so much My iPad 2 feels new again thanks bro
Doesn't work for me, gets stuck sending iBEC component
Try version 2.5.2 or earlier, this will work.
Thanks a bunch, your me, and my iPad here because you saved him from getting recycled! IOS 6 lasts forever!
ipad2.4 not work
Oh
You have to downgrade to ios 8.4.1 then dualboot ios 6.
It says "the request timed out", is the dowgrade already not working anymore??
same issue here
i guess the server is down
Looks like we have to stick on downgrading to iOS 8.
the rpot link is gone, is there any opther way?
hi! can you help me? My software says "my ipad 2 is aready jailbroken" from my previous attempts, but i completly hard reseted my ipad at night, so why did jailbreak not delete? also, i dont see any of the cydia icon or phoenix, and when im trying to instal phoenix, it says "my device is aready jailbroken"
You have to restore it, then jailbreak it. You cannot delete a jailbreak by hard resetting the device though settings.
@@TNTMusic5757 i know, i already fixed
Wow! Thank you so much! My Ipad is running so smooth now! Also, does anyone know how to disable OTA updates without jailbreaking? My ipad is trying to automatically download IOS 8 & I'm scared of updating my ipad by mistake. Also is there any untethered jailbreak for ipad 2,2 ios 6.1.3? Would be great to have a video on how to do it
Is this permanent?
Would this process work with iPad 4 (Cellular+ Wifi) ?
yes
@@ClockworkingTech How? please write here a guide. The iPad 4 was my first iPad.
wouldnt my ipad get activation locked if i downgrade it from 9.3.5 to ios 6? i recently bought this ipad, and it has an apple id in it and it still works like a charm but the thing is the prevous owner's apple id is still logged in, doesnt remember its password.
Try skipping the internet connection thing, this should work.
@@OfficialNoob94 Actually, for some reason, it is drilled into your system. EVEN if there is no internet.
Technically, no. But you should be wary of it since I think 6.1.3 has it.
@@Awesome_neos145 oh, i forgot
@@Awesome_neos145 i got the activation lock screen a few months ago and its a good thing i remembered my apple id password
Thank you so much all the other youtube vids didnt work on my ipad
It’s called Bootcamp it only runs on Intel Max though
Version 2.56 worked for me.
I did tried to Downgrade the iPhone 4s and iPad 2 to iOS 6 But it was having a lot of crashing and screwed up
i cant find jailbreak
In cydia nothing pops up even after I re open
I managed to downgrade my ipad 2, but appstore won't work for some reason. Any idea how to fix that please?
factory reset it
@@ClockworkingTech I did "erase all settings and data", also tried both, signing in with and without Apple ID at the initial setup, but same result... Without appstore, this downgrade is totally useless :(
@@mrmartinbusek I’m sorry I couldn’t help my iPad 2 bricked itself and I don’t have a mac
nice! i found a random ipad 2 in my drawers today and now i can do it!
did it work
@@Windows7fan yea
on jailbreak it says i need to login with apple id but there isnt one on it, i try to create one and it says cant create apple id at this time so im kind of stuck here
Is jailbreak required?
Yes,basically just set the version to 6.0.1 or 6.1.2, restart, then go to software update i think and it should say “6.1.3”
Sadly I Have An iPad Mid 2012
Does it work with iPad 2,2?
Yes, perfectly. I have the same iPad model under iOS 6.1.3 🙂
@@plangh nice
Does it work on 2,4???
iOS 6 isn’t signed for the 2,4 for some reason
and ibbs flash failed
can this be used to downgrade ipad 3?
So yes it can but you will need the its OTA file
@@Kevan929 where can i find one?
@@nick90s10 on the same website, just select ipad 3....
@@edgeous909 but he say that it wrong at 11:54
@@nick90s10 oh ye, i was wrong.
Does my device have to be jailbroken?
Yes
KDFU app doesn’t open
run jailbreak again
thanks for the tutorial, but now i am angry at myself that i have to do it all over again because of the firmware i even checked it was the right firmware i have a 2.2 and i downloaded 2.2 so idk what went wrong
my hero...even with the hiccup... thank you
It isn’t required u just put it in dfu
Can you downgrade iphone 4 from ios 9 to ios 6 ?
iOS 9 does not exist on iPhone 4
thx bro! jailbreak took long cuz im in an icloud family and I needed to create a new one but still very usefull tuturial thx!
What about iPad 3?
Btw does your data save still or does it reset the iPad once you’ve switch ios
@@snetzgamingresets
This Jailbreak method doesn’t work anymore I tried 3utools and sideloadly
I tried it and it worked for me 🤨
@@thedood7966 just tried using 3utools again still didn’t work
@@garyww24 you have to check comments too. sometimes video isnt accurate but I got help from comments. from what I'm aware you have to run an older version of 3utools to flash
@@thedood7966 what version did u use? I just tried 3utools version 2.57 still failed to install phoenix
@@garyww24 for ipad 2,1 I used the latest version of 3utools for the jailbreak. then I used 3utools version 2.52 to flash iOS 6 firmware , overall watch the video if you run into trouble then refer back to this comment
can anyone help me for ipad2.4?😅
Idk
is it ok ?
Downgrade to 8.4.1 instead and then dualboot ios 6
@@Palkia8-Bit bruh why???
@@m3e642 thats the closest thing I can think of. Or you can somehow bypass the lock on the OS version with jailbreak.