I found in walmart health drinks Nestle thick it up, beverage and food thickener. If you cant find Thick it bran this is another bran found at the Canadian Walmart. For all the Canadians that cant find Thick it powder in a store. It a usa product.
Hey Nokomis 🤩 You can find the transfer tape here: go.crafty.net/transfertape Thanks so much for watching! 🚨 👉 Don't forget, if you're a member of the Crafty community, you can use your exclusive discount code for 10% off your purchase from 143Vinyl. 😉
Hi Michael I live in Australia and can’t buy Thick it however it’s seems to be the same as a baby food thickener or a cornstarch can I use that instead ??
Yes! Mix 1 tablespoon cornstarch with 100mls of water (a little less than half cup) in microwave safe dish. Microwave for 90 seconds stopping frequently to stir so mixture does not bubble over. Remove from microwave and let sit to cool and thicken up, then add 1 tablespoon Ammonium Chloride. Not sure about baby food thickener, if you try it please let me know how it works out. Someone named Noe Charbonneau originally posted the above cornstarch recipe. Try it, you will not be disappointed! You do not want Thick-It, it is expensive compared to cornstarch! Pretty sure Michael just wants to use his stash and it is less steps than cornstarch, so I would do same if I already invested in it. 100% better way to go it cornstarch though.
I wonder if the heat press would get hot enough to activate the chemical reaction. I wouldn't close the lid, but it might be worth a shot. Kind of like drying a fresh sublimation sheet before pressing it. Or maybe you could close the lid since it's a cutting board and its thickness would be less likely to warp.
Hey Stephanie! 🤩 So the heat press won't be hot enough to activate the chemical reaction unless it's closed. I've tried doing this before using the heat press closed on the wood and it did not produce very good results. The areas didn't darken very much and the board warped from the heat.
Hey Susan 🤩 that's a great question! I've tried an embossing heat gun and not only did it still char, but it took well over half an hour. If anything, I would use a regular heat gun with an adjustable temperature. You can also use a magic eraser to help remove any areas that charred too much.
@@mrcraftypants thank you for getting back to me. I think my husband may have an adjustable heat gun. If he does, I'll give it a try and let you know 👍
🚨 *Get this Crafty SVG Design* 👉 go.crafty.net/santa
What the alternative to the thick it stuff. Is it corn starch????
I missed the live, however did not miss the rewind. Love it Michael. Looks so beautiful. Thank you for your tutorials and expertise. 😍🥰💜
Definitely learned something new! Thanks Michael!
Replay squad, AGAIN... I love it, you are a great teacher thank you!!
That is so sweet, thank you Victoria for saying that! It means the world to me 🤩
Amazing video!!!
Love this.
I love wood burning projects :)
Aren't they cool?! 🤩
I can't wait to try this Michael! Thank you so much that is so cute, my grandchildren will love it.
I found in walmart health drinks Nestle thick it up, beverage and food thickener. If you cant find Thick it bran this is another bran found at the Canadian Walmart. For all the Canadians that cant find Thick it powder in a store. It a usa product.
Love it!
Thank you Mary! 🤩
Love it, not sure I could trust myself with a blowtorch though lol x
Replay squad …. Oh geez he has a blow torch?!?!
Love this. So clear and inspiring. Thanks
Loved this project but my hubby said no way with the heat torch. I'm dangerous with the torch lighters. bahahahaha!!!
Well you can always just use a heat gun ;) LOL
Love all your videos!
We're so pleased you are enjoying our videos 🙂
That is so awesome and thank you so much for sharing the recipe for your wood burning paste. Can't wait to make something fantastic. 😄Linda
That is super neat. Can you heat it up with the easy press or a larger heat press?
Is the thick it just corn starch.
How do you keep the wood from cupping when you apply the heat? Every time I heat mine up the wood cups badly
I’m obsessed with this project!! Where can I find the transfer tape?
Hey Nokomis 🤩 You can find the transfer tape here: go.crafty.net/transfertape
Thanks so much for watching!
🚨 👉 Don't forget, if you're a member of the Crafty community, you can use your exclusive discount code for 10% off your purchase from 143Vinyl. 😉
Hi Michael
I live in Australia and can’t buy Thick it however it’s seems to be the same as a baby food thickener or a cornstarch can I use that instead ??
Yes! Mix 1 tablespoon cornstarch with 100mls of water (a little less than half cup) in microwave safe dish. Microwave for 90 seconds stopping frequently to stir so mixture does not bubble over. Remove from microwave and let sit to cool and thicken up, then add 1 tablespoon Ammonium Chloride. Not sure about baby food thickener, if you try it please let me know how it works out. Someone named Noe Charbonneau originally posted the above cornstarch recipe. Try it, you will not be disappointed! You do not want Thick-It, it is expensive compared to cornstarch! Pretty sure Michael just wants to use his stash and it is less steps than cornstarch, so I would do same if I already invested in it. 100% better way to go it cornstarch though.
I wonder if the heat press would get hot enough to activate the chemical reaction. I wouldn't close the lid, but it might be worth a shot. Kind of like drying a fresh sublimation sheet before pressing it. Or maybe you could close the lid since it's a cutting board and its thickness would be less likely to warp.
Hey Stephanie! 🤩 So the heat press won't be hot enough to activate the chemical reaction unless it's closed. I've tried doing this before using the heat press closed on the wood and it did not produce very good results. The areas didn't darken very much and the board warped from the heat.
@@mrcraftypants Good to know! Thank you for the follow-up, Michael.
I’m new and want to learn more
What kind of vinyl did you use? Permanent or removable?
so would a butane torch work?? cuz i got 1 awhile ago wen i was tryin out resin but i dont use resin anymore and its just sittin there lol
So is the picture you show in the lead up to this video after you used the magic eraser?
Ammonium chloride is harmful if swallowed is it not?
Another lovely video. You using a blow torch always worries me. But thanks.
Thank you Kristen 🤩 Don't worry about me though... I've got all the fire safety equipment close by if I ever need it 😉
The blow torch seems to chat other areas too. Can we use an embossing heat gun.?
That’s what I came here to ask! Maybe I’ll try it anyways!
Hey Susan 🤩 that's a great question! I've tried an embossing heat gun and not only did it still char, but it took well over half an hour. If anything, I would use a regular heat gun with an adjustable temperature. You can also use a magic eraser to help remove any areas that charred too much.
@@mrcraftypants thank you for getting back to me. I think my husband may have an adjustable heat gun. If he does, I'll give it a try and let you know 👍
Where can i get the recipe for mixture of Thick it?
I really want to try this. I don't have a torch, but I do have a heat gun. But I'm also scared I'm gonna burn my house down. LOL
Did I miss it.
Better late than never 🤩🤩
It waste of time to ask any question. He does not answer.