Gorgeous! Kind of makes you wonder how those kids over in China can make these so cheaply doesn't it? All joking aside, you have an interesting selection of tools.. Why would you choose to use a tiny little drill press over your big one? How hard was it to get that acorn nut on the bottom with those buggered threads? Also, you are putting a lot of sideways force on your big drill press when you were sanding that. If that press has a tapered spindle, you may be really surprise one day when the chuck falls right out of it while it's running.
Your handle looks great and turned perfectly, but the weight of the maul is not enough. I have similar Al- Stohlman maul, which is expensive to buy from the shop. I had it before my lathe. Later bought another one made in China with a hardwood handle. Looks great, but not enough wait to work with thick leather, but that one is weighted maul. You should put inside the plastic some heavy Iron or brass bar for weight. I bought the Chinese one because making a new one the same cost and more work.
Wow impressive and great video. It really looks better than those Tandy Leather stuff. Where did you get your parts from and how much does it weigh? Great video
Thank you! The weight is exactly 350 grams (is a small one) the parts... well I already had the rod, leather and steel. Only had to buy the UHMW plastic in a local warehouse, they sell various metals, plastics and construction stuff (It's called randrade).
Good work overall...metal washers are too big for the shown plastic striking surface on this given maul head. The metal disc should have either been undersized by 10 mm to 15 mm or the plastic maul head made larger...
What a great video. Turning semi-ugly pieces into a beautiful, functional tool. Handle shape has always fascinated me. How does one determine the correct shape of any tool's handle. I see that your thumb rests on the flaring at the top of the maul. Does it work? Thanks again.
Thank you! I'm glad that people enjoy the videos. As for the handle well...I searched for the top brands of mauls in order to get a general shape and dimensions, then I opted for a size smaller than large (because I have medium to small hands) and determined the final shape by "feeling it" in the hand. I have to say it feels very confortable and have two grabbing positions, the one with the thumb at the top when I do precision "taps" and another grabbing by the end of the handle when you need more power. Both positions feel very natural in hand.
@@aikabacrafttools9129 I know for sure we have those washers at Home Depot and Lowes, don't know if you have those stores where you're at. Still you did a great job, lots of time and effort. Thanks.
This was VERY WELL done. Absolute pleasure to watch.
Thank you!
That isn't merely a maul, it's a work of ART!...Beautiful.....
Thank you very much!
Beautiful work!
Great video!! We started making one the other day while I am on vacation and will finish it up when I get back to the shop.
Thank you! And have fun with it.
Watched the whole thing. That was awesome!
Thank you!
Amazing look! Your skills are impressive. Thanks for sharing!
Thank you!
Nicely done!
What is the machine at 3:40 with the black arms that is holding the leather down?
Love that rounding jig
Thank you! simple solutions are usually the best solutions.
A beautiful maul. Im interested in knowing where you aquiered the nylon / teflon billet?
Thank you! I bought it on a warehouse called "randrade" here in Galicia (Spain) (They sell steel, iron, brass, aluminum, UHMW, etc).
Wonderful! Thanks for the vid.
Thank you
Nicely done.
Thank you
Outstanding!!
Thank you!
how can a belt grinder eat steel so fast ?? I was amazed when you made the square piece round
I think a high speed on the belt is a mayor factor when you want to eat steel quickly, mine goes about 30 m/s and that really helps.
@@aikabacrafttools9129 That's very impressive !
It also helps to use 30-60 grit belt when removing the bulk of steel. I am in intermediate knife smith, and I have two 2 x 72 belt grinders
Gorgeous! Kind of makes you wonder how those kids over in China can make these so cheaply doesn't it? All joking aside, you have an interesting selection of tools.. Why would you choose to use a tiny little drill press over your big one? How hard was it to get that acorn nut on the bottom with those buggered threads? Also, you are putting a lot of sideways force on your big drill press when you were sanding that. If that press has a tapered spindle, you may be really surprise one day when the chuck falls right out of it while it's running.
I made with 3" nylon rod, but with wooden handle. I also made the same mistake, a Dom Nut in top 😥😥😥without it could keep mawl standalone.
Would love to try this.....where did you find the “washers” on either side of cylinder?
he made them out of steel. watch the full video its pictured
@@donkeywhistler .....thanks, Kevin.
Your handle looks great and turned perfectly, but the weight of the maul is not enough. I have similar Al- Stohlman maul, which is expensive to buy from the shop. I had it before my lathe. Later bought another one made in China with a hardwood handle. Looks great, but not enough wait to work with thick leather, but that one is weighted maul. You should put inside the plastic some heavy Iron or brass bar for weight. I bought the Chinese one because making a new one the same cost and more work.
I agree that it strugle with thick leather, but the UHMW is actually quite heavy and I find it perfect for more detailed work.
hermoso!
Gracias!
What diameter threaded rod and UMHW rod are you using?
The threaded ros is metric M12, the UMHW... actually I don't remember jaja, but I think it's about 5 centimeters.
@@aikabacrafttools9129 thanks for the reply!
Wow impressive and great video. It really looks better than those Tandy Leather stuff. Where did you get your parts from and how much does it weigh?
Great video
Thank you! The weight is exactly 350 grams (is a small one) the parts... well I already had the rod, leather and steel. Only had to buy the UHMW plastic in a local warehouse, they sell various metals, plastics and construction stuff (It's called randrade).
Got it thank you
Thanks to you!
Are you using epoxy for the glueing part?
No, it's wood glue, works really well with leather.
con que material pegaste el cuero
Cola blanca normal, va muy bien con el cuero.
Good work overall...metal washers are too big for the shown plastic striking surface on this given maul head. The metal disc should have either been undersized by 10 mm to 15 mm or the plastic maul head made larger...
do you still make these?
I only did this one actually, but I'll probably make more once I have a lathe, because it's really versatile.
What a great video. Turning semi-ugly pieces into a beautiful, functional tool. Handle shape has always fascinated me. How does one determine the correct shape of any tool's handle. I see that your thumb rests on the flaring at the top of the maul. Does it work? Thanks again.
Thank you! I'm glad that people enjoy the videos.
As for the handle well...I searched for the top brands of mauls in order to get a general shape and dimensions, then I opted for a size smaller than large (because I have medium to small hands) and determined the final shape by "feeling it" in the hand. I have to say it feels very confortable and have two grabbing positions, the one with the thumb at the top when I do precision "taps" and another grabbing by the end of the handle when you need more power. Both positions feel very natural in hand.
This was a good videotape on how to make an item
Thank you!
Thought handle was made by wood all the time cant bielive its leather
Carnaúba is originally from Brazil, a symbol of the state of Ceará
Thank you, everyday we learn something new.
You could have used big washers instead of that plate.
It would have been really dificult to find washers that big here (even more of the right size).
@@aikabacrafttools9129 I know for sure we have those washers at Home Depot and Lowes, don't know if you have those stores where you're at. Still you did a great job, lots of time and effort. Thanks.
DÖner Kebab! 5:02
I made with 3" nylon rod, but with wooden handle. I also made the same mistake, a Dom Nut in top 😥😥😥without it could keep mawl standalone.