Small tip to prevent water getting in the wooden floor at the hole for the rigging. Just drill a bigger hole then needed then fill it up with thickend epoxy and then drill the hole in the epoxy so the water can't seep in to the wood.
I’ve restored my own glass boat; a 1981 Rover Ox. It was extremely rewarding, but an incredible amount of work. Your vid contained in 15 min what took me 1.5 years to complete. Great job, and I can’t wait to see more!
I need to do some work to my old boat. I have cracks in the gel coat need repair. Keep making these type of repair videos, I'll be able to build a new boat. Love the content.
Would love to see the blister repair and exterior respray. My older Grady has a lot of small blisters very much like whats on this boat and I'm starting to research repair options.
A festool sander and vacum would be a perfect tool to add to your shop if you don’t have it already. Festool sanders and the vacuums collect about 95% of the sanding dust. They are expensive but well worth the money.
Always check for trailer damage. Excess overhang can belly the bottom near the transom. That acts like a big trim tab in the down position. You can't press it back out. The only way to fix it is to flip the boat and professionally re-glass the hull. The boat will nose dive and bow steer. Pick another hull to work with. There are plenty out there to choose from. Fiberglass stringer are a must for me.
How about cutting out the entire deck, drilling the stringers to check for rot, probably replacing them too, then building a new deck ? 06:50 rotten wood on the deck is a bad sign for whats under the deck. Leaving the hull/stringers uninspected is a mistake in my view. Also what was the transom wood's condition ?
@@nobody46820 Holds up great for many seasons, as long as you prep the surface good. My dad used it on his commercial salmon boat that had the anchor chain drag across it.
I kinda like the way the bow is laid out , room to throw ropes and beer cans , but I bet when you get going fast it blows it all out …. Including the leafs that accumulate
Hey fellas. I have a 88 Angler 19’ project I’ve been working on for almost a year and your videos are my bible. Lol. Love you material. Now I need to do the paint. Have a few questions.
Nice work once again! I really like your straight forward and practical approach to these projects; confidence inspiring for folks that are taking on projects on their own. I’m sure you and crew had some WTF moments as you discovered and had to fix the shoddy work done by someone else in the past.
you could have saved a bunch of work by using laminating resin. No need to sand between. Also, thinning resin with a little styrene will help the chop strand lay and conform. Also, you don't apply resin with the rolling tool. It is for running air out.... which you had a ton of. The camera shows it well
Another great video. What adaptor did you use so the steering lines could break out? I need to do just that on my boat and can only find and adaptor that caters fro a single fuel line. Thought about getting one of those and modifying it.
I’ve learned much from your Channel. What would it cost to you to do all that? I Wana re do my 83 proline 17’ cc and I’m not sure how much it would cost.
You should have used 1708, and glassed from the floor up the console. Its flexing side to side causing the cracks, not coming up from the floor. 6 inch wide roll of 1708, 3 inches on the floor and 3 on the console all the way around would prevent it.
Where can I buy that rigging tube adaptor for the hydraulic lines that is what I need!! Great work and information! I have learned so much from you. Thank you for your hard work.
What would you recommend for a boat that’s been bottom painted but is now kept on a trailer? I sanded the old bottom paint and put a fresh layer of paint on, but it’s flaking again. I don’t plan on ever keeping it in the water again.
@Three Aces I meant what coating should I use if I sand it down again? Should I roll on gel coat? Barrier coat by itself? Or is there another type of paint other than bottom paint?
Ditto on what the materials, fiberglass, resin, putty, sanding pads, etc. would run for this project? And how many man hours were spent on it? Saw the title and thought it was a way to cheaply restore a boat. Not.
This was funny and very informative at the same time I loved it. I've been doing this kind of work pretty much all my life God taught me from birth never have had to be shown what to do great job y'all
Totally depends on if you do it or you pay someone to do it. Do it yourself, around $1K in parts depending on the situation, pay someone, probably $2-4K
This is my first video from you. Is it safe to assume the 'Born Again' reference is of a Christian nature? If it is, you just earned a sub my brother :)
Ya`ll keep these videos coming, great work. Hard work shows and the rewards are PRICELESS God Bless. Never heard a man complain about the money he saves doing things himself.
Meu amigo, Eu não entendo uma grana do que vc está falando 👍 , mas Eu gostaria de saber de vc se tem condições de comprar um barco usado aí e trazer pra mim aqui pra o Brasil $ : ( ? )👍
Kapal yg sangat bagus,,,saya sangat ingin memiliki kapal sendiri tapi saya tidak memiliki uang untuk membelinya 😭😭😭😭😭😭 mungkin suatu saat nanti ada orang yang bermurah hati memberikan nya pada kuuuu🙏🙏🙏
Small tip to prevent water getting in the wooden floor at the hole for the rigging. Just drill a bigger hole then needed then fill it up with thickend epoxy and then drill the hole in the epoxy so the water can't seep in to the wood.
Smart!!
I’ve restored my own glass boat; a 1981 Rover Ox. It was extremely rewarding, but an incredible amount of work. Your vid contained in 15 min what took me 1.5 years to complete.
Great job, and I can’t wait to see more!
Got to say having 4 guys working as a TEAM ,you guys banged it out .Just redecked , glassed, gelcoated a 200 Aquasport alone took 3 months..
I need to do some work to my old boat. I have cracks in the gel coat need repair. Keep making these type of repair videos, I'll be able to build a new boat. Love the content.
I drove to Lady Lake Fl back in July. I took back roads hopeing to find a "project" boat to bring back to NC. No luck. I'll keep looking.
Would love to see the blister repair and exterior respray. My older Grady has a lot of small blisters very much like whats on this boat and I'm starting to research repair options.
Having worked in a boat yard, all I can say is you make it look SOOOO easy...
I was about to say that lol
A festool sander and vacum would be a perfect tool to add to your shop if you don’t have it already. Festool sanders and the vacuums collect about 95% of the sanding dust. They are expensive but well worth the money.
Always check for trailer damage. Excess overhang can belly the bottom near the transom. That acts like a big trim tab in the down position. You can't press it back out. The only way to fix it is to flip the boat and professionally re-glass the hull. The boat will nose dive and bow steer. Pick another hull to work with. There are plenty out there to choose from. Fiberglass stringer are a must for me.
How about cutting out the entire deck, drilling the stringers to check for rot, probably replacing them too, then building a new deck ? 06:50 rotten wood on the deck is a bad sign for whats under the deck.
Leaving the hull/stringers uninspected is a mistake in my view.
Also what was the transom wood's condition ?
I've always used a roll-on bedliner for my floors. Good non-skid surface and durable.
How does it hold up?
@@nobody46820 Holds up great for many seasons, as long as you prep the surface good. My dad used it on his commercial salmon boat that had the anchor chain drag across it.
@@robertlatham4951 Thanks!🙂👍🏻
I kinda like the way the bow is laid out , room to throw ropes and beer cans , but I bet when you get going fast it blows it all out …. Including the leafs that accumulate
Have you ever used flow coat? It has the wax in it and hardens better then gel coat but is still mixed and applied the same way
FAN good advice I use a fan from a gas furnace very aggressive. Have a guy mixing and one laying down good advice.
Love to guys grinding in short sleeve shirts right when you said suit up lol. Sometimes ya just accept the itch over cooking in a suit.
Hey fellas. I have a 88 Angler 19’ project I’ve been working on for almost a year and your videos are my bible. Lol. Love you material. Now I need to do the paint. Have a few questions.
Looks like the gelcoat was delaminating not the resin.
I was by you guys the other day but it was a whirlwind trip to Key West, wanted to stop in but could not make it happen . Keep up the great work guys
Show us that inside corner radius sanding tool please
what is the sander you are using in the corner at 10.45 ?
Looks amazing my friend. Keep up the good work
Wonder if they made a profit. Awful lot of labor costs for a relatively low cost boat
Excellent video. I have noticed that you Florida guys don’t do a lot of gel coat webbing on your boat floors like we do here in Texas.
Can you make a video about installing lights?
Nice work once again! I really like your straight forward and practical approach to these projects; confidence inspiring for folks that are taking on projects on their own. I’m sure you and crew had some WTF moments as you discovered and had to fix the shoddy work done by someone else in the past.
How much fiberglass resin was used on the repair?
you could have saved a bunch of work by using laminating resin. No need to sand between. Also, thinning resin with a little styrene will help the chop strand lay and conform. Also, you don't apply resin with the rolling tool. It is for running air out.... which you had a ton of. The camera shows it well
More overhauling boat videos, please. I am getting ready to fix an old boat. Thank you!
Another great video. What adaptor did you use so the steering lines could break out? I need to do just that on my boat and can only find and adaptor that caters fro a single fuel line. Thought about getting one of those and modifying it.
do you only need 1 layer of glass on the deck?
Please!!! Share the link to the regging adapter.
Absolutely LOVE the girl's hair whipping the camera lens at the end. That is ABSOLUTELY the desired intent of all that very hard work. Bravo!
Yes, months of labor to barely amuse a woman for a couple hours.
I’ve learned much from your Channel. What would it cost to you to do all that? I Wana re do my 83 proline 17’ cc and I’m not sure how much it would cost.
You should have used 1708, and glassed from the floor up the console. Its flexing side to side causing the cracks, not coming up from the floor. 6 inch wide roll of 1708, 3 inches on the floor and 3 on the console all the way around would prevent it.
You are missing out with not applying peel ply over fiberglass laying. You would reduce the dreading sanding part to a very absolute minimum.
Where can I buy that rigging tube adaptor for the hydraulic lines that is what I need!! Great work and information! I have learned so much from you. Thank you for your hard work.
What would you recommend for a boat that’s been bottom painted but is now kept on a trailer? I sanded the old bottom paint and put a fresh layer of paint on, but it’s flaking again. I don’t plan on ever keeping it in the water again.
@Three Aces I meant what coating should I use if I sand it down again? Should I roll on gel coat? Barrier coat by itself? Or is there another type of paint other than bottom paint?
Hey bro hope you’re ok during the crazy weather down there. Any chance you still got that lean post or any info on where it came from? Thanks 🙏
Hey thank you, yeah it's crazy right now, but no, on the leaning post, can't remember where it came from but boat's been gone for awhile
@@BornAgainBoating thanks for getting back to me no worries man stay safe
The boys really know what they're doing! No matter the circumstance, doing what's necessary to do things right. OUTSTANDING WORK!
Just Winterized my 340 sundancer here on Lake Erie, sad day. Love the videos!
Pricey but epoxy is the best resin wont do another unless its epoxy. Last one was 8 gallons of resin
I’ve always been curious how to fiberglass things. This video really helped, keep up the good work and thanks for all the pointers
Awesome content. Can you guys do more how to fiberglass/gelcoat videos. Everyone's got some spider cracks that need repairing
I'm in this stage, redoing a 18ft cat from Australia. New floor and tanks.
Ditto on what the materials, fiberglass, resin, putty, sanding pads, etc. would run for this project? And how many man hours were spent on it? Saw the title and thought it was a way to cheaply restore a boat. Not.
Hi I have a question I have a old 150 black Max’s and it is in Limp mode I am in marathon do you have any tips I checked the spark plugs
If it’s that old there is no limp mode no computer, what yr is engine.
Maybe bad plug wires or ignition coil
Nice work, a ton of info in this presentation.
It´s a bad idea wash the dust before apply fiberglass?
The Michael Jordan interlude! 👍😂 My God that's a lot of work.
I'm sure the wood transom and stringers fine.
WOW,WOW,WOW I need to come spend the summer 2 weeks with you
Prix de la rénovation??????😩
Another EXCELLENT presentation!
Glad you think so!
I would love to take a trip and help on these project boats
Very informative. Would be nice to have your thoughts, via video, of the best practice to combat gel coat fading. Cheers
Great job good content 👍 like always.
1973 20' SeaCraft must be worth a lot to someone.
I had the same thought...🤔
wow, what a great tutorial, thanks !
Love the content guys, keep up the good work!
This was funny and very informative at the same time I loved it. I've been doing this kind of work pretty much all my life God taught me from birth never have had to be shown what to do great job y'all
Glad you enjoyed it!
K - this is one of my favorite channels lol
Welcome aboard!
where you are buying the boats from?
Needed this video. Thank you.
Man that was alot of work only to do it again when the season is over but I guess you can make money with it in the meantime kinda paying for itself
How much does a job of this scale costs?
Totally depends on if you do it or you pay someone to do it. Do it yourself, around $1K in parts depending on the situation, pay someone, probably $2-4K
@@BornAgainBoating thank you
From nasty to beautiful! Awesome job Aaron and crew!
This is something I'd never do but thought it was very interesting regardless. You guys put some hours in on that project for sure and it looked good!
was that tom hume
Reminds me of a Dusky I want. Great video btw
"Blow the dust away...like the direction of your neighbors house with the windows open..." ROFL!!!
Please ask me which paint use name , raisen
Now that’s the way you do a good job
This is my first video from you. Is it safe to assume the 'Born Again' reference is of a Christian nature? If it is, you just earned a sub my brother :)
Great Video!
That boat is as old as I am. Man it's nice .
Ya`ll keep these videos coming, great work. Hard work shows and the rewards are PRICELESS God Bless. Never heard a man complain about the money he saves doing things himself.
Cheap boat restore. Boy is that the most loaded and relative thing I’ve read all day.
Impressive! 🙌🏼👌🏼
Towards your neighbors house when the window is open 😂😂😂
5:06 I just farted from laughing
Let me work with you. I like your innovation
🔥 job bro
Took my Corona stimulus checks and bought a new coosa floor + copper paint.. fun :)
thank for the video
Meu amigo, Eu não entendo uma grana do que vc está falando 👍 , mas Eu gostaria de saber de vc se tem condições de comprar um barco usado aí e trazer pra mim aqui pra o Brasil $ : ( ? )👍
too much work for me better buy an other boat
Damn this video is making me itch😆
Fun times
You guys are the best
Bring On Another Thousand! No matter how you slice it, boating is expensive hobby.
Lol definitely not pros doing the job if they’re using ryobi… don’t get me wrong I have lots of ryobi tools but I ain’t a pro
Wait I just two guys with out suit up 🤫🤭
you did a great job
Is that all you have to do!🙄
What’s a cheap boat? Asking for a friend
Do mine next haha
Easiest way to hide all the grinder marks Non skiddddddddddd lmaoo
Very Good
نحن مختصون في صناعه الفايبر جلاس والصيانه
Real men sand in their speedo
Kapal yg sangat bagus,,,saya sangat ingin memiliki kapal sendiri tapi saya tidak memiliki uang untuk membelinya 😭😭😭😭😭😭 mungkin suatu saat nanti ada orang yang bermurah hati memberikan nya pada kuuuu🙏🙏🙏