Did the jet kit, air box mod and the delkelvic 8 inch full exhaust system, and man I love the sound of the exhaust, I left baffle in. Bike puts out way more power. Thanks for the vid man
I love the thumpers, everything is so easy to work on compared to 30 mins just pulling off fairings from multi cylinder road bikes. Great vids, it’s akin to being with a friend and getting stuff done. 👍
We may or may not have the same drz400sm build 🤣 Thanks for all the easy to follow great content. Just did the flush mount turn signals and fender eliminator
@@MJFUYT thanks for watching! The. Ike has morphed a ton since this video. Including the exhaust. Running a full barker’s system now. Although more pricey, quality is much higher. Thanks for the sub!
This is a really good video for installing an exhaust. I used it for my Yoshimura RS2 install, since the process is very similar. The one thing I would add to this in my case is the there is not enough space on the head holt to use an allen socket. To get it aligned, you will have to use a regular allen key that is long enough. Moving the clamp on the other side is a must and super easy.
You’re funny man, glad I stayed to watch the bloopers. Awesome sounding exhaust made here in Australia. I'm about to buy the same colour bike with same exhaust. Will check now for how you got an LED headlight in yours. Thanks again.
Hell yea! Thanks for watching. Stay tuned for 3x3 mod, JD jet kit for the carb, and Zeta rubber killers. Should be getting parts in the mail soon. Thanks for watching!
Had an xt250 with the same exhaust and the bike sounded amazing just didn’t go anywhere when you went wide open. I just bought a drz so I’m excited for the sound again but this time to actually have speed to match the sound😂
Hey man just got around to ordering the exhaust and putting it on and it’s amazing. This bike is so much rowdier than that xt was and sounds even better
Nice videos man. I just picked up my bike today. Exact same one. Unfortunately it looks like Delkevic is all out of stock with this. Hopefully they restock soon. Your bike looks awesome 👍🏼
I’ve owned some pretty loud bikes but I bought that kit and I can genuinely say it’s loud loud, will drown most other bikes with some obvious exceptions 😅(ie trapped out 450s, screaming 2 strokes that’s about it)
Hey man! How was the bike running with the exaust on before you put on the jet kit? Just brought the same exaust for my stock DRZ and I dont know if im ready to do the jetting job now since im not too good at mecanic. Could running the full exaust without rejetting be bad for the engine or have other downsides on the long term?
Hey man! I'm seeing mixed reviews about the jetting I just bought this same exhaust, what jet do you recommend switching to an is it safe to run it temporarily on the stock jets without it glowing orange? Thanks
I called JD Jetting bc I’m about to install the jet kit and this exact exhaust and they recommended that I use the 160 main jet and just remove the snorkel instead of the 170 and cutting the 3x3 mod. Just wondering what you did with this exhaust and how it turned out? I’d rather not have to do this twice. Thanks!
@@phistry810 I got rid of this exhaust. It’s basically the same size as stock. I’d follow JDs advice. Unless you’re going to get a barkers or an MRD exhaust. If so, I’d 3x3 and use a 170.
@@linksgarage1985 So I spoke with them again and they’re not familiar with the Delkavic but said if I went with the Yoshi, then I should do the 3x3 with the 170. Do you think the Yoshi would push that much more air or maybe he’s just not familiar with Delkavic?
@ id get a barkers performance system. It flows way more. I weigh them, and measure them on my channel. Search and you’ll find it. The barkers is wayyyyy more quality of a system.
Just put the same pipe on, have gold ash levers, have the led, have the gold handlebar bracket, have the same brake cables but gold. I have commented on a couple videos and I really appreciate your guidance. I am wanting to know if I can run the exhaust and 3by3 without the jd jet kit until it arrives. It won’t be here till Monday and I drive it to work so the ole lady can have the car for the kids. Delkavic says you do not need to rejet with any of there exhausts on there website. Will it hurt the bike at all? I’d say 20 miles a day until Monday.
Nope. Won’t hurt it. It’ll be a little lean. But no harm will be done. People slap on these exhaust and never rejet for thousands of miles. You’ll be good. The internal diameter of this system is barely bigger than stock. The Barkers system however, is wayy bigger. And thanks for the kind words man. Here to help!
Hey man what’s the size of the Allen keys used for the exhaust header bolt and stud? My 6mm Allen fits one, but not the other. Thanks bro! 2022 DRZ400SM here
Have you noticed a significant difference in performance after all of the mods? I have the jd jet kit coming And I really want that exhaust looks awesome but unfortunately they’re out of stock so I’m not going to jet it until I get the exhaust.
@@linksgarage1985 do you have a vid on removing that valve? Not 100% on what that is. My mid pipe from delkevic welds snapped… hopefully they’ll honor it and replace the pipe
I have the exact same bike bother and just used your video as a guide earlier today to put on my tst eliminator. thinking about what exhaust to put on it. you think the Delkavic is to loud?
Hey link, hope you are doing great man! On the website of the exhaust I see it says mini 8” is it still the same as the one you have, by the pic on the website it looks just like yours
Have seen others recommend wiping the pipes down with mineral spirits or similar degreaser to avoid oil from hand/finger prints from burning into the new SS, any issues ?
Could you tell me where you ordered it from and how much it was? I just bought a 2019 DRZ but I don't care for the aftermarket exhaust the previous owner installed.
Does jet kit need to be installed or adjusted for this pipe system? Already have a jet kit done and do the factory blinkers need to be changed out so dont melt lol?
If you add a pipe I would recommend a jet kit. But you already have one. And your OEM blinkers might be in danger ⚠️! Lol. TST industries has a good fender eliminator kit. I have a video of that, and all if there modification installs on the channel. Thanks for watching!
I have a buddy that is going to the US in a couple of days, and I ordered the same exhaust from my drz to the hotel that he is staying in how long do you estimate it to arrive?
Tried putting mine on today but it seems like the mounts for the stock heat shield are too close together and I can’t see any obvious way to get more play or space between? Did you or anyone else have these issues? What am I doing wrong lol
@@theyhatejay7653 2024, I think I have the slip joint to far in? But I really don’t understand because it has a fixed mounted point on the rear, and then a fixed mounting point in the front “engine” so there isn’t really any wiggle room? lol certainly not an inch
hey picking up new 2022 drz400sm and want to replace the exhaust what do you suggest either jetting the stock carb or getting the new fcr39 clone carb or is it ok if i replace the exhaust and not do the jetting ??
That exhaust looks so much better but I want a quiet bike so I have to keep stock unfortunately. Just a heads up, those passenger pegs weight a good 2 lbs just dead weight for most people. Your videography have definitely improved since this one btw.
@@repetitivemotion I’ve since swapped. But all the weight differences are talked about here. ruclips.net/video/6Yn6pgnxNsU/видео.htmlsi=8pFapKcLcpsDeEfg
That exhaust looked sweet and sounds amazing was debating about even buying this bike just for stunts and after hearing that it's a must have purchase with that exhaust! Question your headlight looks brighter than my friends how did you get that brightness and color??? Also noticed the smaller front piece above the front tire where'd you get that and do they make it in white?
Jet it. Or else it won’t perform great. And knowing what I know now, I wouldn’t even buy this exhaust. I cheaped out. And bought a budget system. Only to redo it with a quality system. Wish I would have just “buy once, and cried once”
Since I did it it’s been raining. I’ve only ridden it about 15 miles or so. With the baffle out, it’s pretty damn loud. Not as bad with the baffle in. I’d say the quality was above what I expected. And I’m pretty picky. Thanks for watching I appreciate it!
@@tylerburtch3234 a few other videos on the channel already. Fender eliminator, signals, etc. more to come. 3x3 airbox mod, and a JD carb jet kit coming soon.
@@z000t4d I tried. But it was hard as hell to film man. We will see how it turns out. I didn’t film the carb removal / install. Strictly the jetting procedure.
Hell yea man. I used to get a ton of messages asking me if I had enough flags. I would say “nope. I’ve got more now!” And I do. The place is full of them. This was a while back. Got a different exhaust system now. If you’re interested, search the channel. Or I can send you the link. This system was in for me in the beginning. But I upgraded. If I had it to do all over again, I would have spent a little more upfront. Live and learn. Thanks for watching. I appreciate it.
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
Did the jet kit, air box mod and the delkelvic 8 inch full exhaust system, and man I love the sound of the exhaust, I left baffle in. Bike puts out way more power. Thanks for the vid man
For sure! Glad to help! I ride mine with the baffle in also. Still love it
I love the thumpers, everything is so easy to work on compared to 30 mins just pulling off fairings from multi cylinder road bikes. Great vids, it’s akin to being with a friend and getting stuff done. 👍
Thank you!! I appreciate it! And yes, very simple to work on!
Thanks man!!! Just picked up my 2022 Today! Was looking for someone with mods and came across your page!!! Love them!!! 🔥🔥🔥
Heck yea! Congrats on the purchase!
We may or may not have the same drz400sm build 🤣
Thanks for all the easy to follow great content.
Just did the flush mount turn signals and fender eliminator
Awesome! More videos to come! People seem to like the DRZ stuff.
Your follower from Saudi Arabia. Thank you. I benefited a lot and I own a 2023 DR400sm ✌️
Thank you!! Greetings from USA! Thank you for watching. Let me know if you ever need help!
First-time viewer here. Great content and commentary. That exhaust sounds sick AF! Thx for sharing your knowledge. Like & subscribed.
@@MJFUYT thanks for watching! The. Ike has morphed a ton since this video. Including the exhaust. Running a full barker’s system now. Although more pricey, quality is much higher. Thanks for the sub!
This is a really good video for installing an exhaust. I used it for my Yoshimura RS2 install, since the process is very similar. The one thing I would add to this in my case is the there is not enough space on the head holt to use an allen socket. To get it aligned, you will have to use a regular allen key that is long enough. Moving the clamp on the other side is a must and super easy.
I love DRZ-400 SM ❤
@@BacBaPhi007 thank you!
You’re funny man, glad I stayed to watch the bloopers.
Awesome sounding exhaust made here in Australia.
I'm about to buy the same colour bike with same exhaust.
Will check now for how you got an LED headlight in yours. Thanks again.
its made in the UK
Thank you!
Did mine today, thanks to your video. Sounds really good
Very welcome
Just ordered after this video can’t wait to get it in!!!
I’m still loving it! Thanks for watching I appreciate it!
Oh, and I look for your videos first for mod info. Good work!
Thank you!
Got the same one you have couple weeks ago will be following closely as you mod
Hell yea! Thanks for watching.
Stay tuned for 3x3 mod, JD jet kit for the carb, and Zeta rubber killers. Should be getting parts in the mail soon. Thanks for watching!
No problem
Had an xt250 with the same exhaust and the bike sounded amazing just didn’t go anywhere when you went wide open. I just bought a drz so I’m excited for the sound again but this time to actually have speed to match the sound😂
Congrats on the new bike!
Hey man just got around to ordering the exhaust and putting it on and it’s amazing. This bike is so much rowdier than that xt was and sounds even better
Great vidéos!! DRZS RULE!!
Thank you!
Looking to get this for my first mod on my 2020 drz. Sounds awesome
Thanks man. It’s very surprising the quality level. I’m a very particular person. And the quality exceeded my expectations.
Could you make a video taking out the carb and putting it back in?
@@Jidder lots of good videos out there. I have no plans on removing the carb anytime soon. But if I do, I’ll film it!
Looks really good!
Thank you
Nice videos man. I just picked up my bike today. Exact same one. Unfortunately it looks like Delkevic is all out of stock with this. Hopefully they restock soon. Your bike looks awesome 👍🏼
Thanks man. Congrats on the new bike. I have about 35 other DRZ vids on the channel for ya!
I’ve owned some pretty loud bikes but I bought that kit and I can genuinely say it’s loud loud, will drown most other bikes with some obvious exceptions 😅(ie trapped out 450s, screaming 2 strokes that’s about it)
@@AlexBoucher-s8k pretty loud for sure
Nicee man, just ordered mine from the dealership it’s my 3rd drz haha
Hell yea!!!!!!!! Thanks for Watching. More videos to come.
Hey man! How was the bike running with the exaust on before you put on the jet kit? Just brought the same exaust for my stock DRZ and I dont know if im ready to do the jetting job now since im not too good at mecanic. Could running the full exaust without rejetting be bad for the engine or have other downsides on the long term?
I pretty much did it all at the same time. But the bike was pretty lean after the exhaust and no jetting. Lots of popping on deceleration.
Hey Link, so how did you use their bolts, and washers? They sent no instructions and it’s starting to become a headache.
Yes. I used all the hardware they provided.
@@linksgarage1985 ok did that help the fitting better? I can’t seem to find and instructions on how the hardware goes on anywhere
@@jameslarson9260 not sure what ones you are having trouble with. Just a couple clamps, the head pipe and the rubber strap.
How much bigger is front pipe than factory
@@jamesmunroe8714 not sure
Link was wondering how much bigger aftermarket head pipe was than factory for jetting purposes
This one is barely larger. My barkers system is way bigger
Hey man! I'm seeing mixed reviews about the jetting I just bought this same exhaust, what jet do you recommend switching to an is it safe to run it temporarily on the stock jets without it glowing orange? Thanks
I called JD Jetting bc I’m about to install the jet kit and this exact exhaust and they recommended that I use the 160 main jet and just remove the snorkel instead of the 170 and cutting the 3x3 mod. Just wondering what you did with this exhaust and how it turned out? I’d rather not have to do this twice. Thanks!
@@phistry810 I got rid of this exhaust. It’s basically the same size as stock. I’d follow JDs advice. Unless you’re going to get a barkers or an MRD exhaust. If so, I’d 3x3 and use a 170.
@ Thank you!
@ very welcome
@@linksgarage1985 So I spoke with them again and they’re not familiar with the Delkavic but said if I went with the Yoshi, then I should do the 3x3 with the 170. Do you think the Yoshi would push that much more air or maybe he’s just not familiar with Delkavic?
@ id get a barkers performance system. It flows way more. I weigh them, and measure them on my channel. Search and you’ll find it. The barkers is wayyyyy more quality of a system.
Just put the same pipe on, have gold ash levers, have the led, have the gold handlebar bracket, have the same brake cables but gold. I have commented on a couple videos and I really appreciate your guidance. I am wanting to know if I can run the exhaust and 3by3 without the jd jet kit until it arrives. It won’t be here till Monday and I drive it to work so the ole lady can have the car for the kids. Delkavic says you do not need to rejet with any of there exhausts on there website. Will it hurt the bike at all? I’d say 20 miles a day until Monday.
I have the delkavic on. Full system, same as you.
Nope. Won’t hurt it. It’ll be a little lean. But no harm will be done. People slap on these exhaust and never rejet for thousands of miles. You’ll be good. The internal diameter of this system is barely bigger than stock. The Barkers system however, is wayy bigger. And thanks for the kind words man. Here to help!
Your head was in the way, how did you tighten the right header bolt?
What’s going on my guy, question did you have a problem with the tip of the faring touching the muffler itself?
Negative. All fit nice
Hey man what’s the size of the Allen keys used for the exhaust header bolt and stud? My 6mm Allen fits one, but not the other. Thanks bro! 2022 DRZ400SM here
Damn! I thought I used a 6 for both. And congrats on the new ride! Lots of new videos coming soon.
How is the exhaust holding up after use? Any issues? And do you recall if the header pipe has a larger ID than stock??
Holding up great after over 4K miles. And I believe the ID was larger
Have you noticed a significant difference in performance after all of the mods? I have the jd jet kit coming And I really want that exhaust looks awesome but unfortunately they’re out of stock so I’m not going to jet it until I get the exhaust.
Yea. It’s pretty noticeable with the jet, exhaust, and 3x3.
I know you changed up exhausted but what jets do I use from the jd jet kit?
Have you seen the jetting video?
Does you get crazy backfiring with this exhaust on down shift, or letting off of throttle?
A little. Removed PAIR valve. Helped tremendously.
@@linksgarage1985 do you have a vid on removing that valve? Not 100% on what that is. My mid pipe from delkevic welds snapped… hopefully they’ll honor it and replace the pipe
@@jameslarson9260 ruclips.net/video/csx5GS5UHAA/видео.html
Hey I just bought this exhaust for my drz just wanted to ask if you kept the baffle out or did you end up putting it in?
Put it in. Sounds much cleaner
I have the exact same bike bother and just used your video as a guide earlier today to put on my tst eliminator. thinking about what exhaust to put on it. you think the Delkavic is to loud?
It’s pretty loud. But I put the baffle back in and I’ve been running it that way for about 3k miles. I love it still.
Love the content brother. Got the same bike and opt for the 13" tri-oval doing a lot of same mods. Thanks for the easy to follow guides.
Heck yea!!!! Man, all the love you guys are shooting my way is cool as hell. Hope some of this helps! I appreciate you watching. More to come!
How do you like the 13” how has it held up
@@abstractcleaning it's been good had to replace the pipe scrap other than that it's been one of my best purchases for the bike .
Hey link, hope you are doing great man! On the website of the exhaust I see it says mini 8” is it still the same as the one you have, by the pic on the website it looks just like yours
Yes sir! 8 inch is what I have! And thanks for watching.
great vid! did you put the exhaust on before the jet kit? if yes did it run ok?
I only rode it about 10 miles that way. Then jetted. And 3x3. It’s got an FCR 39 now. Lots of vids on it all.
You are so about to make me sell my ‘05 SV650 and go to DRZ, this bike takes me back to highschool hooligan days🥲
Do it! Many more videos coming soon! I appreciate you watching! 💪🏼
Have seen others recommend wiping the pipes down with mineral spirits or similar degreaser to avoid oil from hand/finger prints from burning into the new SS, any issues ?
I’d recommend alcohol. But I’ve had no issues.
Could you tell me where you ordered it from and how much it was? I just bought a 2019 DRZ but I don't care for the aftermarket exhaust the previous owner installed.
The link to purchase is in the description box. Best of luck. And thanks for watching!
Does jet kit need to be installed or adjusted for this pipe system? Already have a jet kit done and do the factory blinkers need to be changed out so dont melt lol?
If you add a pipe I would recommend a jet kit. But you already have one. And your OEM blinkers might be in danger ⚠️! Lol. TST industries has a good fender eliminator kit. I have a video of that, and all if there modification installs on the channel. Thanks for watching!
The gold look that it took on after riding looks awesome man, was that just natural progression from heat ?
Yep. And you can hit it with a 0000 steel wool pad and it’ll come right back to shiny stainless. Easy peasy
I have a buddy that is going to the US in a couple of days, and I ordered the same exhaust from my drz to the hotel that he is staying
in how long do you estimate it to arrive?
Depends on where you get it from. I ordered mine in Amazon and I got it in a few days.
Do you know if this exhaust will fit on the 2023 model?
Yes it will
Tried putting mine on today but it seems like the mounts for the stock heat shield are too close together and I can’t see any obvious way to get more play or space between? Did you or anyone else have these issues? What am I doing wrong lol
@@JohnWeitl when I had this exhaust, I didn’t have any issues like that. Sorry dude. Not sure how to help
What year bike do you have
@@theyhatejay7653 2024, I think I have the slip joint to far in? But I really don’t understand because it has a fixed mounted point on the rear, and then a fixed mounting point in the front “engine” so there isn’t really any wiggle room? lol certainly not an inch
@@theyhatejay7653 22
hey picking up new 2022 drz400sm and want to replace the exhaust what do you suggest either jetting the stock carb or getting the new fcr39 clone carb or is it ok if i replace the exhaust and not do the jetting ??
I’d jet it.
I would not add exhaust unless you jet it.
I would do jet kit, 3x3 airbox mod and exhaust all at the same time
@@linksgarage1985 thankyou
That exhaust looks so much better but I want a quiet bike so I have to keep stock unfortunately. Just a heads up, those passenger pegs weight a good 2 lbs just dead weight for most people.
Your videography have definitely improved since this one btw.
Thank you
How much weight did you lose with this swap?
@@repetitivemotion I’ve since swapped. But all the weight differences are talked about here. ruclips.net/video/6Yn6pgnxNsU/видео.htmlsi=8pFapKcLcpsDeEfg
Noice 👍🏼🤠🇨🇦 load pipes save lives 👍🏼
Is this the mini 8inc or 14inc?
8inch
Thanks!
That exhaust looked sweet and sounds amazing was debating about even buying this bike just for stunts and after hearing that it's a must have purchase with that exhaust! Question your headlight looks brighter than my friends how did you get that brightness and color??? Also noticed the smaller front piece above the front tire where'd you get that and do they make it in white?
Headlight. ruclips.net/video/lk4DCO4tAw4/видео.html
Fender. ruclips.net/video/YqkO4LD7fz0/видео.html
Thanks for watching. About 900 miles on it with the exhaust. Love it. And I’ll have a new headlight video Saturday hopefully. Completely new style!
Is the header diameter on these delkevics even any bigger than stock?
Barely.
bro please make more video of the exhaut sound i like it , i think i going to buy one
Coming soon!
Sounds sick 😷
Thanks man! Sounds great in person. Rode about 500 miles with it so far and I’m still impressed.
I have to do the jet ski or I can leave it only with the exhaust ?
Jet it. Or else it won’t perform great. And knowing what I know now, I wouldn’t even buy this exhaust. I cheaped out. And bought a budget system. Only to redo it with a quality system. Wish I would have just “buy once, and cried once”
@@linksgarage1985 I just bought it 🥲😂 but thank you !
@@toxictptoppowe4139 don’t be sad. Toss in a jet kit and do a 3x3. You’ll be happy. I have both videos of you need them
@@linksgarage1985 what filter you recommend?
@@toxictptoppowe4139 I run a k&n
Hi bro ! Greet from Malaysia ! I wish i get one of this bike at my place . And u just got a new subscriber! Please do upload more of your bike
Greetings from USA! Thank you for watching! And I have about 30 videos of this bike on my channel.
I think showing some riding and fly by's so we can judge the sound would have been nice
Tons of vids on the channel with the sound now. I’ll be sure to film some fly by’s just for you! 💪🏼
Do you feel like it's to Loud when driving around? I'm looking at getting one.
Since I did it it’s been raining. I’ve only ridden it about 15 miles or so. With the baffle out, it’s pretty damn loud. Not as bad with the baffle in. I’d say the quality was above what I expected. And I’m pretty picky. Thanks for watching I appreciate it!
@@linksgarage1985 thanks for responding back. Hope you make some more videos about your bike.
@@tylerburtch3234 a few other videos on the channel already. Fender eliminator, signals, etc. more to come. 3x3 airbox mod, and a JD carb jet kit coming soon.
I rode it quite a bit today. Without the baffle it’s pretty damn loud. But It sounds good in my opinion.
@@linksgarage1985 do you need ear plugs to ride it, is it really that loud.
Hearing damage is no joke , I'm thinking of buying
McDonald's Drive through, April 2nd, 9:02 pm EST. Subject bought 1 bag of food and 3 drinks. Subject seems to enjoy Punisher.
I have no idea what this means. But the punisher is cool. 💪🏼
No jetting adjustments?
Video coming soon! It’s jetted. And 3x3 airbox mod
@@linksgarage1985 I saw the clue in the next video! Thanks. You might actually make the best jetting video for this bike judging by the quality.
@@z000t4d I tried. But it was hard as hell to film man. We will see how it turns out. I didn’t film the carb removal / install. Strictly the jetting procedure.
Here ya go. ruclips.net/video/GknR8d5DDmM/видео.html
Watching this since I couldn't find a dr650 vid. Does this need repacking? I can't find any info
how much was it?
Link in description
I like that bike too. But I don't have the money to buy that bike🥺
One day!
Deathly not stealthy
No idea what this means. But that a for watching!
No one is talking about all the American flags hung up. 🫡 I salute you sir
Hell yea man. I used to get a ton of messages asking me if I had enough flags. I would say “nope. I’ve got more now!” And I do. The place is full of them. This was a while back. Got a different exhaust system now. If you’re interested, search the channel. Or I can send you the link. This system was in for me in the beginning. But I upgraded. If I had it to do all over again, I would have spent a little more upfront. Live and learn. Thanks for watching. I appreciate it.
@@linksgarage1985yea bro send me the link!