Boost Your 150cc Chinese Scooter's Speed with These 5 Expert Tips
HTML-код
- Опубликовано: 14 июл 2024
- High performance clutch set amzn.to/2S6WsNZ
42mm Air Pod Filter 150cc GY6 amzn.to/30hXtHn
Carburetor Main Jet kit amzn.to/3cHaO0M
Exhaust GY6 150cc amzn.to/3oawhVM
Spark Plug GY6 150cc amzn.to/3mVYuyt
Performance Racing Ignition Coil amzn.to/3cFwACd
GY6 Performance CDI amzn.to/3h9g7dU
High Performance Adjustable CDI amzn.to/3xYG1XJ
Chinese Scooter Service Manual amzn.to/2LBfWb8
Donate to Virberello for Parts rb.gy/gzrtit
Hello my friend in this video I will show you 5 tips to make your gy6 150cc Chinese scooter Faster and Reliable ( gy6, tatao, chinese moped , scooter ) I hope you enjoy this video if you have any question feel free to ask and thank you. 
Хобби
![BEST GY6 PERFORMANCE MOD! [Plug & Play carburetor]](http://i.ytimg.com/vi/snhUWQnFgbE/mqdefault.jpg)
I love your scooter channel. U are awesome and make everything so easy to understand on repairs
Hello Tony thank you for watching my video
Love this channel bro
You sir are a scooter genius thank you for all the help
Hello my friend thank you for watching my videos
Thanks for those tips and links very helpful
Thank you for watching my video
Thank u. Good speed tips.
Hello Ronald thank you for watching my video
Thanks Again For Your Help My Moped Guy, I Bless, And God Bless Your Family, QUAM.
You're welcome! I'm here to help. It's great to hear your appreciation. May your moped bring you safe and enjoyable rides. Blessings to you and your family as well. If you have any more questions or need further assistance, feel free to ask.
Thank you
Thank you for watching my video
Cool. I installed a BBK o my 50cc, vut the speed won't go to much above 20mph.
Put new carb and filter, new spark plug, new CDI.
It was bogging a lot, it was the bore kit that needed more torque - less compression.
But with all that it still not going above 20.
I'm gonna change the exhaust now. Hope it fixes it.
Great video. So I did everything you mentioned accept for the spark plug.
But I think you forgot to mention is the tuning of the carb. I ended up being very rich , so I had to play with the air/fuel mixture screw to get jr right , which took me a long time (also adjusting the idle screw). I think I went to big of a main jet (from 105 to 125). My screw is all the way in, and still I’m getting backfires (not as much if I screw it out).
Hello my friend thank you for watching my video
He mentions upgrading the carb, after he talks about the air filter. Its number 3.
Nice video
Hello my friend thank you for watching my video
Can you please recommend a performance muffler exhaust for my gy6 150cc Icebear hawkeye please
My Lancer has what appears to be a vacuum line from the air intake and the head and transmission. The Nibbi high performance air intake pipe doesn't have a connection for it. Is there another kit you recommend that addresses this?
Hello Jane I find the solution for you. you will need to make a small hole in the nibbi pipe or on the top of the hight flow filter and place a Brass Hose Fitting, Adapter like this 1/4" Barb x 1/8" NPT Male Pipe like this amzn.to/3fcPRMU so you can connect your hose there
My question is it possible to combine an oil cooler with one of those oil fill tube vent kits? Also there is a possibility of adding an ecotrans fuel injection system which would improve both performance and fuel economy along with an above said oil cooler however the oil cooler looks to run around 170 on the net and the fuel injection system seems to cost around a whopping 800. I have only planned on this for my 49cc 4 stroke motorised bicycle with jackshaft build. It already goes faster than my wifes icebear 50cc with me weighing 260 and her weighing only 120. But there are drawbacks to a motorised bicycle. They need constant attention and the system will eat a chain quick.
Hello David I think you can combine an oil cooler with one of those oil fill tube vent kits you just need to make the connection and at the end you need to make sure you have a oil pressure not sure what is the project but Yes
Could you please help me with my scooter? I have a 50cc with a big bore kit 100cc , the rest is stock except for the cavalier belt.
👍 ❤
I have question, I just put a new stator on my 250 4 stroke gy6, it cranks up good, runs good, the problem I am having now is, I can not go past 45 mph with throttle wide open, it does not bogg down, what do you think is the problem
Hello Robert the first thing that came to my mind is a dirty air filter try to disconnect the house in the back side of the carburetor and go for a test ride for 1/2 mile and see if you have a change in performance but if you change the stator could be that the new stator at high RPM is not performing the same way like the old stator . I hope this can help you
Tip (6) 😁 add a 6sigma Nitrous Oxide kit. This kit delivers instant power at the push of a button. But before using the 6sigma N20 kit please follow all of Virberello's advice. (Virberello you should test out this product). Tons of fun, it gives you that extra power when you need it😉
Hello my friend great idea and thank you for watching my video
Damn. You have perfect hair.
I don't even need hair spray or gel in the morning ah ah ah
Hello great video, with regards to the CDI, what other brand do you recommend, unfortunately the one you recommend is not available..Thanks. George
Hello George try this amzn.to/2QZ8lZy look like they have a lot Thank you for watching my video and be safe
Thanks, are you located in Florida?
So I picked one up to mess around on. I want to just. Make it a hold my beer rig. So. I’m tryna get it to have more torque. Get some wheelies done on it. ?
if u cant afored a better muffler or just take a brill somthing that can cut metal and open up ur stock exost bigger but custing a biger hole in it
I have the wolf rugby 2
150cc I’m going to upgrade the air filter and delete the stock but the stock air box has 3 hoses hooked to it can I remove them and just plug them or will that not work
Hello better do not plug the hoses because you can build to much pressure in the motor for sure one hose coms from the head valve cover and you can place a small filter at the end and the second should be from the recirculating exhaust fumes and that can go to open air and the last one should be the large hose for the filter
Thank you for the quick response and the great videos
I bought everything you said in your video now just waiting to put it all in
What size jet should I use on my 150cc if I have a free flow Exhaust, nibbi intake, nibbi carburetor and A9 camshaft?
Hello my friend if you are at sea level you can place a 120 or 125 main get the higher altitude the smaller jet you will need. Thank you for watching my video
So will all these parts work on a 2017 toe toe 150 vip???
Hello Yes this parts will be great just make sure your motor say 157qmj
Are you still into scooters? I’d like to enhance a 150cc ASAP!
Hello yes feel free to visit my channel where you can find lots of video on how to enhance a 150cc
Got a 150cc I cannot go past 40mph with throttle fully open either and it runs like a 125cc any tips on how to get full performance more speed and getting pass 40mph
Hello Ryan change your mail jet 1 or 2 size bigger change your weight rollers at the variator 2 step lighter and you will start to feel more speed . Thank you for watching my video
I have a 150cc longbo adventure05 and. Mine does 70 and all i did was put a freeflow fuelfilter on there,like a reusable metal filter and a new carb nothing special and that stuby metal air filter but you can always play around with the fuel/air ratio
Automatic choke does not activate in cold engine. What is the reason? How do I set it.?
Hello you will need to test choke ruclips.net/video/gjFLZNqX97A/видео.html
You looking younger and younger !
I’m wondering Hooooowwwwwwwwww?
Hello Boma I like the younger and Younger look ah ah ah in realty my son toll me to do his diet and I lost 45 pounds in 3 months and I feel lighter and healthier at the moment . Thank you for watching my video and be safe
virberello GY6 Scooter Tips
I love the energy brother,
Love the videos and great job to your son !
I’m gonna keep watching your videos so I can know
Howwwwwwwwww !
Have a great day hermano
Now I need more info on the diet.....
@@charlestaylor3544 is an App on the phone called my fitness pal is free do not need to pay for upgrade just track your food and count your calories and stay lower then 2100 calories per day taking in consideration how toll you are and how old you are you need to calculate that on calorie calculator on line
Thank you. Your scooter videos are very helpful also!
roughly how much faster would a chinese 150 cc scooter go with these upgrades? from 40 MPH to ??? MPH. Thanks
Hello my friend you will get more or less an extra 12 to 15 extra miles by doing all this things . Thank you for watching my video
Hello,please I need your helper my scooter is cc150,the problems is I can start but can't go faster like before when I start I have to waiting like 10 minutes running then go slowly and poorly for 100 meters or more then will start get faster,real I don't know what is problem up to now.
Hello Paul I will check the roller weight in the back side of the variator to see if they are worn and if you need to replace them after that if the weights look good I will adjust the valve clearance. I hope this can help you and thank you for watching my video
The link that you have for the high performance exhaust doesn’t open, can you update the link or can you recommend one? Thanks!
Hello George I just update the link amzn.to/3oawhVM I had this Performance Racing Exhaust Muffler Pipe on my scooter and it works good but because is a free flow is a little more makes a little more noise but you can always buy a silencer but at that point you will lose a little more performance
@@VirberelloScooterTips awesome my friend thank you so much, I have a question, is the muffler aluminum, does it weigh a lot? On my current scooter TaoTao Quantum Tour 150cc I have an small aluminum exhaust, I don’t believe it will help me with performance..
@@georgeecheverri5452 Yes I think that is aluminum and is lighter then the original exhaust the only thing I had to slightly bend the Front Header Muffler Exhaust Pipe because was not matching perfectly so if you feel little resistance or if you see that the lower bolts are not matching do not forced in so remove the exhaust and slightly bend the front but after that no problem was a little loud but lots of fun
@@VirberelloScooterTips thank you my friend,I appreciate all your advice, I purchased everything that you recommended hopefully I should see an improvement, I’ll keep you posted.
Hope everything is going well with you I do have two questions for you, regarding the spark plug iridium, unable to fine spark plug i’ve checked discount auto and AutoZone with no success, do you know of a place where I could go to purchase one? I don’t trust items online due to counterfeit. Second question, on the video the rollers that you show is of 12 g and in the link in Amazon they’re 14 g Will this be an issue?
Hi you have a video for scooter suspension my suspension is really hard
Hello my friend no I did not made that video yet . but do you have nitros can sunspension ? Thank you for watching my video
After how many kilometers should we replace a drive belt ?
3000 k will be better 👍
Do you have a shop, I would bring my 150cc to you ASAP
Hello no I do not have a shop one day I will open one that could be a good idea
Open that bike shop brother
where can i find all does parts for my scooter 110 cc honda lead,its not fast enofh bro
Hello Daniel I buy everything on Amazon
Good day I got the same scotter just different name 2021. I would like to get the front nose and other body parts and accessories. Can you help me with a website you can share.
Hello my friend check this partskit.com and thank you for watching my video
I have a 50cc trike moped how do i make it faster
The best way to make a 50cc go faster is to place a big boar kit but keep in mind that if you change that your scooter will only last one more year
Thanks for the info and links. What size main jet would you recommend for 125cc GY6?
Hello my friend I think #105 main jet should be great . Thank you for watching my video
@@VirberelloScooterTips Many thanks
So just to be sure. If I take the stock air box off then I have to switch to a 120 main jet?
Hello my friend yes you give more air to your motor now the motor want more juice 120 will perfect are sea level . Thank you for watching my video
@@VirberelloScooterTips so I changed the main jet to a 120 and it now bogs out when Im at full throttle and when I go above 40.
Try 115
my scoter lose timing 180 degrees out i pit it bet on timing and try to start it and out a gen 180 degrees
If your scooter's timing is 180 degrees out, it means that the ignition timing is off by half a revolution, which can cause the engine to run poorly or not at all. Here are the steps you can follow to correct the timing:
Remove the spark plug from the engine to make it easier to turn the crankshaft.
Locate the timing marks on the engine's flywheel and the engine casing. The timing marks are usually indicated by a line or notch on each component that needs to be aligned for correct timing.
Rotate the engine's flywheel in the direction of normal rotation until the timing marks are aligned as indicated in the manufacturer's service manual for your scooter's model.
Check the position of the camshaft and the crankshaft to ensure that they are aligned properly. They should be in the correct position as specified in the service manual.
Reinstall the spark plug and try starting the engine.
If you have correctly set the timing, the engine should start and run smoothly. If the engine still runs poorly or does not start at all, it is possible that there may be other issues that need to be addressed, such as a problem with the carburetor, spark plug, or other components. In that case, it may be best to have a qualified mechanic diagnose and repair the issue.
I got wolf ruby ll 150cc my top speed is 53 mph the owner said i can do 60mph and im light weight around 147 pounds so its not my weight how can i get mine 150cc to at least 65mph
Hello my friend change the variator roller weight to 16 grams amzn.to/47eawt1 you will lose a little torque but you will gain more top speed
@@VirberelloScooterTips thanks buddy I love ur channel by the way great tips and thanks for ur time teaching us
hello my friend i like you so much 🥰🥰❤️
Hello my friend thank you for watching my video
@@VirberelloScooterTips
you are a ropot why you every time you say to me that words 😡
try something different ☺️☺️
My friend love your videos how do i increase thr weight for 150 cc so i can have big girls on thr back lol
Hello James thank you for watching my video
U can. Use. Up. To a 125main jet. In. The. 150. And. Switch. The. Fuel fuel. From. To. Top to bottom high air flow. Air flir. And. Make. A. Snorkel. Trust. Me. And. It sound. Like. A. Best. If. U. Want pic. Of. The snorkel. Let me know
Great Idea thank you for watching my video
Could you do a video on 50cc please ? 😄
Most of what he said in the video seems like it would apply. However if i had to guess about the carb jetting ... A 50cc is 1/3 a 150cc so instead of a 120 wouldnt it be a 40 for a 50cc engine?
David King I mean that makes sense but I recently had my carb apart on my 50cc and it had an 85 main jet it I think
Yea I have 50cc Honda Today (AF61E) has #80 mainjet
No buy a bigger one
@@joeybomba8856 that was ages ago lmao I got a geared 125 now
OK, but this 5 it's need a lot of money in my country l'm from egyot
I weigh 250# ...I'm going to install 10 gram rollers with a gates belt ...Your thoughts ?
I am the same weight 15grams worked best for me lighter ones had bad acceleration
@@vinnyrider88 Now if you shared your scooter with say a 120 pound person how would 15 gram rollers effect their ride? Better or worse? I weigh 260 of that makes any difference?
Hello Clifford I like 10 gram roller but sometime I feel little to much vibrations so I change to 12 grams and I like them a little better and my weight is 245, Thank you for watching my video
@@DavidKing-wk1ws I am not sure but I think the more you weigh even with a passenger the heavy roller weights are better for acceleration and top speed. I tried 12g and they definatley made it slower take of speed with higher rpms so when people say lighter weights are better I disagree
Best advice David is to get a performance air filter and exhaust they will add the most hp and acceleration will be way more noticeable.
Can i get my scooter faster without an airflow ?
Hello Clash change the roller weight to 12 g upjet the carburator main jet to #118 if you are at sea level and thats all . thank you for watching my video
Plain and simple
Hello Karim thank you for watching my video
@@VirberelloScooterTips thank you for sharing
If you're going to do all of this and spend that much money you should have just got a honda or yamaha to begin with.
The prices of the part of gy6 are very affordable but I agree with you Honda and Yamaha are great quality scooters
Or leave home some minutes earlier.
great idea
Just get a new 🏍
Hello Pecky Arvizu you right ah ah ah but some people can not afford an expensive motorcycle so they buy what they can afford and I'm here to help them .Thank you for watching my video
I have a 50cc trike moped how do i make it faster
The most effective method to increase the speed of a 50cc scooter is to install a big bore kit, but it's important to note that doing so may reduce the scooter's lifespan by approximately one year.