I just Finished replacing our front bumper with your new one that you painted and shipped us. It was for the 2010 Toyota Camry LE. Thanx to your video here I did it my self.. It was A Pleasant Experience doing Business with you.
Good informative video! Just completed my own bumper replacement. Only difference was had fog lights but that was super easy to figure out. Thank you! It helped a lot!
Great detail on replacement of front bumper. Can you please tell me where to get replacement bolts and screws I would need since repair shop did not replace a lot of the bolts and screw originally installed on my bumper and cow?
Thank you! The best place would be the dealership. The bolts and clip can be a dollar or more each but they would be the exact ones you need. Alternatively, you could match bolts at your local hardware store and the nearest o'rielly/autozone would sell the clips at the same price. But, they are "one fit all" clips and are the same price as the OEM clips. Good luck!
Great video, quick question...I like the shape of the 2010 bumpers, could they be swapped onto a 2007? Would the hardware match up? It looks like it would.
With any conversion, we tell our customers to double check every source. Camry/Toyota forums are great places to check. That being said, the hood and head lights look to be the same shape. The hood is 07-11. The fender liners might be different but they are made of thin plastic, so you could always modify them. The fog light holes are different, but I am not sure about the fog lights themselves. I would say it looks like they could be but please double check. Please let us know if you convert your bumper to the 2010.
@@ReveMoto Thanks for the response. i did look around and found that it is an exact replacement. I will need to change headlights and pigtails for the parklights and turn signal though. I will most likely be using your company for my bumper. Glad I found you guys....I'm in the Dallas area so homestate advantage.
Hello. Those are bumper brackets and there are a hard black plastic that is usually held on by a couple bolts on the fender. The bumper has tabs that will snap into the bracket. They often break on fender benders are easily replaced. The usually cost $30 and up at the dealership. You could probably easily find one a junkyard too. Good luck!
Good informative video. However, there were a couple of things that got me. I understand most likely the customer might be on a budget and didn't want to replace anything more than it would need. However, I felt that you should have gotten all of the proper clips and bolts needed to complete the swap. Makes it look half assed or more like a simple shade tree mechanic doing this at home in their own garage. And with you being a paint shop, why didn't you touch up the 2 chips on the front of the grill before reinstalling it? 🤔 Then I would have reordered the weather strip as well as the missing engine covers so it's back to factory settings. But again, if the customer didn't request that, I would have at least asked them if they woul like it restored. Otherwise I thought you and your assistant did a good job going slow enough to show all the particulars of disassembly and then reassembling it. She did an excellent job getting all the pertinent angles to see exactly what you were doing especially under the bumper and in the wheel wells. 😁👍🏻
Thanks for watching our video and leaving a comment! We appreciate the insight and letting us know what was helpful or what we could've improved on 👍. Definitely always trying to improve our angles, not always easy 😅 We actually aren't a body shop. We sell painted auto body parts and ship them for our customers to usually install themselves or take to a body shop for installation. This customer was actually in Houston, so we offered to install the ReveMoto painted bumper for free. But, yes, like you mentioned, they didn't want to buy more things for the car and just wanted us to do the swap so we tried to make the most of it 🙂
Install is fairly simple, but if you are trying to get the SE to upgrade your LE they are different bumpers. You will need other things to do the conversion. Go to www.ReveMoto.com
Hello. You can unplug them first but it may be a bit hard to reach. When you pull the bumper off, it's easier to take off the fog lights but just make sure the bumper doesn't come crashing down.
Do you guys sell the painted front valance too that comes with the SE models on the front bumper? I want to buy a bumper but I need that front spoiler too
Hello Brendan. We do sell it. We have yet to post it up on our website but I can get our team to do that this week. If you need the part, just give us a call or email us at sales@revemoto.com
My bumper is hanging down from each side near the tire. I can move it into place but it will not click into place. It will easily fall out of place and hang down again. Will a new bumper fix the problem or will the new one not click into place
There can be only 2 reasons for this. One, the bumper tabs are broken. If the bumper is sticking out, make sure those tabs aren't broken or bent. Two, check to see if the bumper retainer/bracket isn't broken. If this is broken, the tabs cannot snap into place. The retainer is usually around $20-60. If the tabs are broken, a new bumper is best or maybe someone could plastic weld the broken tabs for you. Thanks for watching!
Hi Chris, definitely! We have the information on the grill here, where you can get both the OEM or Parts Link number depending on the type of replacement you're looking for: www.revemoto.com/products/2010-toyota-camry-painted-grille? Hope that helps, and have a Happy New Year!
Hello and we're not 100% sure. Is this for a Yaris? We definitely recommend checking the Toyota forums. The general rule is, if the fenders, hood and headlight are the same for the xp13 and xp15, then you can. swap the bumpers. Please let us know if you need more help! Thanks for watching.
@@dropshot118 I don't think you NEED a to jack the car up but the Camry is pretty low. It definitely help to have more room to get under the bumper buy you probably could do without it. 🔧🚗
Hi. Technically, you could if you drilled the holes and attached screws. But, the SE bumper comes with the holes already, so it's much easier to just get the se bumper with valance.
We'd love to. We're trying to get our hand on the 2020 Sonata. In the meantime, we have the older model which may be very similar. Thank you for watching! ruclips.net/video/VYD4J294s3s/видео.html
Hey Susie! A typical job like this is about $150 and up. We are currently running a special for our local Houston customers, free install with purchase (7/17/2020).
If you are referring to the price of the bumper, you can find the link in our description. A typical bumper replacement can cost around $150 on average. The price differs between shops. Thanks for watching!
We try to price it competitively considering it's painted and shipped to you. And, we don't fold it up like a lot of other online stores do to make sure the bumper's paint stays in tact and won't start peeling a few months later. Sorry we can't do much about shipping, but you'll save installing it yourself. Or if you're in Houston, come on by and if you choose local-pickup we can save you some money there. Good luck with the fix and Happy New Year!
2010-2011 Toyota Camry Front Bumper Cover
Where To Buy: bit.ly/revemoto_10camrybumper
Other Parts : www.revemoto.com
This helped me a lot bro, did it all by myself
That's awesome! Glad it was helpful.
Thank you so much for the detailed bumper replacement video.
You're very welcome and thanks for watching. We appreciate the comment & glad it helped!
You're very welcome and thanks for watching. We appreciate the comment & glad it helped!
I just Finished replacing our front bumper with your new one that you painted and shipped us. It was for the 2010 Toyota Camry LE. Thanx to your video here I did it my self.. It was A Pleasant Experience doing Business with you.
Thank you so much! We love these types of comments and were elated everything worked out well.
Excellent demonstration. Thank you very much
Glad it was helpful! We love feedback so if there's anything else you'd like to see, please let us know :)
Thanks for the informative vid man it's gone help me out alot
We're glad we can be of help, thanks for watching.
I don’t understand the dislikes great video.
Thank you Sir! You can't win them all. Thank you for watching.
Thank you for showing. I learned from this.
Glad it was helpful!
Very good video! Thanks.
Thank you sir! If you need anything for your car go to www.ReveMoto.com
Man bro this is a awesome awesome awesome video thank you for this video very good detailed video 📹 👍 new subscriber
Woot Woot! Thanks for subcribing. We're glad we can help.
Good informative video! Just completed my own bumper replacement.
Only difference was had fog lights but that was super easy to figure out.
Thank you! It helped a lot!
We're glad we could help! Please subscribe if you haven't, it really helps us a lot. ✌
Great detail on replacement of front bumper. Can you please tell me where to get replacement bolts and screws I would need since repair shop did not replace a lot of the bolts and screw originally installed on my bumper and cow?
Thank you! The best place would be the dealership. The bolts and clip can be a dollar or more each but they would be the exact ones you need. Alternatively, you could match bolts at your local hardware store and the nearest o'rielly/autozone would sell the clips at the same price. But, they are "one fit all" clips and are the same price as the OEM clips. Good luck!
Nice ❤ How much for new blue 💙 color bumper price ????
Oh go hit up www.ReveMoto.com they can assist
Thanks fpr teaching man appreciate 🙏
That's why we do it, you're welcome and thanks for watching!
Very Helpful video. If you can mention screw driver specs and tools required that would be more helpful.
Thank you! We'll be better about mentioning that in the video instead of the description box. Take care.
Great video; thank you very much. Appreciate the detail
Glad it was helpful!
I'll be back to use this video soon
Thank you for watching, we'll be here!
Hey man thanks you video help me alot .
You're welcome. We're here help.
Great video, quick question...I like the shape of the 2010 bumpers, could they be swapped onto a 2007? Would the hardware match up? It looks like it would.
With any conversion, we tell our customers to double check every source. Camry/Toyota forums are great places to check. That being said, the hood and head lights look to be the same shape. The hood is 07-11. The fender liners might be different but they are made of thin plastic, so you could always modify them. The fog light holes are different, but I am not sure about the fog lights themselves. I would say it looks like they could be but please double check. Please let us know if you convert your bumper to the 2010.
@@ReveMoto Thanks for the response. i did look around and found that it is an exact replacement. I will need to change headlights and pigtails for the parklights and turn signal though. I will most likely be using your company for my bumper. Glad I found you guys....I'm in the Dallas area so homestate advantage.
@@The2MINwarning That is good news. We'll be here when you need the bumper and Texas is the best.
Great job!!
Thank you for watching!
What are the metal square things that attach the fender to the bumper called?
Hello. Those are bumper brackets and there are a hard black plastic that is usually held on by a couple bolts on the fender. The bumper has tabs that will snap into the bracket. They often break on fender benders are easily replaced. The usually cost $30 and up at the dealership. You could probably easily find one a junkyard too. Good luck!
Good informative video. However, there were a couple of things that got me. I understand most likely the customer might be on a budget and didn't want to replace anything more than it would need. However, I felt that you should have gotten all of the proper clips and bolts needed to complete the swap. Makes it look half assed or more like a simple shade tree mechanic doing this at home in their own garage. And with you being a paint shop, why didn't you touch up the 2 chips on the front of the grill before reinstalling it? 🤔
Then I would have reordered the weather strip as well as the missing engine covers so it's back to factory settings. But again, if the customer didn't request that, I would have at least asked them if they woul like it restored.
Otherwise I thought you and your assistant did a good job going slow enough to show all the particulars of disassembly and then reassembling it. She did an excellent job getting all the pertinent angles to see exactly what you were doing especially under the bumper and in the wheel wells. 😁👍🏻
Thanks for watching our video and leaving a comment! We appreciate the insight and letting us know what was helpful or what we could've improved on 👍. Definitely always trying to improve our angles, not always easy 😅 We actually aren't a body shop. We sell painted auto body parts and ship them for our customers to usually install themselves or take to a body shop for installation. This customer was actually in Houston, so we offered to install the ReveMoto painted bumper for free. But, yes, like you mentioned, they didn't want to buy more things for the car and just wanted us to do the swap so we tried to make the most of it 🙂
Do you a torque drill or even better a 1/4 drive cordless ratchet or 3/8 drive?
Thanks for video, I have only one question. Is Camry SE and Camry LE bumpers are compatible to each other? Not hybrid, regular models.
Install is fairly simple, but if you are trying to get the SE to upgrade your LE they are different bumpers. You will need other things to do the conversion. Go to www.ReveMoto.com
Quick question. My bumper has the fog lights at the bottom. Do I just need to unplug them first then the rest comes off with bumper or am I incorrect?
Hello. You can unplug them first but it may be a bit hard to reach. When you pull the bumper off, it's easier to take off the fog lights but just make sure the bumper doesn't come crashing down.
Thanks bro
No problem, we're glad we can help!
Do you guys sell the painted front valance too that comes with the SE models on the front bumper? I want to buy a bumper but I need that front spoiler too
Hello Brendan. We do sell it. We have yet to post it up on our website but I can get our team to do that this week. If you need the part, just give us a call or email us at sales@revemoto.com
i need afront bumber and front end
I need to fix my bumper too.
Give us a call at 281.561.5300 or email us at sales@revemoto.com
My bumper is hanging down from each side near the tire. I can move it into place but it will not click into place. It will easily fall out of place and hang down again. Will a new bumper fix the problem or will the new one not click into place
There can be only 2 reasons for this. One, the bumper tabs are broken. If the bumper is sticking out, make sure those tabs aren't broken or bent. Two, check to see if the bumper retainer/bracket isn't broken. If this is broken, the tabs cannot snap into place. The retainer is usually around $20-60. If the tabs are broken, a new bumper is best or maybe someone could plastic weld the broken tabs for you. Thanks for watching!
I love it.❤
Nice video would you happen to have the part # for that grill at the bottom
Hi Chris, definitely! We have the information on the grill here, where you can get both the OEM or Parts Link number depending on the type of replacement you're looking for: www.revemoto.com/products/2010-toyota-camry-painted-grille? Hope that helps, and have a Happy New Year!
My under engine cover was scraping the road and removed it as well
please help me: is the XP13 front bumper identical/compatible with the XP15 front bumper??
Hello and we're not 100% sure. Is this for a Yaris? We definitely recommend checking the Toyota forums. The general rule is, if the fenders, hood and headlight are the same for the xp13 and xp15, then you can. swap the bumpers. Please let us know if you need more help! Thanks for watching.
How much does it cost at your shop to replace the bumper and fender.
Thank you for watching and here is the link, bit.ly/revemoto_10camrybumper
thank you! such a handy man
Thank you for the compliment! We're glad we can help.
@@ReveMoto do I need to jack to screw on the under bolts? I have a 2009 camry SE
@@dropshot118 I don't think you NEED a to jack the car up but the Camry is pretty low. It definitely help to have more room to get under the bumper buy you probably could do without it. 🔧🚗
@@ReveMoto THANK YOU!
I need to also replace my reinforcement bar under the front bumper? Is that easy to do? what tools do I need?
Thank you....
You're welcome!
is there different between sport bumper and normal ?
The sport bumper has a lower lip on the bottom but the overall replacement is the same. Thank you for watching!
Can you put front valance on to LE model?Thanks
Hi. Technically, you could if you drilled the holes and attached screws. But, the SE bumper comes with the holes already, so it's much easier to just get the se bumper with valance.
The first screwdriver is a Philips head screwdriver
You're absolutely correct! Thank you for watching.
keep going
Thank you! We do our best. كـآسبر الـحارثي
Can you show how to remove a front bumper on a 2020 Hyundai Sonata?
We'd love to. We're trying to get our hand on the 2020 Sonata. In the meantime, we have the older model which may be very similar. Thank you for watching! ruclips.net/video/VYD4J294s3s/видео.html
How much do you usually charge for this ?
Hey Susie! A typical job like this is about $150 and up. We are currently running a special for our local Houston customers, free install with purchase (7/17/2020).
ReveMoto - Pre-Painted Auto Body Parts Thank you !
@@Susiebanks It's our pleasure.
Where is your workshop?
We are located in Houston, TX. Check out our website for directions. www.revemoto.com
Price bumper fixed
If you are referring to the price of the bumper, you can find the link in our description. A typical bumper replacement can cost around $150 on average. The price differs between shops. Thanks for watching!
👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻😘😘😘😘😘😘
أشكركم على الدعم. نحن سعداء للمساعدة.
'ashkurukum ealaa aldaem. nahn sueada' lilmusaeadat. (Thank you for the support. We're glad we can help.)
كموره يلد
I apologize, I could not translate this with Google Translate. Thanks for watching!
@@ReveMoto وت
أعتذر ، لم أتمكن من ترجمة هذا باستخدام ترجمة Google. شكرا للمشاهدة!
@@ReveMoto نييييقا
Wish 2010
It’s exactly like the 2010
Model to replace the bumper. I’d you need replacement parts go to www.ReveMoto.com
Dang front bumper is sky high at over $800 😬
We try to price it competitively considering it's painted and shipped to you. And, we don't fold it up like a lot of other online stores do to make sure the bumper's paint stays in tact and won't start peeling a few months later. Sorry we can't do much about shipping, but you'll save installing it yourself. Or if you're in Houston, come on by and if you choose local-pickup we can save you some money there. Good luck with the fix and Happy New Year!
Bro calm down do not just screws very fast you might broke the Toyota Camry
lol. We used a lot of "fast forward" in editing to make the video shorter in time.
Very helpful 👌
Glad it helped