LOL, TK you are a bloody legend, mate! I can only imagine how dangerous you would be with some proper tools, haha. I watched all of your E300 upgrade videos at least twice and it inspired me to do the same. So I'm now upgrading to a 1000watt hub motor with dual disc brakes. Thanks for the entertainment above and beyond most scooter videos!
I had to re visit this vid. My upgrades are slowly progressing as the parts come in. I decided to use the X tech hydraulic cable pull brakes that everyone uses on the other scooters out there. It’s going to be a tight fit. Especially on the front. I have to mod the wheel hub to get it to work and custom make a bracket to get the calliper on the fork. Using a 1500w brainstorm speed controller. It takes up the whole battery/electronics tray. Batteries are going to have to find a new home hahah. I am tweaking setting on the controller to get the 6384 BL out runner to work well. It works just not super smooth. Custom mount for that needed too. I opened up a can of worms on this build. But it is enjoyable to see what I can manage! Lol should be sweet when it’s done.
Hi Mate, first off great electric scooter videos I have just spend the last 2 hours watching all of them. I have a electric longboard that has a dead bms no big problem got a new one done. The speed controller talks to the bms using serial and tells it to limit amps (making it slower or faster). I would love you to have a look at the pcb and see if you can figure out how to just run it full maximum amps all the time, I don't care about the options for being able to switch speed (amps) modes via the remote.You seem more than clever enough to figure this out. Thanks in advance
Thanks for watching! Sounds a little tricky if it’s using serial communication. You could try and fool it by fattening up the current shunt to throw the readings off, but it’s not an exact science.
There's actually an adapter you can get for pretty cheap that simply replaces the drum housing (it screws off) so you can mount a generic rotor. Great job though.
@@WhatUpTKHere I want to recommend this product at Amazon.com RichBoo Road Cycling Disc-Brake Rotor Adapter, Rear MT-Disck-Brakes Pads whih Bolts and Cable by RichBoo Learn more: www.amazon.com/dp/B07N1HM13S/ref=cm_sw_em_r_mt_dp_U_Q-7lDb7DJ944Y
LOL :) Great series! I just binge watched it, so this upload came at a great time. It was good to watch you getting stuck into the motor controller guts. I wonder at what stage the original motor got fried. (It could have been back when you bypassed the relay, after getting the new lipo pack; if the motor's windings had begun to short out, the increased current would have popped the original MOSFET for sure.) My mate sold me his spare scooter (Viron 36v) recently so I could get involved and help him upgrade the electrics. Our first step will be a lead acid to lithium battery upgrade. I'm probably going to build my pretty expensive (40+ lipo cells). Anywho, thanks for the uploads, and hi from the UK.
It doesn’t take much for it to make noise, so it might be worth adjusting it back and forth to see if it improves any. Other causes may be that the bearings in the motor or rear wheel are shagged.
@@WhatUpTKHere my guess is the bearings since they are original and 3 years old, but my sprocket also had to be welded to the motor since it spun and there no way to really adjust anything
any links to where I can get the batteries and charger please? I'm running the same motor but only have 2 mobility scooter batteries so 36v 500w motor with 24v 40ah batteries. Not terrible but not quick enough
Great video...props to whomever is behind the camera!...makes me want to be there and get muddy... ditto great job on the disc, relate to the broken drills what a pisser! I missed something, what is the wire in your right hand in the video, kill switch??? keep it coming...I can"t stop smiling!!!
Overall pretty good video. Looks like you might need to brush up on your drill bit study. I've been there, where you really need to drill a hole and then the bit snaps. McMaster-carr has lots of bits. Then there's you trying to use a Dremel abrasive cut off wheel on hardened steel.. that was pretty funny. Looks like your project came out pretty well overall. (+1)
TK, on one of your videos couple of years back now I guess, you upgraded the motor sprocket from 11 to 15 tooth, where can you get them I've been looking for ages thought I'd bought one when it turned up it was for a moped. Aaaarrrgh 3 weeks I waited for that.
Wow i build mine like 2017 with 800watts of motor. I purchase at ebay the scooters got it from craigstlist the only problem i have is the battery. That why I stop doing it now i realized I should threw mine away😂
TheseRazors are INTERESTING. I have ebikes. These cost practically nothing. Upgrade to lithium. THAT'S ROCK AND ROLL. great to go to the store. Ebikes get stolen. With this you can hide it or carry it with you. THESE HAVE INFINITE POTENTIAL No jumping curbs LOL
Good Idea, have you thought about replacing the chain with belt? Since the chain is very very noisy on all E300s. Also interesting happened to my Razor, I rebuilt it 36V(control unit, batteries and throttle) but after a month of driving - my motor shaft BENT!! I have original MY1016.
Bent motor shaft? That’s a pain! Key to a quieter chain is alignment. Mine is noisy as heck when the sprockets aren’t straight with each other. Never perfectly silent but can be a lot better.
How fast you get out of that then. Iv just bought a 48 Volt 1600 watt chaos scooter. 27 mph it goes and feels more. For £520 on finance for 12 months, if you have bad credit then expect to pay £150 to £200 then monthly instalments. Don't get caught by the police.
These aren't good nodded TOO much Not designed. Buy ebikes kit. BATTERIES ARE THE MONEY. don't use lead acid Heavy No power or capacity. Lithium Unlimited
LOL, TK you are a bloody legend, mate! I can only imagine how dangerous you would be with some proper tools, haha. I watched all of your E300 upgrade videos at least twice and it inspired me to do the same. So I'm now upgrading to a 1000watt hub motor with dual disc brakes. Thanks for the entertainment above and beyond most scooter videos!
That sounds awesome! Front brakes would be wild.
Thanks for the kind words!
I had to re visit this vid. My upgrades are slowly progressing as the parts come in. I decided to use the X tech hydraulic cable pull brakes that everyone uses on the other scooters out there. It’s going to be a tight fit. Especially on the front. I have to mod the wheel hub to get it to work and custom make a bracket to get the calliper on the fork. Using a 1500w brainstorm speed controller. It takes up the whole battery/electronics tray. Batteries are going to have to find a new home hahah. I am tweaking setting on the controller to get the 6384 BL out runner to work well. It works just not super smooth. Custom mount for that needed too. I opened up a can of worms on this build. But it is enjoyable to see what I can manage! Lol should be sweet when it’s done.
That’s a lot to cram in, sounds dope!
Yay the scooter is back 👍
Feels good!
Nice manicure. Thanks for making these videos, too many people do it the normal way, you do it the awesome way.
Thanks for watching!
Stomp like on this comment if you’re still juicing up Razor Scooters in 2021 and Ya Boy TK is showing you the way.
Happy to help brutha!
That's what I am talking about... Sweet! Crap-tackular. I gotta borrow that one.
Hahaha, heck of a word
Hi Mate, first off great electric scooter videos I have just spend the last 2 hours watching all of them.
I have a electric longboard that has a dead bms no big problem got a new one done. The speed controller talks to the bms using serial and tells it to limit amps (making it slower or faster). I would love you to have a look at the pcb and see if you can figure out how to just run it full maximum amps all the time, I don't care about the options for being able to switch speed (amps) modes via the remote.You seem more than clever enough to figure this out. Thanks in advance
Thanks for watching!
Sounds a little tricky if it’s using serial communication. You could try and fool it by fattening up the current shunt to throw the readings off, but it’s not an exact science.
Please use your influence to promote wearing a helmet. Thanks.
Not a bad idea, gotta protect the head
@10:34 Hey, you moved the tensioner on the chain! Good one
Haha, I still get comments about that daily
Razor your missing out of easy money make kits like this and sell them all day long
Would be dope. I think there’s a hub adapter you can get online but you still gotta do your own caliper Mount.
Great thing about Razors old Lithium batteries work. OLD batts are bad for ebikes weak
Yeah you want strong ones
There's actually an adapter you can get for pretty cheap that simply replaces the drum housing (it screws off) so you can mount a generic rotor. Great job though.
Sounds cool, link?
@@WhatUpTKHere
I want to recommend this product at Amazon.com
RichBoo Road Cycling Disc-Brake Rotor Adapter, Rear MT-Disck-Brakes Pads whih Bolts and Cable
by RichBoo
Learn more: www.amazon.com/dp/B07N1HM13S/ref=cm_sw_em_r_mt_dp_U_Q-7lDb7DJ944Y
@@WhatUpTKHere www.electricscooterparts.com/discbrakes.html Scroll to the bottom of the page. It's item BRK-142
Don't want stuck throttle either bypass or buy 24 36 ebikes controller $15. Serious not the matchbox they supply Rock on!!!
Yeah stuck throttles are scary beans
What's with the green nail varnish??? Cool upgrade
Matches the shirt
@@WhatUpTKHere lol !
I were nail varnish sometimes on my toes but no one knows 🤔
Cool upgrade and awesome/awful drilling technique-- you're the Rich Rebuilds of scooters-- Liked and subscribed 👍! 👍! 👍!
Thanks for watching ;D
LOL :) Great series! I just binge watched it, so this upload came at a great time. It was good to watch you getting stuck into the motor controller guts. I wonder at what stage the original motor got fried. (It could have been back when you bypassed the relay, after getting the new lipo pack; if the motor's windings had begun to short out, the increased current would have popped the original MOSFET for sure.)
My mate sold me his spare scooter (Viron 36v) recently so I could get involved and help him upgrade the electrics. Our first step will be a lead acid to lithium battery upgrade. I'm probably going to build my pretty expensive (40+ lipo cells). Anywho, thanks for the uploads, and hi from the UK.
Glad you enjoyed it! It’s definitely been a long road. Keen to do more.
Sounds cool, good luck with the build ;D
In the next video, TK nurses a broken leg at local hospital. Hahahah :) love it. Wear a helmet plox.
Good advice :)
Haha looks fun . I need to do the brake up grade
Do it! My fave mod, skids are legendary
😂 sick mod. Glad to see another vid after all this time. Moar
Lots more scooter stuff happening soon ;D
@@WhatUpTKHere yesss. I have followed all your vids for some time now, you do a great job and I love watching
GREAT!
Bicycle helmets PLEASE! Head injuries do Not heal and can be deadly!
Take care
Good advice!
I'm having excessive noise and vibration from my chain drive on my scooter and the chain drive is fairly straight. Any suggestions?
It doesn’t take much for it to make noise, so it might be worth adjusting it back and forth to see if it improves any.
Other causes may be that the bearings in the motor or rear wheel are shagged.
@@WhatUpTKHere my guess is the bearings since they are original and 3 years old, but my sprocket also had to be welded to the motor since it spun and there no way to really adjust anything
@@itsadraw589 ah yep, sounds like there's been some issues there already.
any links to where I can get the batteries and charger please? I'm running the same motor but only have 2 mobility scooter batteries so 36v 500w motor with 24v 40ah batteries. Not terrible but not quick enough
Fun bikes website.
I went hobbyking, as described in episode 5, but if I can get the $ together, I want to review the high capacity ebike batteries on eBay.
Done
Do you think you could replace the battery and motherboard in the e300 with the battery and motherboard from a Xiamoi m365?
Possibly! I’m unfamiliar with that hardware, unfortunately
Thanks for the reply, I'll look into it a bit more as I'm wanting a scooter that can last longer.
Razor are you paying attention do this
Were the nails supposed to match the shirt?
Ha!
very cool
;D
Great video...props to whomever is behind the camera!...makes me want to be there and get muddy... ditto great job on the disc, relate to the broken drills what a pisser! I missed something, what is the wire in your right hand in the video, kill switch??? keep it coming...I can"t stop smiling!!!
Yep, as per the earlier episodes, that’s an emergency cutoff wrapped around the wrist :)
Thanks for watching, glad you enjoyed it!
Overall pretty good video. Looks like you might need to brush up on your drill bit study. I've been there, where you really need to drill a hole and then the bit snaps. McMaster-carr has lots of bits. Then there's you trying to use a Dremel abrasive cut off wheel on hardened steel.. that was pretty funny. Looks like your project came out pretty well overall. (+1)
McMaster Carr don’t ship here which really sucks. Thanks for watching!
TK, on one of your videos couple of years back now I guess, you upgraded the motor sprocket from 11 to 15 tooth, where can you get them I've been looking for ages thought I'd bought one when it turned up it was for a moped. Aaaarrrgh 3 weeks I waited for that.
Look on eBay and alibaba!
This is great and all but what do you do when you need to change the tire
Like the original setup, you gotta take it all apart.
Excelente!!
Thanks!
Wow i build mine like 2017 with 800watts of motor. I purchase at ebay the scooters got it from craigstlist the only problem i have is the battery. That why I stop doing it now i realized I should threw mine away😂
Sounds like you had fun!
TheseRazors are INTERESTING. I have ebikes. These cost practically nothing. Upgrade to lithium. THAT'S ROCK AND ROLL. great to go to the store. Ebikes get stolen. With this you can hide it or carry it with you. THESE HAVE INFINITE POTENTIAL No jumping curbs LOL
Yeah, haha. Gotta watch them curbs.
Good Idea, have you thought about replacing the chain with belt? Since the chain is very very noisy on all E300s.
Also interesting happened to my Razor, I rebuilt it 36V(control unit, batteries and throttle) but after a month of driving - my motor shaft BENT!! I have original MY1016.
Bent motor shaft? That’s a pain!
Key to a quieter chain is alignment. Mine is noisy as heck when the sprockets aren’t straight with each other. Never perfectly silent but can be a lot better.
I had a similar problem but instead of a bent motor shaft, the sprocket spun and welded itself to the shaft
Top speed? Voltage ?
40km/h on a good day; check out the rest of the series for more details ;D
How fast you get out of that then. Iv just bought a 48 Volt 1600 watt chaos scooter. 27 mph it goes and feels more. For £520 on finance for 12 months, if you have bad credit then expect to pay £150 to £200 then monthly instalments. Don't get caught by the police.
That sounds awesome. This thing hits 30-35km/h.
I’m tempted to overvolt it with a 12S lithium pack and would probably hit 40-45km/h.
What size is that rear wheel?. By the way good work.
Thanks! Its whatever’s standard on the Razor E300, 9” in diameter approximately.
Great mods dude! BTW, doesn't your friend 10:40 have an island he should be protecting?
I wouldn’t wanna trespass on any island that man was protecting!
@@WhatUpTKHere I know it's been a year lol... but I was making a "Lost" reference... friend looks kinda like Hurley.
MightyScooterMods...
"Mad skids"
Spotted the chopped sticker, I see ;D
I can’t take you seriously with metallic green nails 😮
That's really weird! I hope you can grow from this.
@@WhatUpTKHere I apologise for the stupid comment
Build a 2 wheel drive scooter using motor wheels from a 'hoverboard'.
Good call. I have a project in mind for just such components, if I can source them. Something with a few more wheels though... ;D
I was given a Razor I'm LITHIUM IT these don't need many amps so tear apart laptops. Solder and RIDE RIDE RIDE EZPZ
Neoemn! Love lithium power
These aren't good nodded TOO much Not designed. Buy ebikes kit. BATTERIES ARE THE MONEY. don't use lead acid Heavy No power or capacity. Lithium Unlimited
Lithium is glorious!
Next time slow your drill speed down that's why your bits keep breaking
Haha, I may be a little over eager
WOAH THATS FAST I HAVE EXACT SCOOTER
Yassss!
THANKS TK
i hate razor scooters is cheap and crappy quick volt 10 zero 10 and dual tron are cool scooters
Thanks for watching!
so next time no burn outs and ride home
Ha! Probably good to save some battery to save the long walk, hey :P