CATIA V5 - Check Clashes, Clearances and Contact

The case study model can be found at:
grabcad.com/li...
To check for clashes, clearances, and contact in CATIA V5, you can use the *Check Clash* tool. This tool can be found in the *Analyze* menu.
To use the *Check Clash* tool, follow these steps:
1. Go to *Analyze* - **Clash**.
2. In the *Check Clash* dialog box, select the type of clash that you want to check. You can choose from **Contact**, **Clash**, or **Clearance**.
3. If you are checking for clearance, you need to specify the clearance distance.
4. Select the objects that you want to check. You can select multiple objects by holding down the *Ctrl* key while you click on them.
5. Click on the *Apply* button.
The *Check Clash* tool will display a list of any clashes, clearances, or contacts that it finds. You can then use this information to modify your design as needed.
Here are some additional tips for using the *Check Clash* tool:
* You can use the *Filter* button to filter the results of the clash analysis. For example, you can filter the results to only show clashes between certain types of objects.
* You can use the *Preview* button to preview the results of the clash analysis before you apply it. This can be helpful to make sure that you are getting the results that you want.
* You can use the *Results Window* to view more detailed information about the clashes, clearances, or contacts that were found.