I have a 67 c10 i lowered with shorter springs n aluminum blocks n newer trailing arms , i found out i needed a new adjustable pan bar .then i found i needed to square my deferential , yup it was almost half inch out of square.i had to loosen every bolt holding to the rear the put ratchet straps on opposite sides of rear front to back measure ten times tighten n re check ten more times n wala dune .God bless yall real good.
hey guy Im in SASKATOON, contemplating buying a running driving C20, 1968 camper special BIGGEST PROBLEM is it has 4.56 reargears and will barely do a 100km/h cuz its screaming at about 4000rpm SO far amigos the biggest wrecker nearby has nothing that will bolt in Got any ideas what will fit and where i can get one with 3.08-3.73 ish gears?
Crazy coincidence.. I’m putting a CPP deluxe pan hard bar in my 63 c10 that has a 66 rear end.. doesn’t fit.. looks like I need to move the frame mount like you did because of binding. Also feel like it’s way too long. Great video! would be great to connect since it seems like we’re fighting the same demons!
Great video. I hope you get it going quickly!
I have a 67 c10 i lowered with shorter springs n aluminum blocks n newer trailing arms , i found out i needed a new adjustable pan bar .then i found i needed to square my deferential , yup it was almost half inch out of square.i had to loosen every bolt holding to the rear the put ratchet straps on opposite sides of rear front to back measure ten times tighten n re check ten more times n wala dune .God bless yall real good.
Sounded like a middle eastern conflict. Lmfao.
Subscribed. 😂
Keep us updated I gotta 66 I’m working on
Great info, alot of these after market companies give bogas info and don't know %×_@
hey guy Im in SASKATOON, contemplating buying a running driving C20, 1968 camper special
BIGGEST PROBLEM is it has 4.56 reargears and will barely do a 100km/h cuz its screaming at about 4000rpm
SO far amigos the biggest wrecker nearby has nothing that will bolt in
Got any ideas what will fit and where i can get one with 3.08-3.73 ish gears?
Crazy coincidence.. I’m putting a CPP deluxe pan hard bar in my 63 c10 that has a 66 rear end.. doesn’t fit.. looks like I need to move the frame mount like you did because of binding. Also feel like it’s way too long. Great video! would be great to connect since it seems like we’re fighting the same demons!
Im glad it helped man! Thanks for checking out the channel.
Feel free to contact me on Instagram or Facebook also
I love these
Time for me to do some spirit driving
Swedish nut lathe. 😂😂
Can't find 17 spline because dint make..if you 17 must be rare . I never saw one an I rebuild rear.s. even part.s book don't say anything about 17
i assure you. they exist. google it.