Glad I found this video. I saw one from another creator recently where he laser etched the tile then used sharpies to color the etchings and I wondered if alcohol inks would work. I guess the answer is yes.
@@truthunfiltered314 I could be wrong, but I think Sharpie ink might be alcohol based so the two are pretty similar. I do think the alcohol inks give you a larger color pallet plus the ability to mix your own colors. Have fun with it!
I haven't done any tile yet, but maybe try using powder coat paint and melt with a heat gun. Do not use your laser because it can harm the laser long term.
Very cool. Have you ever had the need to re-seal the tile over the engraving, with e.g. ceramic nano finish? How do the inks stand up to repeated use/washing?
I’m going to have to admit that I don’t have answers for these questions. I’ve treated them like I do Norton White Tile method tiles…… that is, I’ve not done any sealer. They haven’t faded any, at least not yet. I suppose they would fade or bleed if exposed to alcohol as they are alcohol based inks. I do know that the alcohol inks are pretty resilient. The few times I’ve gotten some on my skin, it takes a LOT of scrubbing to get it off, even if I do use alcohol to scrub with.
I can tell you from using epoxy resin that alcohol inks are not light-fast and do fade quickly under sunlight. You will need to find light-fast inks to prevent fading. You most likely will want to seal the engraving afterwards for long term durability.
Nice work! When the tile gets wet is there any running of the colors? I find that using Sharpies with your method there is a bit running of the color when rubbing the moisture with a cloth. In the Norton Method the tile substrate is actually burnt so it doesn't run,
I knew there was a bit of bleed with Sharpies and water, but your comment made me curious about the alcohol ink as I hadn't tested it. I just took a tile over to the sink and scrubbed a dyed area with a scrub brush and the color stayed put. I kind of figured as much since the alcohol dyes are advertised as waterproof and any time I've accidentally gotten a bit on my finger, it hasn't disappeared until new skin takes it's place. 🙂
I loved this video and tried it myself. I ended up having "micro-cracks" in the glaze of the tile. Did you experience the same thing? I ran a test from 300-2000mm/m and 50-100%. All had the cracks
This comment made me go out and inspect a couple of the trivets I have in the kitchen and no, I haven't experienced any cracks in the glaze. I wonder if it's a difference in the tile manufacturers? The ones I'm using are the common ones at Menards that they sell by the piece.
To use on wood, I generally dilute it with denatured alcohol. I'd like to tell you an exact ratio, but it really depends on how intense you want the color. I will say that a little bit goes a long way. I apply it with a cheap disposable foam brush. Depending on the color and intensity, I may do more than one coat. It dries really quickly and is ready for a top coat or to be cut within 15 minutes or so.
In case you still needed info, I just made a video demonstrating using alcohol ink as a wood stain. ruclips.net/video/33DpETeB7BE/видео.htmlsi=dHu_ok9sQj2ZcJzK
I just saw you video on the lahobbyguy forums and commented there too. I commenting here so it will help you with the channel some. Great idea and I'm going to try it soon. You mentioned your numbers but what wattage are you using? Thanks
I finally got around to putting something up about using alcohol inks as a wood stain. Full demonstration: ruclips.net/video/33DpETeB7BE/видео.htmlsi=dHu_ok9sQj2ZcJzK
Glad I found this video. I saw one from another creator recently where he laser etched the tile then used sharpies to color the etchings and I wondered if alcohol inks would work. I guess the answer is yes.
@@truthunfiltered314 I could be wrong, but I think Sharpie ink might be alcohol based so the two are pretty similar. I do think the alcohol inks give you a larger color pallet plus the ability to mix your own colors. Have fun with it!
I haven't done any tile yet, but maybe try using powder coat paint and melt with a heat gun. Do not use your laser because it can harm the laser long term.
How do you seal the tiles after?
Thats a really cool technique, thanks for sharing
Very cool. Have you ever had the need to re-seal the tile over the engraving, with e.g. ceramic nano finish? How do the inks stand up to repeated use/washing?
I’m going to have to admit that I don’t have answers for these questions. I’ve treated them like I do Norton White Tile method tiles…… that is, I’ve not done any sealer. They haven’t faded any, at least not yet. I suppose they would fade or bleed if exposed to alcohol as they are alcohol based inks. I do know that the alcohol inks are pretty resilient. The few times I’ve gotten some on my skin, it takes a LOT of scrubbing to get it off, even if I do use alcohol to scrub with.
I can tell you from using epoxy resin that alcohol inks are not light-fast and do fade quickly under sunlight. You will need to find light-fast inks to prevent fading. You most likely will want to seal the engraving afterwards for long term durability.
Nice work! When the tile gets wet is there any running of the colors? I find that using Sharpies with your method there is a bit running of the color when rubbing the moisture with a cloth. In the Norton Method the tile substrate is actually burnt so it doesn't run,
I knew there was a bit of bleed with Sharpies and water, but your comment made me curious about the alcohol ink as I hadn't tested it.
I just took a tile over to the sink and scrubbed a dyed area with a scrub brush and the color stayed put. I kind of figured as much since the alcohol dyes are advertised as waterproof and any time I've accidentally gotten a bit on my finger, it hasn't disappeared until new skin takes it's place. 🙂
Thanks for the reply. I'm going to try your method.
I loved this video and tried it myself. I ended up having "micro-cracks" in the glaze of the tile. Did you experience the same thing?
I ran a test from 300-2000mm/m and 50-100%. All had the cracks
This comment made me go out and inspect a couple of the trivets I have in the kitchen and no, I haven't experienced any cracks in the glaze. I wonder if it's a difference in the tile manufacturers? The ones I'm using are the common ones at Menards that they sell by the piece.
Nice! I'll have to get some tiles now 🙂
That's one of the nice things about experimenting with tile projects: The tile is cheap. :-) I think these larger ones were about a buck each.
Never thought to use my alcohol ink for this. How do you do this on wood ?
To use on wood, I generally dilute it with denatured alcohol. I'd like to tell you an exact ratio, but it really depends on how intense you want the color. I will say that a little bit goes a long way. I apply it with a cheap disposable foam brush. Depending on the color and intensity, I may do more than one coat. It dries really quickly and is ready for a top coat or to be cut within 15 minutes or so.
In case you still needed info, I just made a video demonstrating using alcohol ink as a wood stain. ruclips.net/video/33DpETeB7BE/видео.htmlsi=dHu_ok9sQj2ZcJzK
I believe if you spray clear coat or flood with epoxy... the colors will pop more and add some value...
I'll have to give it a try. Thanks!
For a trivet, a clear coat or epoxy may have an issue with the heat.
I just saw you video on the lahobbyguy forums and commented there too. I commenting here so it will help you with the channel some. Great idea and I'm going to try it soon. You mentioned your numbers but what wattage are you using? Thanks
I think I mentioned it at the end, but it's an xTool D1 Pro 20 watt laser. Thanks for checking it out!
@@bobjosjor830720W Diode laser at 30mm/s?
What type of laser is this diode or ….
It’s an xTool D1 20 watt diode laser.
Will you make a video of you doing this on wood? You're saying it but I can't visualize it 😂
This is a technique for tile. I do use alcohol ink to stain wood, if that is what you are referring to. I could make a video of that, if you’d like.
@@bobjosjor8307 I apologize, yes I meant about the wood. You mentioned it near the end of your video. That would be cool to see..
@@noelv1976 I'll put something up in the next few days for you.
I finally got around to putting something up about using alcohol inks as a wood stain. Full demonstration: ruclips.net/video/33DpETeB7BE/видео.htmlsi=dHu_ok9sQj2ZcJzK