Its the dots that make it look like a image, its hard for me to explain but think like how a newspaper is a bunch of black dots really close to gether and that make a picture, that is dithering @charlenechoate17
hello everything is fine? My name is Pedro and I'm from Brazil. I discovered your website and loved it. I have an 80w co2 machine. A3 Topswindow plate. I open the website and do the treatment processes and save it for the acrylic material I use. Every time I print, the recording stops at one part and the following appears on the display: File error. And I can't do the recording again, I have to cancel it. Almost every photo I take shows this, could you help me with what it could be? Congratulations, fantastic videos...
Hello everything is fine? My name is Pedro, I have a co2 laser 80w controller board: Topwisdom A3. I love the channel's videos, I do the processing on imag-r, I choose the material and have it recorded. But when I go to record the photos, the recording stops halfway through and a message appears on the controller's display: "File error". This only happens when I record photos. Could you help me resolve this situation that is making me afraid every time I need to record a photo? Thank you very much
That's really cool. Been a while since I've done a tile. I'll have to give this a try. thanks!
Excellent video.
super !!! 👏👏👍🤟
Hi, very, very amazing! Show all your works.
Great vid.
Are these measurements good for any laser ? I have a WeCreat Vista 10W laser
What wattage laser do you have?
hi, great job. do you use airassist?
@@andrejmazur9983 yes :)
what kind of lazer are you using? I have a 100 watt and am wondering what my settings should be? do you have a suggestion?
Any reason this can’t be done with a diode laser?
@@philipershler420 no, you can also do it on diode as well
@@ImagR-LaserThanks! And in that case, the XTOOL S1 would make the actual engraving process even easier. No need to cut the paper template first.
Друг, это можно делать на диодном лазере. У меня много таких работ сделанных на диодном лазере
What does the passthrough option do for the print?
It avoids double dithering due lightburn and uses the dithering from imagR :)
@@ImagR-Laser semi new to lasers what is dithering....
Its the dots that make it look like a image, its hard for me to explain but think like how a newspaper is a bunch of black dots really close to gether and that make a picture, that is dithering @charlenechoate17
hello everything is fine? My name is Pedro and I'm from Brazil. I discovered your website and loved it. I have an 80w co2 machine. A3 Topswindow plate. I open the website and do the treatment processes and save it for the acrylic material I use. Every time I print, the recording stops at one part and the following appears on the display: File error. And I can't do the recording again, I have to cancel it. Almost every photo I take shows this, could you help me with what it could be? Congratulations, fantastic videos...
Hello everything is fine? My name is Pedro, I have a co2 laser 80w controller board: Topwisdom A3. I love the channel's videos, I do the processing on imag-r, I choose the material and have it recorded. But when I go to record the photos, the recording stops halfway through and a message appears on the controller's display: "File error". This only happens when I record photos. Could you help me resolve this situation that is making me afraid every time I need to record a photo? Thank you very much
Really nice ! Material ?
Tile
Где вы покупаете такую плитку?
found it. it's just for US ..
Machine price
amazing program, too bad after my auto renewal I can't get it to accept my license. So now I can't use it.
Great concept and instruction apart from the AI voice… 🙂