How-To Fill a Precharged Airgun - Airgun Bootcamp
HTML-код
- Опубликовано: 6 окт 2024
- In our Airgun Bootcamp series, we take a look at some airgunning basics and attempt to give answers, tips and instructions. In this video we are looking at how-to refill a precharged pneumatic airgun.
Stay tuned for more great Airgun Bootcamp videos!
straight and to the point. Thank you for your time and video
That was a very well done video, I appreciate your offering great information at no cost to us. That is so generous. Thank you.
Also Chris, talk about the dead head plug for those who do not have the tank pressure gauge. With the dead head plug you can charge the line and the big fill reg will tell you what u gots left in the tank. Good vid my friend.
Would like to see videos on cleaning. I've heard it's important where you get your bottles filled do to moisture, is one pave better than another? Dive shop, passing ball, etc.
When filling a tank at home you use a filter or two between the compressor and tank both portable tank like here in video or tank on the gun. I didn’t fill any bottles at scuba shops because I was denied the service for not having an up to date scuba license so I just purchased the yong heng compressor there like 240$ from Walmart who exclusively sales them plus 40$ for a 3 -4 yr warranty after watching some RUclips videos using high grade oil other then one simple O ring change it’s been awesome for my needs no trips no hassle are they open how’s Traffic it’s paid for itself after a few of those headaches plus gas prices in Southern California suck But scuba shops have to be using a filter of some sort because obviously people are breathing off the tanks. I’ve never had any issues with tons of water being in my filters and I check them after each fill and leave them open for a few hours just in case of any moisture. There’s many compressors that look like the yung heng that might work but from my research you want to make sure you get a real one because that’s the one tons of people are using in the pcp world.
@@caseG80 you don't get the water from the compressor and no matter what filter you use it prolly won't stop it.. Its usually always caused by condensation from temp differences in the air and bottle..
Excellent explanation - Thank you
Great video and explaining
Hi, thank you for the info, great video, small question i have is how should you keep a tank if you dont use it for a couple months, should you keep it empty of is it fine if it has some pressure or even if it is full? thank you and keep up the good work
Great, thanks for the information ... when can I have a gun like that
Excellent presentation in all respects, thank you!
Question: I've read that if the rifle has been de-gassed, before adding air, one must cock the gun, receiver open, to allow an air valve to close, so as not to lose air as you try to pump it in. Something that relates to the hammer spring/hammer tension - would you please clarify that?
So I have a question to that question. What do people mean by cocked am I supposed to do just the backstroke or back and forth I don't want to break this thing and all I have is a hand pump.
Thank you you explain perfect How fill My Tank
No problem!
Excellent video thanks. Please do a video explaining the regulator, how does it work, how to set it for different purposes. It will be very useful for us newcomers on pcps. My rifle FX Dreamline Power Pup, 25 cal.
From Costa Rica, thanks again.
The regulator should not be touched to much,it could damage the seal from the dreamline.
It maintain a constant speed of the pellets to increase the presicion.
Also it limits the Pressure for the high speed valve,to high pressure can damage it also or the hammer cant open it anymore.
Low Regulator Pressure = Slow Pellets but more Shots per bottle fill.
The Air consuption is not linear, so double pressure is not double Speed or Energy.
Thank you for your response, very useful. I’ll leave the regulator alone.
Very helpful and CLEAR. Thank you AoA!!
I know it's 3 years old, but when you said both gauges will go up the same time, i would have added the reason why. What you are doing is opening a low pressure tank to a high pressure tank, so that both tanks will arrive at the same pressure, or attempt to do so. If you have a 5k tank and another tank that can get up to 5k, fully opening the valve will make them both equal, sharing the pressure and thus both be less than 5k, maybe 2.5k each if they are the exact same, with some slop in the line, not sure on the math. So yes, you are stopping the equalizing process midstream by shutting the valve at the 250 bar point since big tank can overpressure the little tank. I point that out because the gauge jumped up pretty fast, even when you were trying to ease it into 250.
Hey Chris my Hw45 on target 🎯 at 25 yards this morning 😎👍🏻
AOA a solid company, a pleasure to deal with.
Nice job Chris....
Great video thanks!
Excellent information
Very good information 👍
When filling a PCP rifle air cylinder (or any air cylinder) the proper fill rate is vital to the safety of the operator and equipment. According to FAMA Body Subcommittee, "The fill station will usually (but not always) have an Air Control Panel to control
the cylinder fill rate which should not exceed 1,500 psi per minute or 113 BAR per minute (which is the
highest rate recommended by the major SCBA cylinder manufacturers). Sure, you can slam it in faster, but it's not advisable.
Do you mean the big portable air tank or the air tank inside the gun ?
It would almost be impssibile to fill the rifle tank that slow.
Informative video 👍🏽👍🏽
What is the liquid in the bottle display ?
Thanks
Manufacturers normally use glycerine. It's quite thick, and thus keeps the needle from sudden movements and "bouncing".
Hope this helps.
Are there cases of explosions 💥 from overfilling? Even damages?
Thanks for a nice aducation!
If I shoot the overfilling air without pellets, wouldnt it damage in internal of the gun?
How many fills from what size tank, ans what size reservoir on your gun?
Great vid rookies like me. Thanks!
Found out, by trial and error, my Brocock air rifle needs to be uncocked to stay filled with air. If I cock it before filling, the air will leak out. This is not stated in the Brocock manual that came with either of my Brocock air guns. I think that this kind of information should be included in all air gun manuals and any video on filling your air gun.
I am Oldfashioned ,break barrel and tin of Lead .177 or .22.None of that complicated conundrum.Pellet pouch you can make it yourself and it looks better...
I don’t know if there’s a big price difference, but should you avoid getting a stage three hand pump as compared to a four stage hand pump?
Great video thank you! What's the minimum the tank lay have before we need to refill? I have fx impact m3
Congratulations on the explanation. When we have a full review of Delta Wolf. Thank you and Merry Christmas
Thank you. It is on the short list of to-do's!
Well explained
What do you suggest for a compressor? I’m in the market for my first FX gun. I do have a dive shop right down the street but it seems like the tank is almost $800 and it seems like compressors are a lot cheaper and if the dive tank goes out of business, I am screwed so I think I’d like to get a compressor. What would you suggest. Great video. Thank you so much.
Fred
How long you refill the big tank you have at home? Because takes mind forever that scared me that will explode if the meter is not working
What's the best deal on a Compressor, thinking of getting a gun but would want my own Compressor.
can you make a video or direct me to one that you have made of what exactly we need to use the tank on the rifle such, size, name, of every component that we need to buy and different connector to the rifle i seen some with a small compressor connection on it.
Excelent
Thank you
Most welcome
How many fill do you get from that tank filling that gun
I have a couple of filters between my compressor and my tank, should we have one from the tank to the rifle.
Usually don’t see them being used
Yes
Great video. I have a Weirauch HW44 pcp . You mentioned in your video that the diving cylinder pressure should be equal to the gun tank pressure. I find that on filling the cylinder pressure reaches the prescribed max fill pressure and leaves the pistol gauge short ie 200 to 170. Is this normal? Should I use the pistol gauge and fill to its max prescribed pressure? Thank you
Hi, thank you for yor video. I use a compressor to fill the pcp but in the end when I try to bleed the line if I do it slowly the rifle's valve won't shut. If I do it rapidly the check valve of the compressor goes bad. What can I do to prevent this? Thank you.
My Sig Virtus has a tank that can only be filled to 3000. Should I only have the scba tank pressurized to 3k or should i go to max and get some kind of regulator?
Thenks very much Sir
Que arma linda e bem projetada!
Thank you.
How to fill the air in Sam Yang 44 caliber super gun ?
Hi and thanks. So my new Hatsan Invadre was shipped to me and with a notice that it had 0 pressure in the tank. How long can one be stored at no pressure before damming it?
Hey you got a link to a good buddy bottle
All in one
Tank and fill station
I have an fx impact with a 480 bottle my reg pressure is at 135 bar so with said how many fill can I get all the way to 250 with 78 cf fill tank before I have to fill the tank back up
I have the same set up on my FX Crown MK ll 25 cal. Reg.135 shooting JSB 25.39 at 910 FPS my tank is 74 cf I tested it and got 8 fills. I drained my gun down from 250 to 150 bar I’m getting 112 shots per 100 bar. The gauge on my gun is off by 10 bar so I go by my big tank gauge it’s correct. Hope this helps from Florida
Thanks don it really helps
Hey how many shots do u get on your crown full 250 bar fill cus I’m getting 47 shots on my impact idk if it has to be with the temperature cus it’s in the low 34
I only shoot down from 250 to 150 you don’t want to shoot below your reg pressure 135 not good for the gun
@@modestogutierrez2904 what caliber is your gun? That will make a difference also
Hello, can you share or demonstrate how to use a regulating device that will keep air to you gun constant? Thank you.
thanks
Hi
I've one question
Can we use Nitrogen for filling pcp?
Or we have to use only compressed air
Yes...
And it's better than atmospheric air, cause it has low or nothing humidity. 👍🏻
Nice
Sir tell more about loding air in tank please
👍👍👍
i have a 60lb compressor but im having trouble filling my gun up is it too weak?
Hi, do you have a link for the tank with gauges? Thanks!
hello, what do you recommend in terms of accuracy and strength between .. air arms s410 carbine or condor 24 both 5.5 thank you anyicipat
Greit video
Hi
After building Two filling stations, id like to ask a technical question regarding
filling of a PCP rifle.
I can fill my rifle with
my Nomad II compressor and foot pump no problem but when i go to use my newly built filling station tanks , my rifle will not begin to fill. When i open the valve on my filling station the air is leaving it down the air filling line. The filling stations are rated at
3000 ps (207 Bar). My Rifle will take up to 3000 psi. Is a pressure valve not opening
on the rifle because of not enough back pressure? Do i need to have a tank with a higher pressure?
Hope you can help ,cheers Red
does the air need to be filtered?
these carbon tanks are suitable up to 4500psi, but to what maximum pressure have they been tested?
are these as safe as an aluminum tank or safer would you please clarify that?
Certified pressure vessels are normally able to withstand twice their rated pressure as a minimum.
Hope this helps.
what pressure does the tank explode?
I bought that same fill bottle from AOA. I like the cover carry case on yours. Does AOA sell them and have any in stock?
Yes. www.airgunsofarizona.com/shooting-gear/primal-gun-gear-tank-tote/
What is that bottle and how many fills can you get off it? Dies it come with thumbwheel bleed valve?
Here in Florida, the law now says that dive shops cannot fill your scuba tank to ANY pressure, unless you possess a PADI (dive) certification. I could not get my tank filled yesterday.
Yep ran into this problem in Southern California as well
I had my tank filled today in south Florida at a dive shop. The owner says that he has a lot of PCP customers, including a customer who hunts invasive Iguanas every day! No PADI certificate of Dunkin Donuts discount coupon needed. He only checked the inspection date on the tank. I think that your scuba guy just wants you to pay for expensive diving lessons, to get your PADI certificate.
Why don't you RESEARCH the Florida laws???
@@usernamemykel Your guy is an outlaw, so that’s a good thing for you. I simply found a gun shop that fills scuba tanks and they don’t care.
Please state the law so we can all become educated.
FYI- The 2021 Florida Statutes Title XXIX Chapter 381, 381.895 "Standards for compressed air used for recreational diving" has
1. No mention of compressed air use by persons engaged in activities other than recreational diving and
2. Makes no mention of any requirement for any purchaser of compressed air to have a PADI certificate.
Now show to me, specifically what "law" you are referring to, please.
So if I don't have a carbon fiber tank I can't use a compressor to fill up my gun
You'll still be able to use a PCP compressor for aluminum bottle, more airgunner just prefer carbon bottle because it's lighter and upgrades to bigger bottles to hold more air equals to more shot's. Kinda like the umarex gauntlet 2 it's got a heavy aluminum bottle so we'll upgrade it to keep the weight down
What gun is that in the demo?
Cool
I have a 3000 psi max tank and I can only get 2200 psi in my pcp rifle..
Is it a good idea to leave the tank on the air gun at pressure?
Yes it's best to leave the tank on leave the gun under pressure , it keeps the seals tight
Even pump guns they recommend putting 2 or 3 pumps in it for same reason
@@bertbccfu9564 thanks for the info. I’ve been leaving mine under pressure just because I wasn’t sure. Haha
What psi is being used per shot? And how much is possible?
Every single airgun is different. And some low power models use almost none, while some big bores use all they have on board!
@@airgunsofarizona I was seeking a rational average.
Can you fill a pcp bullpup with out a bottle an just of a compressor
Yes
How many times can I fill my guns 300 bar tank with a Scott scba tank at 300 bar? Thanks
Try out our Tank Fill Calculator.
www.airgunsofarizona.com/Tanks/FillCalc.html
Thx
👍👍👍👍mantap.. 😘 😘
can one use a tank for medical air from a welding shop
No most are not rated for 3000 PSI, and for sure do not use oxygen it will definitely cause an explosion
@@bertbccfu9564 I use medical air for my plasma which is rated for 85 psi . But yea you would have to be extra cautions and god help your neighborhood if you fill it with oxygen . I was just asking since I have lots of it thank you scuba tanks seem tiny
👌👌👌
Will a120 lb air compressor fill the pcp?
Not even close
No, but it'll fill your bicycle tires, football, beachball, basketball, even inflate balloons, but not prices.
Ok got the rifle over filled shot it out got it lowered will not air back up but guage is still up to what pressure is left now what ???? Air will not go into gun guage busted?
Can i fill our PCP airgun over 200 bar, my gun gage is showing 300 bar.
It's not what gauge goes up to you have to go by the manufacturers stated max psi
What happens if you don't bleed the line??
You will have very serious injuries.
You could be seriously injured. That's 3000psig.
Why have you not said whether to cock rifle before filling from a tank
i like so much your unit, but i can't afford sir......
Well save your money till you can afford my friend.
👏👌👍😍❤️
Nice video, but if you're using one of the manual pumps to fill your air shooter, you can bet your ass that you'd never be able to put that gauge in the red even if you had arms like a gorilla and pumped all week....
Pumps are better for cylinder models rather than large bottle guns. But with a properly balanced pump like the Hill you can get it to full either way. Not effortless, but no gorilla required!
This is all nice and dandy but its too many numbers to shoot a gun
or get a dead head. for your tank.
It will not take air
Doesnt dry firing hurt the gun
Hey you got a link to a good buddy bottle like in the video
All in one
Tank and fill station please