Thank you for making the greatest DMX software ! The only one I found that can make all my dreams comes true with real unlimited possibilities on a single button. Thank you also for the virtual console and midi mapping that can make your computer looks like an space shuttle control system.
Have an issue with this... The flash button "reset all" and "all light off" does not reset value, it does it only when the button is hold, when button is unhold old value are back. How to have this reset button working ?
is there like a sequencer to like to sync this to music? I think it is called time code. I'm new to all this and only have 2 moving heads. I just want to sync them to my music on my PC. Nvm, I see it on your website. Is there a video on how to sequence?
This is extremely helpful!!! Thanks Massimo!! I don't have moving heads yet, but I will soon, and this is going to keep me from pulling my hair out from hours of frustration. I am using QLC+ for lighting a band, and I have programmed all of the songs they perform using chases, where I have anywhere from 10-30 scenes and other chases embedded inside the main song chase. Sometimes I need more finite control that 1/100 of a second in my chases. Is this possible? and if so how?
Thanks Massimo it's awesome! There is a low frecuency noise in the sound of this video. I think It can be attenuated with a hpf in any equalizer of your video/audio editor.
Hello Massimo, Qlc+ noob here. Is there a way to remove the fixtures' offsets when shutting an effect off? So that the fixtures will return pointing in their original position. Thanks
Hi, i need help with the strobe. Because when i tun on the intensity the lights are strobing but the strobe channel is off. If you have a solution please help me because i love this software
I use a momentary button on my virtual console that has the strobe and intensity channels enabled with the strobe off and I use it to kill the strobe function.
Hello Massimo, thanks a lot for your tutos ! do you think a surface go is ok for qlc+ ? i tryed to use both rekorbox & qlc+ on my macbookpro but sound is poor and the mac shut down... regards
Hi Massimo, with Qlc + 4.12.4, I need to insert a Show, a piece of about 1 minute where 7 lights must be switched on in sequence for a duration of 150ms each. Can you advise me which is the best way to do it? Thanks so much. Marco
Hi! Nice educative software. For me while living on a hardship. Can't afford so many fixtures gobos etc in reality. Being a grew_old disabled person following the RUclips video runs a bit too fast for me to understand everything in time. While my basic creativity focuses towards music composition, from my point of view, expecting modestly more coincidence within MIDI events in music composition. Have to learn a lot as well. Best regards! O
lol i cant get this to work - my lights arent listed in the fixtures which means they dont match on simple desk, when i try to make channel groups the colours dont match...when i try to make a scene and link it to a button, the button doesnt work. can you please do a tutorial for idiots like me who have only just got a t bar and 3 chinese lights and a usb todmx. ive never done any of this before so im totally new. im struggling with CORE CONCEPTS omg im so dumb
Lo spessore è ben al di là della tecnologia. Qui c'è passione unita ad enormi capacità, se avessi la possibilità di arrivare a Musk non raccomanderei me stesso, ma questo ragazzo
È un peccato che tu li faccia solo in inglese. Almeno i sottotitoli (anche non precisi) in italiano. Peccato, anche se comprendo che in inglese diventa globale il tuo video
i just want my stupid midi controler to make pretty light washes that change when i click keys, and every once in a while take signals from my drum moduel and flash some lights. surely it doesnt need to be this bloody complicated
grazie per il video. Sono dei tutorial utilissimi. Peccato che ti sei fissato sull'inglese, e non fai neanche un video in italiano. Potresti allargare di molto il bacino di utenza. Mi sembra assurdo che uno per usare un software deve per forza imparare l'inglese.
To be fair, most of the people who watched these videos were only able to understand his tutorials _because_ he recorded them in English. Also, to "widen" the reach it'd probably be smarter to record it in 23 other languages before his native language, sadly: en.wikipedia.org/wiki/List_of_languages_by_total_number_of_speakers
Thank you for making the greatest DMX software ! The only one I found that can make all my dreams comes true with real unlimited possibilities on a single button. Thank you also for the virtual console and midi mapping that can make your computer looks like an space shuttle control system.
Please, more videos, they are very instructive! Thx 👍
Have an issue with this... The flash button "reset all" and "all light off" does not reset value, it does it only when the button is hold, when button is unhold old value are back. How to have this reset button working ?
+1
Great software, I'm using it for my light setup...
You're THE BEST!!! thank you so much!!!
My thanks well explained and so awesome this is all possible
is there like a sequencer to like to sync this to music? I think it is called time code. I'm new to all this and only have 2 moving heads. I just want to sync them to my music on my PC.
Nvm, I see it on your website. Is there a video on how to sequence?
yes! ruclips.net/video/kSGm7FuQ-aA/видео.html
This is extremely helpful!!! Thanks Massimo!! I don't have moving heads yet, but I will soon, and this is going to keep me from pulling my hair out from hours of frustration.
I am using QLC+ for lighting a band, and I have programmed all of the songs they perform using chases, where I have anywhere from 10-30 scenes and other chases embedded inside the main song chase. Sometimes I need more finite control that 1/100 of a second in my chases. Is this possible? and if so how?
Thanks Massimo it's awesome!
There is a low frecuency noise in the sound of this video. I think It can be attenuated with a hpf in any equalizer of your video/audio editor.
+Grupo The River yeah, sorry about that. I tried to filter it but then my voice sounded like a robot :(
Hello Massimo, Qlc+ noob here.
Is there a way to remove the fixtures' offsets when shutting an effect off?
So that the fixtures will return pointing in their original position.
Thanks
Thanks a lot! I've learned much from this tutorial.
Hi, i need help with the strobe. Because when i tun on the intensity the lights are strobing but the strobe channel is off. If you have a solution please help me because i love this software
I use a momentary button on my virtual console that has the strobe and intensity channels enabled with the strobe off and I use it to kill the strobe function.
another question is whether I can put a dmx table to operate together with the QLC
Hello Massimo, thanks a lot for your tutos ! do you think a surface go is ok for qlc+ ? i tryed to use both rekorbox & qlc+ on my macbookpro but sound is poor and the mac shut down... regards
Love QLC+. Any tips for setting limits on the moving heads? Is it just trail and error?
great vid learned a lot
Muito bom! Tenho uma dúvida: consigo deixar esses valores salvos na lista em algum lugar?
good morning there is manual in portuguese , there are not many explanatory videos here
Great stuff. This software makes a great show much easier. Your audio blows though. ;)
Yeah, sorry. For some reason the audio card captured a lot of line noise :(
Very good! I have a question: can I get these saved values on the list somewhere?
I'm using google translate, I'm from Brazil.
Hi Massimo,
with Qlc + 4.12.4, I need to insert a Show, a piece of about 1 minute where 7 lights must be switched on in sequence for a duration of 150ms each. Can you advise me which is the best way to do it?
Thanks so much.
Marco
thank you Massimo !
Very Nice software!
Very Good Job. Thanks a lot.
Hi! Nice educative software. For me while living on a hardship. Can't afford so many fixtures gobos etc in reality. Being a grew_old disabled person following the RUclips video runs a bit too fast for me to understand everything in time. While my basic creativity focuses towards music composition, from my point of view, expecting modestly more coincidence within MIDI events in music composition. Have to learn a lot as well. Best regards! O
lol i cant get this to work - my lights arent listed in the fixtures which means they dont match on simple desk, when i try to make channel groups the colours dont match...when i try to make a scene and link it to a button, the button doesnt work. can you please do a tutorial for idiots like me who have only just got a t bar and 3 chinese lights and a usb todmx. ive never done any of this before so im totally new. im struggling with CORE CONCEPTS omg im so dumb
When I try to import a fixture it requires a qxfl file type but my fixtures I made on another laptop are exporting as qxf files.
hola Massimo, me podrias explicar paso a paso como poner el Capture en el QLC+?
HELLO GOOD NIGHTS HOW TO CREATE THE CONTROLS HANDBOOK IN THE VIRTUAL CONSOLE OF QLC WHY IN YOUR VIDEO NUMBER 7 DO NOT SAY THANKS
Lo spessore è ben al di là della tecnologia. Qui c'è passione unita ad enormi capacità, se avessi la possibilità di arrivare a Musk non raccomanderei me stesso, ma questo ragazzo
How to set up the setting for q light and capture? It will not work for me. Some one there can help me?
Luar Biasa.....
I have a question regard qlc+ I wanted to know if qlc can receive midi notes to trigger scenes for example via ableton
Max Viana search ableton qlc
Massimo, are you running Capture Argo on Linux? How? Capture is the last thing tying me to Windows...
I just launched it with wine
Where did you get that stage?
Great, how do you run "Argo Capture" with "QLC"?
+Thierry Rodolfo I've said it in the video: via ArtNet
I tried without success.
Thanks for this tutorial It only needs the function "Follow Spot" :)
yo vengo del 3d view en windows, pero ahora estoy iniciandome en QLC+ en Mac
ciao massimo.. potresti contattarmi per favore, ho un problema che non riesco a risolvere e non trovo in nessuno dei tuoi tutorial.. grazie mille..
I do not provide private support. Write in the forums, in english, like everybody else in the world.
Massimo Callegari ok.. whre is the forumo? thanks
Are you kidding me ? lmgtfy.com/?q=qlc%2B+forum
i'm using qlc with wifi to dmx interface magicboxdmx
i love fx engine
È un peccato che tu li faccia solo in inglese. Almeno i sottotitoli (anche non precisi) in italiano. Peccato, anche se comprendo che in inglese diventa globale il tuo video
Where is the Blender Plugin when you need it! LOL
It would be so awesome if QLC+ had a build in visualizer some day *_*
Look at the demo of v5.0 - it looks like there is a 3D function! I hope I saw right anyway!
i just want my stupid midi controler to make pretty light washes that change when i click keys, and every once in a while take signals from my drum moduel and flash some lights. surely it doesnt need to be this bloody complicated
grazie per il video. Sono dei tutorial utilissimi. Peccato che ti sei fissato sull'inglese, e non fai neanche un video in italiano. Potresti allargare di molto il bacino di utenza. Mi sembra assurdo che uno per usare un software deve per forza imparare l'inglese.
To be fair, most of the people who watched these videos were only able to understand his tutorials _because_ he recorded them in English.
Also, to "widen" the reach it'd probably be smarter to record it in 23 other languages before his native language, sadly: en.wikipedia.org/wiki/List_of_languages_by_total_number_of_speakers
great , thank you Massimo