Sorry i actually do have a video on the eye lids Installing Carbon Fiber Headlight EYELIDS, LED EMBLEM, and M STYLE MIRROR CAPS with SEQUENTIAL LED! ruclips.net/video/JU-YFPGuV9c/видео.html
My dissuer only lights up and flashes when I press on the break, is there something i did wrong with the wiring? And is it suppose to keep flashing when at a complete stop?
Where did you get rear deck lid spoiler, the front lower bumper spoiler, the rocker panel extensions, and the rear kanards you had to trim? Also is the front grill black or carbon fiber! How did you do the chrome delete around the windows? Where did you get the rear CF Infiniti logo? Are you going to get rid of the chrome on the trunk lid near the license plate?
Everything on the car is carbon, most of my parts i hot off amazon others on ebay but make sure they are real carbon. Here is link to chrome delete and trunk chrome trim is covered by carbon molding Infiniti Q50 Window Chrome Delete With Vinyl Wrap ruclips.net/video/9yFeN4GPNWU/видео.html
Hey brother clean install!! Sorry if this is a dumb question but do we need to use backing washers for the rivets when using the Tibet gun to lock in the diffuser in the bottom?? Thanks
Thanks bro! No such thing as a dumb question, no you dont need a washer When this type of rivet is squeezed it creates anchors on the back side which holds it really good in place I hope i explained it well
@@El_Ceza sounds great im excited to install this bad boy on my q50 I will use your video as a reference thank you so much for the info bro!!! Hope you keep making videos! Blessings brother 🙏
I finally installed. I was worried about the wiring but those posi helped a lot thanks again
Nice! Nothing to it with the positaps
Makes life easier!
No problem
@@El_Ceza you don’t cut anytbing with them? and these are 22 gague wires?
No cutting involved, link on description to the posi taps
@@El_Ceza thanks man you cool for that
@@thatjitkai5821 no problem
Yo buddy I like the diffuser , I recently got my install, using your method thank you once again 👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼
Nice!!! Im sure it looks really nice bro!
Did mine with green to blue no red and black to black for press on light only. Thanks for the help!
👍🏻
So the top side is just the tape ? Rivet only under side because I didn’t want to drill into the face of the bumper
About to install my diffuser tomorrow on a 19 Q50😁
Do you have a video of the carbon fiber eye lids
Sorry i actually do have a video on the eye lids
Installing Carbon Fiber Headlight EYELIDS, LED EMBLEM, and M STYLE MIRROR CAPS with SEQUENTIAL LED!
ruclips.net/video/JU-YFPGuV9c/видео.html
Are you drilling the holes into the car?
yes
Did wiring same procedure but the third brake does a not light up only when I hit the brakes got the same diffuser from southbay
Leave black wire as it is and swith the other two wires
@@El_Ceza thanks, I’ll try that!
No problem
Great video 💪🏼
Thanks bro!
There’s two reds. Which one help?
Connect each to power wire and try it if not just swap wires
Can I ask the name of the tool you were using the push the screw in under the vehicle????
Rivet gun
@@El_Ceza thanks
Do you need to disconnect battery for wire work?
No, as long as the car is off
i ordered the one from the link with the light and there’s no wire
They should replace it
@@El_Ceza they said it was just a reflector
@noahsananikone3818 www.amazon.com/dp/B09M5WWCPC/ref=cm_sw_r_as_gl_api_gl_i_13KMKDAGHYVR49A9NR9Y?linkCode=ml2&tag=cesarjimene08-20
@@El_Ceza thanks fam
@@noahsananikone3818 no problem
My dissuer only lights up and flashes when I press on the break, is there something i did wrong with the wiring? And is it suppose to keep flashing when at a complete stop?
Thats how it goes
@@El_Ceza no like the light doesn’t turn on at all unless I hit the break
@fatedriano6411 has to also turn on when headlights are on and blinks when you hit the brakes
Y’all payin South Bay autowerks 400 for a diffuser and they get it from the same place Amazon does 😂
Shit we broke out here what’s that Amazon link
amzn.to/3HzOzuW
Alibaba got em for 250 real cabron too
Link
Amazon is selling the fake Carbon one with the tow hook cover cut out that’s not the same one as this
Genius asf ❤️
🙏🏼
Thanks 🙏🏼
Is there any way to wire it to just flash when braking and not light up when the lights are on?
Only use brake wire and ground
What size posi tape?
amzn.to/3O0pHPt
Is the link you left in the description for 2018 and up only or does it fit 2014-2017
Shows on the link
Hey bro can you use the Rivets for a front lip like using 3M tape as well?
Yes sir
I use those rivets for everything
Thank you bro I appreciate it … also did you have to unplug the battery when you wired the diffuser ?
@@angeltenorio9849 no problem
I didnt as long as car is off and key fob isnt messed with you good
Got it thnx bro
Where’d u get the emblem overlay from
southbayautoworkz.com/products/q50-14-carbon-fiber-overlay
I just installed mine and when I hold on the brakes it never stops flashing. Is it supposed to be this way?
Yes
Does it every time brakes are pressed
How is it holding up a year later?
No issues
Nice Where did you get the rear emblem cover?
southbayautoworkz.com/products/q50-14-carbon-fiber-overlay
Where did you get rear deck lid spoiler, the front lower bumper spoiler, the rocker panel extensions, and the rear kanards you had to trim? Also is the front grill black or carbon fiber! How did you do the chrome delete around the windows? Where did you get the rear CF Infiniti logo? Are you going to get rid of the chrome on the trunk lid near the license plate?
Everything on the car is carbon, most of my parts i hot off amazon others on ebay but make sure they are real carbon. Here is link to chrome delete and trunk chrome trim is covered by carbon molding
Infiniti Q50 Window Chrome Delete With Vinyl Wrap
ruclips.net/video/9yFeN4GPNWU/видео.html
@@El_Ceza in the description it says hydro dipped carbon, where is the real carbon fiber at ?
@@rigovillagrana7882 www.amazon.com/dp/B09M5WWCPC/ref=cm_sw_r_as_gl_api_gl_i_13KMKDAGHYVR49A9NR9Y?linkCode=ml2&tag=cesarjimene08-20
If don’t feel comfortable installing it by ur self where would you go to get an installation?
If you are in Houston, I can install it for you. If not, then I would look for a body shop.
Thanks for the positap this is my first time hearing about it. So you got a size 20-22 and attach to the brake light ?
Yes sir
@@El_Ceza thanks I’m going to order
@@citgotv1885 no problem
Where did you get this diffuser? I have a 2016 Q and want the same one
amzn.to/3HzOzuW
does it ever stop flashing while holding the brake ?
Stays on til you release the brakes
Bro my I can’t hear the video!!! What size bit and whats the tool u used in the video
5/32
Rivet sqeezer
I have 2 reds which one is it
Youre going to have to try each one
So it's OK for 2015 Q50 model?
Yes sir
@@El_Ceza appreciate !
No problem
How do I wire to not flash?
It has a module integrated for the flashing you would have to bypass it
Link for the 3m tape? I bought some but it wasnt sticky at all
Ill post it on description also
amzn.to/3RYapvN
@@El_Ceza thanks bro!
@@edgargutierrez2334 of course!
Great video bro 🫡
🙏🏼
Yo bro I have a questions what the thing called that you put in the diffuser
Rivets?
What exhaust do you have on the Q?
Oem
What is that tool?
amzn.to/3Vjn2DK
Where u got the emblem cover from
southbayautoworkz.com/products/q50-14-carbon-fiber-overlay
Will this fit on a 2021 q50
Amazon verifies
Link on description
Where did you get that tool with the red handles ?
I purchased it in a Matco truck, but you can find it on amazon or any tool store it is called a Rivet Gun
Thanks
No problem bro
hey bro question, the one you linked in your description says that it doesn’t include an LED light. did you link the right one?
Good catch my mistake
Here is correct link
amzn.to/3kzKi1P
@@El_Ceza goat 🐐
bro i literally found my twin no way you got a q50 and a c6 too
Hey brother clean install!! Sorry if this is a dumb question but do we need to use backing washers for the rivets when using the Tibet gun to lock in the diffuser in the bottom?? Thanks
Thanks bro! No such thing as a dumb question, no you dont need a washer
When this type of rivet is squeezed it creates anchors on the back side which holds it really good in place
I hope i explained it well
@@El_Ceza sounds great im excited to install this bad boy on my q50 I will use your video as a reference thank you so much for the info bro!!! Hope you keep making videos! Blessings brother 🙏
@@El_ACZINO you will love the end result!
I really appreciate the support, happy holidays brother
@@El_Ceza happy holidays to you and your family🙏🙏
Thank you!
Nice whip! Hey where did you get the carbon fiber rear and front emblems.
Thanks bro, Southbay and socal
If I just use 3m tape should I be good? I don’t have a rivet gun. Any alternatives?
You could but I wouldnt trust it
Will this fit on 2015 q50
Should
@@El_Ceza cuz it said 18,19,20 on the Amazon link
Perfect video.
🙏🏼
My led light keeps flashing when I brake and stop… what did I do wrong ??
Thats how it is, nothing wrong
Mine keeps flashing while I’m driving idk if it’s supposed to do that
@@litcodiene875 its wired to wrong wire
@@El_Ceza ok thank you
No problem
Yo where you get those emblems from
www.socalqparts.com/products/rear-carbon-fiber-over-lay
Where did you get the black logo?👍👍
Socal.com
@@El_Ceza are you sure thiss the right link bc it shows some visitor travel guide lol
Socalqparts.com
My mistake
what ga posi taps does this need?
Link is on description
@@El_Ceza yes but what gauge wire is it?
20
@@El_Ceza you’re the best
😅
im getting the same things except I have a question, do you need to use pop rivets or is it not needed?
You don’t need to, but it’s the best thing you can use
i have two red wires and u have one?
Yes
Sorry man if this is a stupid question but what tool is that 3:47 i was looking to buy this diffuser and want to clip it in like you did
No such thing, its a rivet gun you can find it at any auto parts or tool store even Amazon
@@El_Ceza thank you
Yes sir!
Does it have to be a specific gauge for the posi taps
20-22
What brand is this diffuser?
Doesnt say what brand it is
Can’t wait to throw mine on next week!
It changes up the car completely!
It totally does bro I love it ! Great mod to do
Wat tool is that?
Rivet gun you can find at any auto parts store
@el ceza where did you get the duck bill spoiler ??
amzn.to/3XOK854
Link to front lip @ el_ceza
How To Install Carbon Fiber Front Lip and Rear Spoiler on Infiniti Q50 Red Sport 400
ruclips.net/video/D6-sKoBwdXQ/видео.html
Link in description
I get mines from eBay real carbon fiber for like $130
👌🏻
@@El_Cezacan’t wait to install mines today by your video. Thanks man
@@powerdyd4276 👌🏻👌🏻👌🏻
@@El_Ceza5:43 what are they called? Pozze tabs?
@powerdyd4276 posi taps
amzn.to/3txRlfL
Nice cut G
🙏🏼
Does it matter what color you attach the wires too?
Yes
Looking sweet bro,
I got the same rear diffuser on my 2019 I also cut the side splat 🔥🔥🔥🔥🔥👍👍👍
Haha, thought it was going to look bad at first but came out looking good/clean luckily lol
@@El_Ceza looks great the only thing I don’t have is the diffuser for the sides yet .
@@reynaldorivera743 got ya, just a matter of time lol
What’s the link ?!
@@Deadmatt777 southbayautoworkz.com
Is there any gaps with the diffuser?
There is on the sides only, small gap carbon parts are not always perfect fit
Oh ok thanks man
Sure thing!
Where you get this diffuser is this 2018 +
2017 im not sure if they are the same
🤠👍
There 2 red wires 🤦♂️
Verify with multimeter
@@El_Cezawdym by this having trouble as I type this
Check volts out if the 2 wires