Just bought 2 ganzo g732. i am also the owner of an endura 2 (aus8) that i have been carrying for more than 10 years... But i have to face the truth. the ganzo g732 is absolutely fabulous. the two i just received are flawless. perfect early lockup. perfect centered blade. razor sharp out of the box and when i say razor sharp they are absolutely razor sharp. the pins are lock tights (torx6 and torx8). the liner are thick and solid. the g10 handles are thick but with soft texture. when i inspected them i was laughing so hard that my wife asked me why. i told her that these fucking chinese are awesome. this g732 is a beauty. just ordered 2 more. the g732 box is nice too and silice gel inside to fight rust. for 15usd? are you fucking kidding me! lol
Always consider your opinion on the knifed, you've tested! You pointed all details including scale colour, but didn't mentioned, there are two types of 732x.. Like your- with worm tracks, ) and like PM. Which on is better? Didn't find the answer... Trying to pick up the wright type of scale ... before purchasing.
I like the models "with work tracks". they are not too aggressive. But the plain scales feel just as good. I could not say which one is better. The ones with "worm tracks" are a bit more grippy. So if you're working with wet, greasy hands go for those handle scales
I had 2. One orange and one black. I gave them both to friends and they are using them. I do like the model and tbh it has many features which i miss with other, more expensive, knives.
Thanks. I already lowered the edge angle a bit more and I also decided to see how long it takes until rust spots start to appear.... Some more videos will follow
I just ordered one on Gearbest.com, and I went with the OD green version - I have the G720 and I love it, but I got it in the orange G10 scales, and you're right - the orange scales do show dirt very easily and quickly. Other than that, I have no complaints about my G720 and love it to death. It's built like a tank! Thanks for the videos - keep making them, as I'm a new subscriber and look forward to seeing many more from you. Cheers!
Cool Video! Always like hearing from you and listening to your knowledgeable commentary. Really enjoyed the demo too. Love how you drilled a hole with that thin flat blade. That is the number one concern I have that blade profile and this knife didn't seem to have a problem with it. Now if only it had an axis lock... Ganzo spoiled me.. :-)
i bought the green g10 version, it came with loose pocket clip screws and i could not tighten them, screws was to short, and i had to sand down some g10 and make scale thinner
in my case it is because of an accident that happened 2 years ago...however...us knife guys...we should always have a few extra band-aids with us...just in case :)
I have heard about the Stretch but never held one. I started playing with the G733 which is modeled after the Stretch... and now I am thinkin about the Stretch even more
I kind of thought the blade shape on the Ganzo G7331-BK (stretch) was kind of odd. I can't convince myself to seriously consider one, especially since I have the G7291-BK and G7321-BK already. Seems like I would be buying the same knife.
SpartanJohns, my Stretch (ZDP-189 version in "British Racing Green" -- well, not! ...but a VERY nice, neutrally complementary hue of green, nevertheless) is currently my most favored 'long blade' EDC folder. It is VERY versatile, lending itself to all sorts of effective grips: you can emulate the virtues of a shorter blade pretty easily, in practice. 3.42 ounces, measured. In addition, that FRN pattern on my edition of Stretch, anyway, is every bit as effective, but with noticeably less 'cheese grater' effect on the fingers than with my Stretch II, Native 5, or Manix 2 lightweight -- it's just more refined and upscale feeling. Note that the Stretch II is a very much different knife, despite the obvious superficial similarities. The Stretch is an EDC standout, despite some choil area flaws in design; the "II" is, as Spyderco themselves emphasize, a hunter's all-'round + game prep knife... more specialized. Either is quite noticeably upscale in finish & feel to some other popular Spyderco FRN/FRCP offerings, accounting well enough for the Stretch models' somewhat higher price. FYI.
:) They are pretty cool and they make great testing knives...for 20 $ you can pretty much do whatever you want to a knife, alter it any way you want and if you like it keep it if not...get anew one...
I think if you get new scales for the Endura, there some available in G10 (hard to find), the folder will completely change and feel a lot more stable. I sure wish Spyderco would make an Endura with G10 scales. I think it would be a total winner. As far as scales, I remember a Gerber folder, Gator, that has awesome scales, they are bulky and thick, but they are very comfortable.
The Cara Cara 2 from Byrd has G10 scales I think...and some other cool features I wished I would have seen on the Endura. maybe they will improve this model as well, or at least offer ome G10 scales...
@@hirayaman246 G732 nu am vazut la ei pe site. Au un back lock: 759. cu plasele de plastic eu as zice sa incerci un axis lock 7453 si 7563 sunt destul de utile la lucru...dar noa...arata ciudat
@@SpartanJohns My bad, era 729- semana, dar nu rasare :D.....mai au pe site Fh11 si Fh31......si ma gandeam si la 2 pietre diamantate pt ascutit....sau cu axis lock - 7533?
Hey man nice video , i really suggest you try the Ganzo G 7452 , it resembles the HK benchmade... Got my self the green model, my two buddies got the black and orange and all 3 knives are so consistent with such a solid lock while still remaining smooth. Would love to see what you think about it. I have the G720 as well as really think the g7452 is the same in terms of durability and a work horse. I have a Adamas, and other strong knives but why break them when I can use my Ganzo haha, cheers.
I have one with black handle and blade. I have used it and i think that I will make a video about it.. I like it! Not on par with the G720 because that one makes certain rough jobs easier..but what you said....durability...yes...i would agree...
Always interested in your reviews man. I bought this knife from Gearbest. It took 27 days to arrive (about standard for me). Overall it's a solid knife, typical of my other Ganzo knives. Two things though: First, It is not as close in size to the Spyderco Endura as I thought it would be. It is slightly smaller, closer in size to my G7291. Second the blade on mine was and still is not centered. I have tried to center it but when I do it gets too hard to open. Like you, I don't need to flick this knife open. I put a little oil on the pivot and it's smoother now and closer to center. I do like that it has two bronze washers and the blade is nice and sharp. Also I do prefer my G7321-BK contoured scales.
I never opened it up to see what kind of washers it has.... good news there! Mine came centered but I care little about that...ince this is a beater/teter so...at some point there will be little left of it... I prefer the thickness of the G732 handle to the one on the endura...I would like to see this model from Ganzo with a back lock or an axi lock.... a back lock form ganzo...that would be intresting...and deep carry pocket clips
I didn't open mine up either. I was taking some close up photos of it for a facebook post and saw the washers. A back lock version from Ganzo would be interesting. Have you seen the Brother 1601? It is a copy of the Spyderco Manix 2 XL for a lot less money. Even has a ball bearing lock! It's a big knife too, bigger than the G720! I posted photos of it on facebook.
I have seen the Brother 1601. I glanced over it but I am not sure...I like Ganzo's because the HT is decent...there are lots of cool models...but I don't know how the HT is... a while ago I got a PM2 clone...knife worked well but the HT was awful so I decided that if I buy inexpensive china made knives I will go for ganzo...at least they got the HT right!
Great video! Ive been impressed with Ganzo too. I wonder how long they will remain the low price that they are, considering that their quality is actually worth more than their cost?
I hope they keep the prices as low as they are now and the HT as well.. I got a couple more of their knives...one of them is a G740...I think that is their own design..pretty cool. A big folder for sure...i fear it is no match for the G720 but it might outdo it in cutting performace....
Very well said. I have all 4 knives. Why beat up a $125 Spydie when you can abuse a Ganzo? I don't beat up my nicer knives, that's what the Ganzo is for. There is no sensuous connection with them like you get with Spyderco. It kinda just sits there like a high-end gas station knife. Was gonna get several when I first discovered them. Changed my mind. Ganzo=(Yawn)............ Subbed, Like yer style!
Ich mag das Endura 4 auch...Wollte eins in ZDP aber die sind echt teuer...Und das G732 ist eine billige und, in ein paar hinsichten, verbesserte variante des Endura's. Natuerlich kann man die wirklich nicht mit einangder vergleichen...Endura macht einfach mehr spass LG Denis
Just a warning if you you order from Gearbest. After ordering they sent me a request for very sensitive documents (pictures of my credit card, my ID carde etc.) claiming it was for my "customer security" (wtf! right?). When I refused they cancelled my order (promising a refund in several weeks, early days so I dont know if I will get it). Then they asked my to place the order again. I have reported this to my bank and contacted authorities. Needless to say I will not shop there again.
That never happened to me. I ordered a few knives from them last month...and am waiting for the parcel to arrive anyday. They never asked me for such information. I payed thru paypal everytime... I prefer paypal over using my credit cards...
SpartanJohns I'm not sure why they did it. I asked them to explain but I only got overly polite pre-written appologies for the "inconvenience". I have around 20 or so knives on order from them which I have not seen yet. Hopefully they will deliver some of them. A lesson was definately learned about not using paypal. Up until this happened I've had no reason to dislike gearbest and it would serve no purpose to make this up.
SpartanJohns I'm not sure why they did it. I asked them to explain but I only got overly polite pre-written appologies for the "inconvenience". I have around 20 or so knives on order from them which I have not seen yet. Hopefully they will deliver some of them. A lesson was definately learned about not using paypal. Up until this happened I've had no reason to dislike gearbest and it would serve no purpose to make this up.
i did not say you made this up. i am just sharing my experiences with them. so far so good. If i will ever have a bad experience with them I will definitely share it. Your comment will stay there and should everything work out well I would appreciate you share that with the rest of us and should it not go well I would appreciate you sharing that with us even more. As gearbest is growing I think that we need as much feedback about them as possible. good or bad.
I will. Its actually quite comforting that you say that you've never had issues with them because you strike me as honest and straight forward as far as your reviews go.
depinde pt ce vrei....doar pt lucru...Endura e mai ieftin si face treaba buna...daca preferi si acel factor "tacti-cool" si sa te joci cu el...mai bine Para2....dar e mai scump...si intre S30V si VG10....daca ar avea acelasi pret as alege S30V dar tinand cont de pret...VG10 merita mai bine banii....
@@SpartanJohns Imi faceam doar planuri....un motiv obiectiv nu am, din moment ce Tenacious si Byrd de la tine fac tot ce doresc eu.....mai am o delica serata......ma incarc cu energie - sufleteasca - de fiecare data cand privesc video-urile tale !
@@SpartanJohns De placut nu ma satur ! Stii doar ce valoare au pt mine.....si ma ajuta, desi eu nu am ocazii cum ai tu.....ma gandeam sa mai achizitionez, dar am vazut video-ul tau cu fake-uri la para/ military si mi-e cam teama..... Da, timpul e necrutator.....sper ca mai bland la tine, la mine in ultima perioada m-a cam "incercat".....dar se poate mai rau...
@@hirayaman246 daca iti cumperi de pe site-uri mari nu ar trebui sa ai probleme cu fake-uri. dar nu de pe site-uri chinezesti sau de la utilizatori pe care nu ii cunosti. daca ai nevoie...anunta-ma si poate gasim un Para 2 second hand la un pret bun...de la cineva de incredere
Prefer the original to the fake even if it costs more $. Spyderco put in the time and effort. Ganzo copies it; very little time; very little effort; cheap shot.
You are using the wrong tool for the tasks you are doing. Test the knives for what they are geared for. Over using them just means you brought the wrong tool for the job. Not a good review in my opinion.
That if your choice! And you can by all means buy whatever you want. I care very little where the knife was manufactured as long as it does what I need it to do and it does not cost me an arm and a leg. Only buying "made in USA" stuff is not a bad decision...however I think that one can miss out on a few great tools that might be an imporvement. As you can see I have an Endura and I like it very much. But I can't say anything negative about the G732. not at the price I bought it at.
True... To me it makes sense to get a more inexpensive knife that just gets the job done... Also...getting a knife that has a good steel and a goot heat treatment for a low price allows me to test a few things without caring about the oney I lost since 15-20 $ is not really a lot of money
+SpartanJohns So TRUE, my friend. Very good well placed choice of words to that comment! Besides, when was the last time any expensive higher end knife company bothered to say, "hi, we see you have a few of our knives & are a true fan. So we decided to give you a knife at half retail price because your commitment to us is so valuable"! YEAH RIGHT. I spend my money wisely...& I own knives from mostly the US BC I live there, but I'm not ABOVE buying a cheaper quality tool if it appeals to me...I still love ur vids brother. Joey from Louisiana
I would. I dont like paying twice the US price for already overpriced american tacticool junk (especially not if said junk is also made in china) and I have plenty better knives already. However this blade profile is great for food prep so its a good knife to have around the kitchen or to to beat on and do whatever other things you wouldnt use a $250-400 knife for.
Just bought 2 ganzo g732. i am also the owner of an endura 2 (aus8) that i have been carrying for more than 10 years... But i have to face the truth. the ganzo g732 is absolutely fabulous. the two i just received are flawless. perfect early lockup. perfect centered blade. razor sharp out of the box and when i say razor sharp they are absolutely razor sharp. the pins are lock tights (torx6 and torx8). the liner are thick and solid. the g10 handles are thick but with soft texture. when i inspected them i was laughing so hard that my wife asked me why. i told her that these fucking chinese are awesome. this g732 is a beauty. just ordered 2 more. the g732 box is nice too and silice gel inside to fight rust. for 15usd? are you fucking kidding me! lol
Always consider your opinion on the knifed, you've tested! You pointed all details including scale colour, but didn't mentioned, there are two types of 732x.. Like your- with worm tracks, ) and like PM. Which on is better? Didn't find the answer... Trying to pick up the wright type of scale ... before purchasing.
I like the models "with work tracks". they are not too aggressive. But the plain scales feel just as good.
I could not say which one is better. The ones with "worm tracks" are a bit more grippy. So if you're working with wet, greasy hands go for those handle scales
For a liner lock setup it's seem amazing tough and well done now I know I'm going to get me one
Or two 🤔
I had 2. One orange and one black. I gave them both to friends and they are using them.
I do like the model and tbh it has many features which i miss with other, more expensive, knives.
I really like the ganzo. I owned another model for a year used it every day til I lost it. I will have to get one of these.
Losing a knife is never a pelasent experience..but if you lose one...it is good when it cost you only 20$
I agree. This looks like my next replacement
Very interesting. Nice blade. be very interested in more videos like this atb John
Thanks. I already lowered the edge angle a bit more and I also decided to see how long it takes until rust spots start to appear.... Some more videos will follow
Denis, your videos are always favorites for me on YT! Keep up the good work please ;-)
Thank you very much i really appreciate that. I will try to keep making videos...sometimes time is a factor but i do enjoy making videos :)
I just ordered one on Gearbest.com, and I went with the OD green version - I have the G720 and I love it, but I got it in the orange G10 scales, and you're right - the orange scales do show dirt very easily and quickly. Other than that, I have no complaints about my G720 and love it to death. It's built like a tank! Thanks for the videos - keep making them, as I'm a new subscriber and look forward to seeing many more from you. Cheers!
Cool Video! Always like hearing from you and listening to your knowledgeable commentary. Really enjoyed the demo too. Love how you drilled a hole with that thin flat blade. That is the number one concern I have that blade profile and this knife didn't seem to have a problem with it. Now if only it had an axis lock... Ganzo spoiled me.. :-)
i bought the green g10 version, it came with loose pocket clip screws and i could not tighten them, screws was to short, and i had to sand down some g10 and make scale thinner
how could i trust a guy about knives when he constantly has bandages around his fingers? oh wait... I have the same issue! :)
in my case it is because of an accident that happened 2 years ago...however...us knife guys...we should always have a few extra band-aids with us...just in case :)
SpartanJohns sorry To hear that :/
i'm sorry it happened. but i "got lucky"... still can do just about all the things I like i.e. sharpen and test knives ;)
if you like how the Endura feels in hand I have a feeling you would love the Stretch
I have heard about the Stretch but never held one. I started playing with the G733 which is modeled after the Stretch... and now I am thinkin about the Stretch even more
I kind of thought the blade shape on the Ganzo G7331-BK (stretch) was kind of odd. I can't convince myself to seriously consider one, especially since I have the G7291-BK and G7321-BK already. Seems like I would be buying the same knife.
SpartanJohns, my Stretch (ZDP-189 version in "British Racing Green" -- well, not! ...but a VERY nice, neutrally complementary hue of green, nevertheless) is currently my most favored 'long blade' EDC folder. It is VERY versatile, lending itself to all sorts of effective grips: you can emulate the virtues of a shorter blade pretty easily, in practice. 3.42 ounces, measured.
In addition, that FRN pattern on my edition of Stretch, anyway, is every bit as effective, but with noticeably less 'cheese grater' effect on the fingers than with my Stretch II, Native 5, or Manix 2 lightweight -- it's just more refined and upscale feeling. Note that the Stretch II is a very much different knife, despite the obvious superficial similarities. The Stretch is an EDC standout, despite some choil area flaws in design; the "II" is, as Spyderco themselves emphasize, a hunter's all-'round + game prep knife... more specialized. Either is quite noticeably upscale in finish & feel to some other popular Spyderco FRN/FRCP offerings, accounting well enough for the Stretch models' somewhat higher price. FYI.
I greatly like a liner lock. This looks like an interesting knife.
I think so too...It is pretty handy and the thickness makes it ok for comfort in hand
awesome video as always, I don't have a ganzo yet and I don't know if I ever will lolheeee great testing buddy 👍👍
:) They are pretty cool and they make great testing knives...for 20 $ you can pretty much do whatever you want to a knife, alter it any way you want and if you like it keep it if not...get anew one...
SpartanJohns yup can't go wrong with there prices lol but I got enough knives for now !
Great video as always.
salut...legea din Romania permite sa porti un briceag(edc)?
I think if you get new scales for the Endura, there some available in G10 (hard to find), the folder will completely change and feel a lot more stable. I sure wish Spyderco would make an Endura with G10 scales. I think it would be a total winner. As far as scales, I remember a Gerber folder, Gator, that has awesome scales, they are bulky and thick, but they are very comfortable.
The Cara Cara 2 from Byrd has G10 scales I think...and some other cool features I wished I would have seen on the Endura.
maybe they will improve this model as well, or at least offer ome G10 scales...
Ty for video, but u should make an axis-lock test. Axis-lock can be really weak sometimes and it can hit ur fingers in some situations.
Great as usual.
Thank you very much :)
Crezi ca ar merita sa il cumpar de pe site? Am primit cateva reduceri si ma batea un gand....
de pe ce site? eu am avut 2 si le-am facut cadou unor prieteni
mi-a placut modelul pentru ca avea grind subtire si lama mai lata....
@@SpartanJohns De pe elanterna, de unde am luat si pe celelalte....ganzo are ceva cu back-lock in gama lor?
@@hirayaman246 G732 nu am vazut la ei pe site. Au un back lock: 759. cu plasele de plastic
eu as zice sa incerci un axis lock
7453 si 7563 sunt destul de utile la lucru...dar noa...arata ciudat
@@SpartanJohns My bad, era 729- semana, dar nu rasare :D.....mai au pe site Fh11 si Fh31......si ma gandeam si la 2 pietre diamantate pt ascutit....sau cu axis lock - 7533?
@@hirayaman246 729 e fain... l-am prezentat si pe ala...
pietrele...tu stii ce ai nevoie...eu tot zic: hartie abraziva si o bucata plata de lemn
Super Messer hab ich mir in alle 4 Faben geholt.
Cool...ich habe dieses hier und ein in schwarz...
Hey man nice video ,
i really suggest you try the Ganzo G 7452 , it resembles the HK benchmade... Got my self the green model, my two buddies got the black and orange and all 3 knives are so consistent with such a solid lock while still remaining smooth. Would love to see what you think about it. I have the G720 as well as really think the g7452 is the same in terms of durability and a work horse. I have a Adamas, and other strong knives but why break them when I can use my Ganzo haha, cheers.
I have one with black handle and blade. I have used it and i think that I will make a video about it..
I like it! Not on par with the G720 because that one makes certain rough jobs easier..but what you said....durability...yes...i would agree...
Always interested in your reviews man. I bought this knife from Gearbest. It took 27 days to arrive (about standard for me). Overall it's a solid knife, typical of my other Ganzo knives. Two things though: First, It is not as close in size to the Spyderco Endura as I thought it would be. It is slightly smaller, closer in size to my G7291. Second the blade on mine was and still is not centered. I have tried to center it but when I do it gets too hard to open. Like you, I don't need to flick this knife open. I put a little oil on the pivot and it's smoother now and closer to center. I do like that it has two bronze washers and the blade is nice and sharp. Also I do prefer my G7321-BK contoured scales.
I never opened it up to see what kind of washers it has.... good news there!
Mine came centered but I care little about that...ince this is a beater/teter so...at some point there will be little left of it...
I prefer the thickness of the G732 handle to the one on the endura...I would like to see this model from Ganzo with a back lock or an axi lock....
a back lock form ganzo...that would be intresting...and deep carry pocket clips
I didn't open mine up either. I was taking some close up photos of it for a facebook post and saw the washers. A back lock version from Ganzo would be interesting. Have you seen the Brother 1601? It is a copy of the Spyderco Manix 2 XL for a lot less money. Even has a ball bearing lock! It's a big knife too, bigger than the G720! I posted photos of it on facebook.
I have seen the Brother 1601. I glanced over it but I am not sure...I like Ganzo's because the HT is decent...there are lots of cool models...but I don't know how the HT is... a while ago I got a PM2 clone...knife worked well but the HT was awful so I decided that if I buy inexpensive china made knives I will go for ganzo...at least they got the HT right!
OK I give up. What is HT?
Sorry! My bad. HT is heat treatment. :)
Man, why they have that hole on the blade?
easy opening and it does not get in the way of sharpening
Great video! Ive been impressed with Ganzo too. I wonder how long they will remain the low price that they are, considering that their quality is actually worth more than their cost?
I hope they keep the prices as low as they are now and the HT as well..
I got a couple more of their knives...one of them is a G740...I think that is their own design..pretty cool. A big folder for sure...i fear it is no match for the G720 but it might outdo it in cutting performace....
Very well said. I have all 4 knives. Why beat up a $125 Spydie when you can abuse a Ganzo? I don't beat up my nicer knives, that's what the Ganzo is for. There is no sensuous connection with them like you get with Spyderco. It kinda just sits there like a high-end gas station knife. Was gonna get several when I first discovered them. Changed my mind. Ganzo=(Yawn)............ Subbed, Like yer style!
I got one, waiting for it to arrive.
I liked mine from the moment i got it
The knife arrived. I had to loosen the pivot screw. I could hear a squeak when closing the blade. Overall, I like the knife.
Interessant das Teil. Was hast du eigentlich an deinem rechten Daumen gemacht,weil du immer ein Pflaster drumherum hast?
Ist es...ich mag sehr damit rumspielen.
Ich hatte ein Unfall letztes Jahr...daher das Pflaster...
I love my Endura 4,Christoph
Ich mag das Endura 4 auch...Wollte eins in ZDP aber die sind echt teuer...Und das G732 ist eine billige und, in ein paar hinsichten, verbesserte variante des Endura's.
Natuerlich kann man die wirklich nicht mit einangder vergleichen...Endura macht einfach mehr spass
LG
Denis
Good video......👍
Thank you
I like this Knife too.
BG Andy
I decided to have this one strictly as a testing knife for the HT that Ganzo uses with the 440c they have in all their knives...so far so good.
They should have used the Axis lock on this one.
I prefer my Manix 2 to my Endura 4 because it cuts meat better and the lock does not fail from pocket lint.
Absolutely love my G720 btw.
My top 2 favorites are the Para 2 and the Endura...My manix is an older version. it has a back lock. Even so: a great knife!
Just a warning if you you order from Gearbest. After ordering they sent me a request for very sensitive documents (pictures of my credit card, my ID carde etc.) claiming it was for my "customer security" (wtf! right?). When I refused they cancelled my order (promising a refund in several weeks, early days so I dont know if I will get it). Then they asked my to place the order again. I have reported this to my bank and contacted authorities. Needless to say I will not shop there again.
That never happened to me. I ordered a few knives from them last month...and am waiting for the parcel to arrive anyday.
They never asked me for such information. I payed thru paypal everytime... I prefer paypal over using my credit cards...
SpartanJohns I'm not sure why they did it. I asked them to explain but I only got overly polite pre-written appologies for the "inconvenience". I have around 20 or so knives on order from them which I have not seen yet. Hopefully they will deliver some of them. A lesson was definately learned about not using paypal. Up until this happened I've had no reason to dislike gearbest and it would serve no purpose to make this up.
SpartanJohns I'm not sure why they did it. I asked them to explain but I only got overly polite pre-written appologies for the "inconvenience". I have around 20 or so knives on order from them which I have not seen yet. Hopefully they will deliver some of them. A lesson was definately learned about not using paypal. Up until this happened I've had no reason to dislike gearbest and it would serve no purpose to make this up.
i did not say you made this up.
i am just sharing my experiences with them. so far so good. If i will ever have a bad experience with them I will definitely share it. Your comment will stay there and should everything work out well I would appreciate you share that with the rest of us and should it not go well I would appreciate you sharing that with us even more. As gearbest is growing I think that we need as much feedback about them as possible. good or bad.
I will. Its actually quite comforting that you say that you've never had issues with them because you strike me as honest and straight forward as far as your reviews go.
de unde lai luat ?
gearbest
Deci pana la urma tot Endura sau Para 2 sa aleg....
depinde pt ce vrei....doar pt lucru...Endura e mai ieftin si face treaba buna...daca preferi si acel factor "tacti-cool" si sa te joci cu el...mai bine Para2....dar e mai scump...si intre S30V si VG10....daca ar avea acelasi pret as alege S30V dar tinand cont de pret...VG10 merita mai bine banii....
@@SpartanJohns Imi faceam doar planuri....un motiv obiectiv nu am, din moment ce Tenacious si Byrd de la tine fac tot ce doresc eu.....mai am o delica serata......ma incarc cu energie - sufleteasca - de fiecare data cand privesc video-urile tale !
@@hirayaman246 ma bucur ca iti plac. Tot mai incerc sa filmez...dar timpul...ne omoara pe toti...
@@SpartanJohns De placut nu ma satur ! Stii doar ce valoare au pt mine.....si ma ajuta, desi eu nu am ocazii cum ai tu.....ma gandeam sa mai achizitionez, dar am vazut video-ul tau cu fake-uri la para/ military si mi-e cam teama.....
Da, timpul e necrutator.....sper ca mai bland la tine, la mine in ultima perioada m-a cam "incercat".....dar se poate mai rau...
@@hirayaman246 daca iti cumperi de pe site-uri mari nu ar trebui sa ai probleme cu fake-uri. dar nu de pe site-uri chinezesti sau de la utilizatori pe care nu ii cunosti.
daca ai nevoie...anunta-ma si poate gasim un Para 2 second hand la un pret bun...de la cineva de incredere
It's G7321 model
It only says G732 on the blade
The 4th number is the finish on the blade. Stone wash or satin.
Stretch is best try it
I have been looking at the Stretch....especially since I like the G733 so much....
I am still waiting to find on used but still in good condition....
Prefer the original to the fake even if it costs more $. Spyderco put in the time and effort. Ganzo copies it; very little time; very little effort; cheap shot.
You are using the wrong tool for the tasks you are doing. Test the knives for what they are geared for. Over using them just means you brought the wrong tool for the job. Not a good review in my opinion.
I am sure you left this comment on the video without watching the video. watch the video and see if your comment applies to this video.
No lad it looks very much like a spyderco military why does no one notice this !
Because it doesn't!
Give it a camo scale and it does
davidpyper82
Look up the g729. Know your knives bro.
I think.the design of this knife is.. very much illegal copy of endura 4.
that's stealing.. shame. cheap chinese knife.
You talk to much sir
Do I? Try watching without sound!
asta a fost buna :))
davidpyper82
It’s a review dummy.
You have written to much.
I'd never buy a Spyderco knockoff. I'd rather buy the real deal and support a US based company.
But then there are 10 other people that just want a good cheap knife without caring
That if your choice! And you can by all means buy whatever you want. I care very little where the knife was manufactured as long as it does what I need it to do and it does not cost me an arm and a leg.
Only buying "made in USA" stuff is not a bad decision...however I think that one can miss out on a few great tools that might be an imporvement.
As you can see I have an Endura and I like it very much. But I can't say anything negative about the G732. not at the price I bought it at.
True... To me it makes sense to get a more inexpensive knife that just gets the job done...
Also...getting a knife that has a good steel and a goot heat treatment for a low price allows me to test a few things without caring about the oney I lost since 15-20 $ is not really a lot of money
+SpartanJohns
So TRUE, my friend. Very good well placed choice of words to that comment! Besides, when was the last time any expensive higher end knife company bothered to say, "hi, we see you have a few of our knives & are a true fan. So we decided to give you a knife at half retail price because your commitment to us is so valuable"! YEAH RIGHT. I spend my money wisely...& I own knives from mostly the US BC I live there, but I'm not ABOVE buying a cheaper quality tool if it appeals to me...I still love ur vids brother.
Joey from Louisiana
I would. I dont like paying twice the US price for already overpriced american tacticool junk (especially not if said junk is also made in china) and I have plenty better knives already. However this blade profile is great for food prep so its a good knife to have around the kitchen or to to beat on and do whatever other things you wouldnt use a $250-400 knife for.