HOW TO MSI MAG Coreliquid 360R & 240R AMD AM4 & AM5 Install Guide
HTML-код
- Опубликовано: 30 июл 2024
- Make sure you watch the whole video before asking questions :)
MSI MAG Coreliquid 360R
US: amzn.to/3kyptPL
UK: amzn.to/31Kqo6T
BECOME A MEMBER: grsk.co/ytjoin
FLOATPLANE: grsk.co/floatplane
DISCORD COMMUNITY: grsk.co/community
PATREON: grsk.co/patreon
MERCH STORE: grsk.co/store
Some Cameras & Gear Used To Make These Videos
►Panasonic Lumix GH5
amzn.to/2mNQAfr
►Fujifilm X-T2 - amzn.to/2DyjQ1f
amzn.to/2DyjQ1f
►Panasonic 12-35mm f/2.8 II
amzn.to/2oriBVW
►Metabones SpeedBooster EF - MFT 0.71x
amzn.to/2twAF4H
►RodeLink FM Wireless Filmmaker System
amzn.to/2yKuI6b
Chapters
0:00 - Intro
0:47 - THIS IS NOT A REVIEW!
1:44 - Common Questions
3:44 - Quick Unboxing
6:25 - AMD Installation
6:53 - Attaching The Mounting Hardware
8:00 - Radiator & Fan Installation
9:04 - Mounting The Cooler To The Motherboard
10:10 - Wiring And RGB Guide
12:44 - Things To Note/Optional
13:05 - Cinematic Mode
14:17 - Conclusion
14:48 - Subscribe!
We earn commission from any purchases made with the Amazon Affiliate Links.
#msi #coreliquid #guide 
Наука
This video is 10 times more useful than the official instalation guide you get from the box.
I scratched my head because the light just didn't want to turn on even after I make sure I already plug all the argb fan to my argb hub.
Figured out a solution yet??
Amen. There are parts in the bag that aren't mentioned anywhere in any of the instructions.
Normally it would mean you need an app to control the RGB if the motherboard isn’t RGB ready
@@vortexseziks1013 ,
I really appreciate the effort that is put in these videos and I really like how you answered common questions in the beginning it really helped 👍
My favorite episode was the XPG battlecruiser build , so much so I built my new pc with that case and love it .Thanks for these videos and keep up the awesome work!!🔥🔥
The Q and A is amazing, all the questions answered quick and simple. keep up the good work👍
L
Will the pump work on a old motherboard like a msi 970 or a 990? If so, where would I plug it in?
which RGB control app do you use?
i like how you have so many motherboards in the background
is there a proper installation to the mag core like the NZXT krakens?
Had Problems with my cable lengths, until i saw the splitter cable, thank you, was helpful!
I have the shorter 240 version. Had to put screws in first then take them out before I could install it in case, Great video.
is it a good cooler?????
not even msi installation vid was this good. Thanks so much, saved me from falling apart when doing my first build and couldn't figure out how to connect it
It literally took me a WEEK to find this video. The only reason I *knew* it was pump up, was because other friends guided me. (It was my first AIO install.)
As you said, their website, install guide, and videos don't tell you the correct way.
i can’t mount the radiator onto the cpu and i’m doing the same exact steps as this video and others. it’s like an inch away from the cpu and i can’t tighten the screws. any help?
@@awstin2440 Yes, I had the same problem flip the mounts that click on to the mounts if you have an AMD one, the videos say to do it the other way but it didn’t work for me so I tried the other way and it worked and I could tighten the screws
@@awstin2440 they are the seats that click onto the mount, just flip them over and then try
@@snack6624 yea haha i ended up figuring that out xD even then it’s still a little hard to install ngl
That intro music 😭👍
So good..i keep replaying that part 😭👍
Hey there!
Thanks for the tutorial which helped me a lot with my new build.
One question though: 1 of my 3 fans (360R) is not in sync with the other fans. I've plugged the female RGB-header to the male CPU-cooler header, the female CPU-cooler header to the mainboard (JRAINBOW) and daisy-chained the other fans together. And now I've got: fan 1 and cpu-cooler: in sync; fan 2 and 3: in sync. Did I create two daisy-chains?
I can't put into words how much this video helped me
Hey i have a simple question, with a gungnir 110r its possible to just put the rgb pump câble to the controller rgb behind and not on a Jrainbow header ?
Does it fit well on the front
Made an otherwise scary installation very simple. Thank you.
Es imposible poner las mangueras abajo.
Can you use the noise reducer cable as an extension cable for the pump? Specifically the pump_fan1 connection. My cable doesn’t reach it without.
So isn't it a bad idea to have the AOI pipes on the top of the cooler stack? won't you be pulling warm water into the inlet pipe as hot water rises to the top, and also I always thought that bubbles could form there over time and create pockets of air. And your fans are drawing air into the case, but is blowing warmed air into your case a good idea?
I was thinking of getting one for a new build where I’m using the o11 dynamic so this is good as some of them are slightly different with rgb software use
I'm just recently doing a brand new PC build with this exact motherboard and cooler but I've heard a lot of different ways to install the radiator. I've been told that the best way is to have the tubes coming off the radiator installed at the bottom instead of the top because of eventual air that will get into the system down the line. What are your thoughts on this.
i think hot air rises
where do i plug the pump header on an msi b450m mortar max motherboard? it doesnt have a pump header. also, where do the rad fans go on the motherboard (sys fan or cpu fan)?
10:40 can i connect the cable intro cpu_fan or normal fan? my motherboard is Asrock p67-pro3
Great video Nick, I'am in the process of building a PC for my nephew and will be using this AIO and it will be the first time installing an AIO in over 10 years. The first time I installed one didn't have all the bling so this guide will be a great help.
Thanks for the video. I followed the whole thing to install my MSI 360r. It's keeping my 5800x under 80c at peak boost, constant gaming load around mid 60s.
How is it now? So I know it can last up to a year, I’m seeing some bad reviews when it comes to the time it last
Great install guide, Mr. Gear Seekers! I may buy this cooler but not sure yet, but if I do I will follow this video!
Does the pump need 12V or can i reduce it? And if yes, what voltage do you recommend? sry for bad english.
can you make some comparison with the other cpu aio's like nzxt, deepcool and arctic?
AND NOCTUA DH 15
Arctic AIO are the best on the market, and the prices are unbeaten
@@dunnobutwayne Actually SilentiumPc aios are offering almost same performance and they are actually cheaper
@@nicksjuice699 yeah i just want to see how it compares with noctua, I have the big ass heatsink but switchign to watercooling next rig
For those that are concerned Peel Corp makes an unannounced visit at 9:04 👍🏻👍🏻
hello appreciate ur hard work. but, my question is "can i mount the fans to the opposite side of the rad where the pump is located" and will the 240mm version fit in the h400i with a 2060 super strix. i would like to get some help from you
2 questions. If i use my own fans do they all need to be hooked up to the same circuit as the water block or does it not matter? I have a dust screen in front of my fans so if I install it the same way in this video I doubt my dust screen will go back on with them like that so does it matter how it’s installed?
So if the pump is in the rad, does this mean that it's actually best to bottom-mount this AIO ? To keep the pump at the lowest point.
Yeah That should be the case That's what I did while bottom mounting it in my nr200p
Best installation guides out there! Thanks again GS :)
Questions answers right at the start, thanks man great way to format the answers
you installed the fans so they face out but can i install the fans so they are facing inside towards the cpu. if you know what i mean?
Man I spent too much time trying to figure out the ARGB wiring... Thanks for this video :)
Keep in mind that the 240 mm radiator does not come with a threadripper mounting plate
Hi, since in planning to connect all my argb fans to 1 3pin header. Im wonderin if by any chance do you khow much Amp does one fan produce? Max capacity of my header is 3A.
Is there a difference how you turn the pump? There is a small triangle and small circle where I could put the top part of the pump. Where i should put it ?
Finally you uploaded a video about the msi core liquid ♥️, but I hope you can make a guide for the 240r for Intel.
He did!
Stupid question, for the 240r , you can install the radiator at the top side of the case instead at the front as shown here?
If the radiator is installed on top of the case and the fans are below the radiator, should the fans have to take air from the outside to the inside of the case or vise versa?
Excellent installation video...I recently installed the 360R V2, and the radiator pump seems to always spin at ~4200 RPM regardless of how I set the temp curves. Is there a way to get the pump under control and not spinning at max all the time?
Hey there what happens if my motherboard doesn’t have a ARGB header would I still be able to use this cooler? And does this mean that the cooler would work just without the rgb function?
I just installed it that way but mystic lights wont recognize it... help
@SharQ Thank you for your help!
Ok, so from everything I've read/watched on AIO installs should the pump not actually be at the lowest point of the loop to avoid the air collecting there, meaning should you not have put the rad the other way around? Or is it different with this system as the pump itself is actually in the rad and therefore the air would escape anyway?
I have exactly the same question, could you find out?
Suposedly if the pump itself is lower than the highest point of the circuit it will be alright. In this case it should be fine as the pump is a bit below the top of the radiator tubes.
@@diogosimao3212 I believe once the orientation is set, shake lightly but for some time to let the air move to the highest point and out of the pump. I saw the video by JaysTwoCents where he explains it beautifully
Exact same fans as the Silverstone PF240/360 AIOs? Just a slightly different frame.
Could applying too much pressure break the cpu pins? Asking for a friend lol
I don't have a a 3 pin RGB header (JRAINBOW ) on my MSI b450 tomahawk MAX! What should I do!!!!!!
x2
My mother board doesn’t have a j rainbow. Is there anyway I can get the rgb to work without it
I’m having the same issue. Did you find a solution?
@@jamesrugnetta4049 I have the same problem plz respond and help solve this with me
This was the best guide I could find and actually showed and explained the whole process thanks dude 🎉
This is the best video of a whole installation process. You should have way more subscribers than this.I subscribed to your channel.
That was super helpful thank you so much. I was worried I wont have enough Fan and RGB connectors on my motherboard (MSI MPG B550 Gaming Plus) but given the Daisy Chain and Fan Splitter I should be fine (as far as I understood the installation process xD)
Hey, I have the same motherboard and want to buy this AIO. Does the mobo have enough RGB connectors?
How do I Change the Color ? Do I need a Software ore Somthing like that ?
You just made this so damn easy for a noob at installing a water cooler. Thx man!!
i can’t mount the radiator onto the cpu and i’m doing the same exact steps as this video and others. it’s like an inch away from the cpu and i can’t tighten the screws. any help?
I need help with mine. I have the 240r version, and the block cooler wire is not the same at yours. I have the 4 pin female.. and I'm wondering why I have the different one
Hello i'm having some issue i bought MSI MAG Coreliquid 360 the lenght is 396mm, can i put it on a case of 360mm ?
since the fan are 120mm
I watched this even though I don't have a PC :(
Don't worry you have a company🙋
Same, it just looks so beautiful 😍
@@aspyryna yes
Scrub get gud
Be grateful
HELP! I dont have a J-Rainbow/Any 3 pin RGB connectors on my motherboard. I only have 4 Pin RGB pins, what do I do?
Same Problem
Did you figure it out?
Get a rbg hub 5v 3 pin, msi has one
Hello please help, I bought this MSI Liquid Cooler 240R, but my motherboard doesnt have Jrainbow and Pump Header on it. Where should I plug those. The only RGB header on my motherboard is the 12v RGB 4 pins. I dont know what to do. Thank you so much..
Your videos are very well thought out and helpful, thanks!
Does anyone know what fans the cooler uses so I can match them
60mm fans
The 360 is 3x120mm and the 240 is 2x120mm also
I used the 240R in the MSI Gungnir 110R case which has an ARGB hub built in that can control all 6 fans(4 case fans + 2 on the AIO). Great design and looks great with everything synced up perfectly. Highly recommend!
Hello! i am using the same things too. COuld you explain how to wire it up???? thanks. (i know this is a year old lol)
Sorry but did you connect the water block RGB to the RGB hub in the back instead of the jrainbow pins stated in the video?
I have the exact same things as you.
@@val_kyo I have 6 ARGB fans(3 intake, 2 on the top mounted AIO radiator and 1 exhausting out the back) as well as the waterblock and a custom ARGB heatsink for my M.2 SSD all connected to the ARGB hub in the back. But Idid have to add a splitter or two to fit them all.
@@kaelinmarkert5852 I ordered the 280r fans and it didn’t fit the 110r case, are you sure 240r fits perfectly??
@@CFC003 I used the Coreliquid 240R with the radiator mounted at the top. I've since upgraded to the Coreliquid S360 which can only mount in the front. Both using the Gungnir 110R case.
mounting kit is the same as lian li galahad and so as the rotating design. the pump location is definitely an interesting. I hope msi include some kind of vibration dampers for the radiator as pump will make some kind of noise due to vibration
I have a question hopefully you will answer, I don’t have a 5v argb on my motherboard since i own a b450f, theres a molex cable in the box, can i use that to power up the argb of the pump without connecting it to the mobo?
Great video man, it helps for people who want to install this AIO. Honestly the design is meh, however it's nice to see some deviation from your usual AIO such as the pump being in the radiator instead of near to the cold plate. Aesthetically, it reduces the amount of cable on the front. But I don't know if this design choice has any technical advantage over the usual pump location.
You definitely wouldn't want to put this on top. Me and many more have suffered from the issue that the pump will fail. Air rises to the top and it makes its way into the pump. So front input is probably the best and only way to get a huge lifespan from this cooler where the pump will maintain under water
@@iiSup3riorHello, I am installing one, but I have read that I have to install it with the hoses from the bottom up, to leave the pump at the bottom, the bad thing is that it looks horrible. But in this video he installs it with the hoses from top to bottom, I don't know what to do.
I had the Fractal Celsius+ S28 Dynamic 280mm cooler for a while. It also has this sub-par method for mounting to AMD. I now have the Deepcool Castle 280EX which uses the 4 thumbscrew method for mounting, which is superior to this MSI or Fractal method of mounting to an AMD motherboard. The Deepcool also has a square cold plate, instead of round one like this or the Fractal.
wish more would give us a 4 screw mounting method
Deepcool have been doing some great stuff lately.
Wow it was a very complete video thank you !there should be your video instead of the Quick installation guide in the box !
Dude the way you construct your videos is SO FUCKING HELPFUL, god bless you
I installed everything correctly and my CPU is idle at 80 Celsius and when I play games it is at 100 Celsius and then crashes.
Yo same. It's really weird especially considering it had worked well before. I'm just guessing it's missing some water, since the AIO seems to be working fine otherwise. I even reapplied the thermal paste. However, if you fixed your issue I'd be glad to know.
@@wibiz9657 mine too. ans it seems like the fans are around the wrong way causing the fans to fight each other.
@@mickpoore3326 I ended up replacing the cooler with Noctua's NH-D15 since I figured the pump was broken in the AIO. Make sure everything is working before doing the same.
Same
It's a known issue now by MSI. You can ask for a replacement by searching "MAG CoreLiquid 360R Product Announcement"
I would definitely buy this if they have a white version
Just paint it dude!
Simple
@@BHASKAR10761 painting pc parts usually void it's warranty so not gonna do it haha.
Does anything need to be plugged into the power supply or is that the end of it once you plug everything into the motherboard and daisy chain it? Asking because I’m installing the two fan one tomorrow. Thanks!
Question: I have plugged my RGB pump plug on to Rainbow 2 of my MSi z590 tomahawk wifi mb. But the MSi mystic light software will not charge the rainbow colours. It shows steady fixed colour but soon as I switched to rainbow it changes to a random flickering colour like red.
Any idea why? ??
Do I need to daisy chain the male three pin plug to a fan or something? .
Warning: They're great but unfortunately these watercooler versions from MSI have a design flaw. These are so faulty that I can't believe they are still being sold. After a few months, a grinding sound will show up every time you start your computer. Getting worse and worse with time. I bought one, sent it back, got a second one thinking maybe it was bad luck, and it did it again. If you really wish to buy one, do not install it on top like it's generally supposed to. Install it vertically on the front, and even then, I don't know, I wouldn't risk my money with these.
EDIT: Apparently it was a bad batch, pumps were getting clogged because they were producing sediment. Making them unreliable after a few months. MSI found this after an investigation. A recall was made so people could get a replacement and the V2 model was born. I guess the overheating and rattling issues got fixed but take it with a grain of salt.
yeps.. if only I red this comment. I should have bought Corsair coolers.. damn it so unlucky.. now I only used it for 6months and temp is going crazy
@@presliitagure662 Same man, but I rma‘d it and they send me a v2
@@sz7monus I fixed mine.. opened and cleaned the pump and changed the old coolant with motocycle coolant. sheeeesh! now its okay..
@@presliitagure662 do you have any details on the opening and cleaning process? like how you did it, pics or videos. My unit has started to make noise at boot. I want to open it but im afraid to ruin it. I saw theres some sort of goo inside, motorbike fluid is usually less viscous. wouldnt that create a problem for the pump? thx
Is the v2 of that liquid cooler better? Or is it the same problem
you mounted the radiator the wrong way, if u front mount it, u have to have the pipes at the bottom if u can
that is a 50/50% right or wrong answer. 50% will give you a thumbs up and the other 50% will give u a nay and will say tubes have to go from the upperside
@@IiMxMrGeitt why's that?
Seriously, just go and watch Jay's video
@@Daniel.echgoo who's that?
@@icebobk6702 ruclips.net/video/DKwA7ygTJn0/видео.html
The Q & A is very helpful! great video!
My case comes with 3 fans already do I remove them and throw them away? Do I remove them and place them somewhere else in order to put the fans that come with the aio. Just getting started with oc gaming thanks
just installed this today this video really helped especially with the wiring part.
this guide make my day.. at soon as i open and saw a lot of cables and screws my head hurt...but thanks to your video and great step by step instruciones makeit really easy...thanks and chears... 5 star video
That's a nice looking cooler. Excellent install guide as always. Congrats on 90k btw 👏 #NewPC4Klaire #RoadTo100K
Will the pump work on a old motherboard like a msi 970 or a 990? If so, where would I plug it in?
So I am using the B550-f and the only 3 pin I found was the Addressable Gen 2 Header, will this work when plugging in the rgb part for the fans?
I just ordered one of these cooler and II don;t have the AMD Retaining clips type mount on my motherboard can I mount it with screws on the other type of am4 mount the 4 screw stelth cooler way? please help weill be here in about 15 hours
I’ve installed this same cooler but I cannot get the pump to operate on PUMPFAN1 header, I have to use CPUFAN1 to get it to run. Any ideas?
Fantastic help!!!!❤ first time learning about the daisy chains too. Just have to cable manage now but extremely helpful. Thank you!!
Can you install it on a GPU? As I want to put an AIO on both. another question why are you exhausting into the case?
i have the same motherboard and have never messed w liquid cooling before so the wiring part saved my life thank you!!
I installed this cooler . But I want one more fan can u help to know model no of this fan . I want one more to set at back of my cabinet plz tell me the model of fan which we installed in front
The RGB plug from the CPU cooler block is a poor fit on the jrainbow2 connector on the motherboard. Almost feels like it's going to fall off...
I have an additional cable which consists of a male and female ARGB connector at the end of a long cable to a tiny 3 pin female connector. What's that for ?
Hi, I just built a PC with this cooler. I am using an Asus X570 Tuff Gaming Motherboard, is there any other way to get the RGB for the cooler and it’s fans to light up? The current mobo does not have J Rainbow headers.
Since the pump is in the radiator would it be better to put it standing up mounted on the front of the case?
I have an MSI B450 Tomahawk Max which doesn't have any argb headers or any 3 pin jrainbow headers. Do I just not get to have rgb fans then or is there a solution?
I just wanted to know, how does the rgb on the AIO's fans compare to the rgb on Phanteks SK120's?
Is it safe to mount it tubes up like that infront of the case because the pump in integrated into the radiator?
Very well explained video! This is my very first pc. Ive been having a hard time for almost two weeks. Just saw this video today. Took me 20minutes to hook everything up!!
Can you use the molex to pwm-fan connector? My mainboard just got 2 sys_fan and 1 cpu_fan and I have to use those for the case fans and the pump.
Question guys. The two cables from the cooler where do they go on your motherboard??? The instruction manual says it goes on a header called "JRainbow" but I don't see that header on my Asus motherboard. H971-Plus.
Can someone please let me know.
Does your pump also make a high whining noise when running over 3100 rpm? I'm thinking this might be a fault with my product. Its by far the loudest part of my system if I run it at 100%.
Very helpful Video. Only Challenge i have is: my aio head doesnt have that cable like you show. It has just 3 pin female+male cable. I connected all fan cables together and the male 3 Pin of the aio head. The female end is on the mainboard arg connection. Rgb on the head and radiator fans doesnt work like this. Any help?
This or H100i RGB Platinum? My motherboard is MSI's and I think this will be aesthetically more pleasing. Is there any difference in performance?
Exactly what I needed! Thanks for this video. I wasn't quite sure how the daisy chaining worked. My MB has 3 ARGB connectors, so this will let me put in a few Lian RGB fans as well.
i have a problem connecting all those wire properly to get to work properly, the fan will turn from the radiator but the light does not work, and the cooling pump in top of the cpu does not work either. may you give me an advice why. and my rog Strix b550 do not have Jrainbow
Using MSI B550-pro board and cant get the RGB to come on at all using any of the headers on the motherboard? Any suggestions?
Hey! I'm using the 240mm AIO and I have an MSI RGB hub that also connects to the fans. Can I plug the RGB header from the water block to the rgb hub too or should i leave it at the jrainbow pins. PLease help!