Awesome vid, thanks for giving a quick overview of the basics, really helps to show what can be done with this initially intimidating looking software!
lods, im using a macbook air mid 2012, is it possible the latest version of qlc+ will work?, cos that is what i downloaded, or should i replace it with that same version you had. im planing to buy usb to dmx interface, good thing i saw your video. thanks for sharing, i will watch all your videos.
@@johankoerts9191 mine, macbook air mid2012 OSX BIG SUR i downloaded qlc version 4.12.6 and it works fine. All lights im using, i created new fixture for it.
Thanks for the video. I am just now attempting to run lighting on my 2022 M1 MacMini under the Ventura 13.2, and I have the Enttec DMX USB Pro, and a couple of LED Dimmers, not to mention running QLC+ with the latest version 4.xx+ (not 5.0 beta yet). I set-up my fixtures, selected the DMX USB Pro as the Input. My fixtures do not seem to be responding to any movements in the Simple Desk, but the QLC DMX monitor shows the changes from the sliders. What MAC OS version are you running? Did you have to alter any Apple drivers (such as FTDI) to get your fixtures to receive DMX commands? My most ambitious goal is to have My Ableton Live software control the lighting thru QLC+, possible thru the use of the Apple IAC Driver to connect them together. Any advice/suggestions? Anyway, looking forward to more videos from you on setting up QLC+ fixtures/scenes/chases/etc. Thanks again.
@@DJDLS do you have a tutorial how to import your created fixtures? i find it difficult to use my personal fixtures using the fixture definition editor. if i try to look to my personal fixtures there is none on the fixture list.
Awesome vid, thanks for giving a quick overview of the basics, really helps to show what can be done with this initially intimidating looking software!
glad it helped you out, cheers!
Thanks! You made a really great tutorial going over the basics of QLC+!
@@LTPersaud thanks!
Thank you for this turtorial
its really easy to understand for me as a beginner
🤓👍👍
Great beginner tutorial. Thanks.
Thanks for watching!
Great concise survey of QLC+. Now I will try...
@@theplinkerslodge6361 thanks!
Great video!! Thanks for putting this together! 😊👍👍👍
🤓👍👍
Well Explained! Thanks for this video. -Nathan :)
Hope it helps you get started 🙂
amazing tutorial, very well explained.
@@vminus7505 thank you!
Great video man! Thank you.
🤓
lods, im using a macbook air mid 2012, is it possible the latest version of qlc+ will work?, cos that is what i downloaded, or should i replace it with that same version you had. im planing to buy usb to dmx interface, good thing i saw your video. thanks for sharing, i will watch all your videos.
Mine is mbp mid-2012. I think it will work on yours too. Yes try the latest version first and if it does what you need then great 🤓
@@DJDLS thanks lods
Hi Bvl&l, what version is it? how many have you tested already?
I installed version 4.12.6 on a 2014 MacBook Pro, but QLC+ keeps crashing. I'm going to try version 4.11.2
@@johankoerts9191 mine, macbook air mid2012 OSX BIG SUR i downloaded qlc version 4.12.6 and it works fine. All lights im using, i created new fixture for it.
im running it on a raspberry pi and its so laggy its hard to work out what each button does. Great vid!
@@CampantherFans-dv9od thanks
Thanks for the video. I am just now attempting to run lighting on my 2022 M1 MacMini under the Ventura 13.2, and I have the Enttec DMX USB Pro, and a couple of LED Dimmers, not to mention running QLC+ with the latest version 4.xx+ (not 5.0 beta yet). I set-up my fixtures, selected the DMX USB Pro as the Input. My fixtures do not seem to be responding to any movements in the Simple Desk, but the QLC DMX monitor shows the changes from the sliders.
What MAC OS version are you running? Did you have to alter any Apple drivers (such as FTDI) to get your fixtures to receive DMX commands?
My most ambitious goal is to have My Ableton Live software control the lighting thru QLC+, possible thru the use of the Apple IAC Driver to connect them together.
Any advice/suggestions?
Anyway, looking forward to more videos from you on setting up QLC+ fixtures/scenes/chases/etc. Thanks again.
i am running 10.13.6 High Sierra on a very old MBP mid-2012. i did not have to alter drivers, the dongle i use was detected right away.
@@DJDLS thanks for the reply & info. I have hope in figuring this out.
@@RayC123456789 Hi, have you ever figured it out? I was thinking about buying the same unit ( Enttec DMX USB Pro ) and I also have MacBook M1.
Wow. Pwede po ba ma send via gmail ang na create mo na fixtures sir? at pwede kaya ito ma open sa windows pc? Salamat po
Naformat na laptop ko wala na yung files 😭😂
Hi sir tanong sana ako d kasi makita yung rspro sa output pa help sana po kung paano mapalabas yun
Tagal ko na di nagagamit ito bro di ko masasagot 😐
Great tutorial 👍
Thanks!
Hi sir san po merong fixtures ng big dipper wla po sa version 12
Ikaw gagawa sa fixture creator.
Paano ka ma reach paps?
@@judemichaelmartinez6246 fb page. If you're going to ask about qlc, matagal ko na di nagamit yan 😂
thanks sir
Solid dmx interface nyo 👍
@@DJDLS may nag send lang po na client sakin nitong video kanina po, maraming samalat po dito sir
is this a filipino Video Creator?
Yes.
@@DJDLS do you have a tutorial how to import your created fixtures? i find it difficult to use my personal fixtures using the fixture definition editor. if i try to look to my personal fixtures there is none on the fixture list.
@@papadenz2022 you have to save your created fixtures in the default directory.
@@DJDLS i saved the fixtures in fixture folder that contain the fixtures from the os. but if i try to search my brand name folder, i cant find it.
@@DJDLS maybe its on the version that i used. im using the latest version
4.12.6
Nose bleed ako 😅
hahaha pang-international kasi yung content paps :D