WHY DO YOU NEED NEW DRIVESHAFTS? Jeep Wrangler JK Comparison And Adam's 1310 Driveshaft Install

Поделиться
HTML-код
  • Опубликовано: 22 окт 2024
  • In this video, not only do I replace my drive shafts, I also cut open the stock drive shafts to show just how thin the sidewalls of the driveshaft are.
    The install video is specific to a Jeep Wrangler JK, this one being a 2012 Jeep Wrangler JKU.
    The same process can be done for most of the Jeep Wrangler models.
    Check out Disciple Offroad for your Jeep needs!
    discipleoffroa...
    These drive shafts specific:
    discipleoffroa...

Комментарии • 17

  • @jfloydsea
    @jfloydsea 2 года назад +1

    I'm glad I swapped my drive shafts with Adam's before I installed the skid plates!

    • @4WDTrek
      @4WDTrek  2 года назад

      It was an absolute pain! I had to get an 8mm box end wrench on the cv bolts on the trans side and rotate the whole front drive shaft back and forth to get them undone.

    • @jfloydsea
      @jfloydsea 2 года назад +1

      @@4WDTrek I'm always suspicious if something doesn't go wrong any time I'm working on my Jeep. Something has to break or at least smash your knuckles on something!

    • @4WDTrek
      @4WDTrek  2 года назад

      @@jfloydsea I hear that! My jeep has plenty of blood spilled on it!

  • @alexdiaz6416
    @alexdiaz6416 3 месяца назад

    Very helpful video, good explanation.

    • @4WDTrek
      @4WDTrek  3 месяца назад

      Glad I could be of some help for you!

  • @BlackHawk295
    @BlackHawk295 2 года назад +1

    Dang I knew the stock shafts were thin but that's worse than I thought. It is neat to see how they corrugate it for some extra rigidity

    • @4WDTrek
      @4WDTrek  2 года назад +1

      I was very shocked to see how thin they are as well. And that section is where it is doubled up for the slip yolk.
      The corrugated section is definitely cool, but even with that rigidity, it seems pretty weak.

  • @full_metal2452
    @full_metal2452 Год назад

    2:27 A “double Cardigan”!?😮😮
    I bet it keeps warm when it’s cold out.

    • @4WDTrek
      @4WDTrek  Год назад

      Haha yeah yeah. My bad

  • @Chadh90
    @Chadh90 2 года назад

    What tires are you running?

    • @4WDTrek
      @4WDTrek  2 года назад

      Right now, 35s. But this is the first step of the progression to 37s. Which, if you subscribe, you will see in the next couple weeks all of the progression to the 37s

    • @Chadh90
      @Chadh90 2 года назад

      @@4WDTrek oh I meant the brand. They look like Milestar Patagonias? I'm shopping 37/38s and not sure which to go with for our climate yet. So many choices.

    • @4WDTrek
      @4WDTrek  2 года назад

      @@Chadh90 my bad! I have milestar patagonia tires. I love them! They may not be a 10/10 in a single category but I would say they are an 8/10 in all categories. If you are following the channel, big things are about to drop that you may be interested to see with my jeep ;)

    • @Chadh90
      @Chadh90 2 года назад +1

      @@4WDTrek yep I am following! Looking forward to seeing what you end up doing with your Jeep. Mine has turned into a decent project as well!

  • @marclutz2993
    @marclutz2993 2 года назад

    These are the worst thing I've ever seen! I couldn't believe what they were when i took mine apart! WTF Jeep!

    • @4WDTrek
      @4WDTrek  2 года назад

      The designs were okay for stock size tires for sure. But once you step it up, that's where they start to bend and twist