Do you have any shots/recordings of how the model looks when printed out? I'm strongly considering this, but I'd like to see how it looks "au naturele," before I commit.
We are grateful for your interest in Robotech Valkyrie 3D Printing Model, and we value your considerate approach before purchasing the model. When following the next links you will find the images of finished 3D prints of the Robotech model: www.gambody.com/image/701/c40e_980x500.png, www.gambody.com/image/701/0258_980x500.png, www.gambody.com/image/701/ebf3_980x500.png. These pictures are deployed on the model’s page in the image preview section, just check out the Veritech Fighter’s page to learn more about the model: www.gambody.com/3d-models/macross-robotech. In case the marvellous pics of super-accurate 3D prints did inspire you to take up the project asap, you can grab the model at a fancy price. If you’re new to the marketplace, you can make the best use of “New Customers Double Exclusive’. This lucrative offer enables you to have up to 30%off and 50% of credits back to your account, see more here: www.gambody.com/blog/new-customers-double-exclusive/. For any additional info, reach out to us at support@.gambody.com or via Facebook messages.👍
Hello there! May I ask how well the Pla pins hold the joints? Are they loose? Would it be better to pin with metal rods? Would screws be an option? Thank you for your time.
Hello, and thank you for revealing your interest in Robotech 3D Printing Model as well as your mindful approach towards the robot’s assembly. Well, indeed on the model’s page in the “Description” tab, we suggest that the model should be assembled with 1.75 PLA pins (www.gambody.com/3d-models/macross-robotech). On the same tab, you can see that the suggestion applies to the updated version of the model, the FFF/FDM 2.0 version. The model can be assembled without glue or screws but you will need additional “pins” to secure the parts. In the assembly video, the suggested pins are coloured yellow. You see, the 1.75 PLA pins proved to be the most optimal variant enabling most enthusiasts to obtain a satisfactory result and good hold. However, that would be a mere recommendation, not an obligation, and upon your wish, you can choose other suitable material you’re used to working with. In case you have any alternative at your disposal that ensures firmer hold, for instance, you surely can go for screws, upon your wish. In case you need more details or have extra questions, we will gladly assist you once you reach out to us at support@gambody.com or via Facebook messages.🤗
Thanks for your feedback! We appreciate you pointing out the crossbones detail. Could you elaborate more on what specifically about the crossbones doesn't quite fit the Robotech VF-1 aesthetic in your mind? Your input will help our Moderation Team understand how to potentially improve the model for future updates. We look forward to hearing from you!
@@Gambody_combecause I want to use this to make G1 Jetfire, a famous use of the classic vf1s toy I'd just need a variant of the super booster packs that has the skull and crossbones flat, or replaces it with the autobot insignia.
@@eobardthawne3333 Thanks for clarifying your vision! Our Moderation Team is happy to explore the possibility of a variant with a flat surface or Autobot insignia replacing the skull and crossbones. To add this request to our Team's work plan, please email us at support@gambody.com and attach a copy of this message. Remember, when you purchase a model from the Gambody marketplace, you not only get access to top-notch, high-poly 3D printable STL files, but you also get lifetime technical support, seamlessly included in the price of the model. Whether you have specific customization needs or need assistance with adjustments, we're here for you.
Hello! Thanks for getting in touch with us. Hope you stay as safe and healthy as possible! We are truly sorry for any inconvenience you have experienced trying access our site. We welcome all customers without exception who face difficulties accessing Gambody marketplace contact us directly - by writing to our Customer Support Department at support@gambody.com so that our team could provide you with further information and assist in finding a possible solution.
Hola me encanto la figura, puedo sugerir hacerle la placa de proteccion con el simbolo del escuadron SKULL y otra normal que lleva en el pecho en el modo BATTROID, me gustaria comprar el diseño. Muy buen trabajo 10/10....
Thanks for your comment! We've double-checked, and the thumbnail does indeed feature the Robotech VF-1 "Super Veritech" Valkyrie as intended. Feel free to inquire if you need more details. Thank you for your understanding!
Thank you for stopping by and revealing your interest in Gambody marketplace as well as voicing your ideas as for the model you favour. Upon your inquiry, we have added SDF-1 Macross to the Wishlist of 3D printing models we have. The models from this catalogue are then offered to our contributing 3D artists as possible future 3D projects. 👍From your part, you can also take part in the survey we have and increase the chances of the characters/objects to your liking to appear on the marketplace, the poll is here: goo.gl/forms/vcedoRHt7orI2eTZ2.
Hello, and thank you for revealing your interest in the Robotech VF-1 "Super Veritech" Valkyrie 3D Printing Model. You can find the STL files the robot comprises on the model’s page on Gambody marketplace: www.gambody.com/3d-models/voltes-v. In case you’ve run into any sort of difficulty trying to access the marketplace and purchase your chosen model, please no worry. We always welcome all the customers without exceptions who face any issues when dealing with our site to contact our representatives directly. Please, reach out to us either via FB messages (facebook.com/Gambody) or send an email at support@gambody.com and our Support Team will gladly assist you. 🤗
Thank you for stopping by and for revealing your interest in the Gambody marketplace as well as for letting us know about the models you’re searching for. Well, for the time being, in the anime-inspired section you can find varied Robotech-prompted models (www.gambody.com/3d-files/anime), yet we don't have the Veritech Hover Tank 3D printing model yet. Striving to enlarge the catalogue of 3D printing models we happen to display, we always take into consideration the wishes and ideas of our customers.😉 That way, we have added the suggested Veritech Hover Tank to our Wishlist, to offer it to our contributing 3D designers. Also, you can vote for the characters/objects you fancy and boost their chances to appear on the marketplace by taking the survey with the next link: goo.gl/forms/vcedoRHt7orI2eTZ2. For more information, get in touch with us at support@gambody.com or via Facebook messages.🤗
MAKURO no sora o tsuranuite Chikyuu o utta ikazuchi wa Warera osanai jinrui ni Mezamete kure to hanatareta MAKUROSU MAKUROSU Ooshiku tatta wakamono wa Ai suru hito o kabaitsutsu Tabidatsu hibi o tatakai hiraku Will you love me tomorrow Yami o kirisaki tobi yuku saki wa Tooku kagayaku aoi hoshi MAKUROSU MAKUROSU MAKUROSU
Thank you for revealing your interest in Robotech VF-1 3D printing model and inquiring about possible printing peculiarities. Generally, when it comes to the filament choice, from our part we do not provide any requirements/suggestions of the possible manufacturer/colour of the printing material you might use. Going by the feedback provided by our customers, in the majority of the cases, the enthusiasts tend to use 1.75 PLA materials of grey colour. For what concerns the instructions for the Robotech VF-1 3D printing model, then when downloading any file of the model you will also receive the guide on how to assemble this version in a PDF file "Assembly Manual". For you to be able to discover more practices of utilizing filament choices of various colours as well as see the high quality of the finished models, we’re glad to invite you to our “Gambody - 3D Printing Community” (facebook.com/groups/183216945475583/). If you have additional questions, please contact us directly at support@gambody.com or via Facebook messages.🤗
Damn yo... You did an outstanding job!
Does each piece require supports in the print?
Do you have any shots/recordings of how the model looks when printed out? I'm strongly considering this, but I'd like to see how it looks "au naturele," before I commit.
We are grateful for your interest in Robotech Valkyrie 3D Printing Model, and we value your considerate approach before purchasing the model. When following the next links you will find the images of finished 3D prints of the Robotech model:
www.gambody.com/image/701/c40e_980x500.png,
www.gambody.com/image/701/0258_980x500.png,
www.gambody.com/image/701/ebf3_980x500.png.
These pictures are deployed on the model’s page in the image preview section, just check out the Veritech Fighter’s page to learn more about the model: www.gambody.com/3d-models/macross-robotech.
In case the marvellous pics of super-accurate 3D prints did inspire you to take up the project asap, you can grab the model at a fancy price. If you’re new to the marketplace, you can make the best use of “New Customers Double Exclusive’. This lucrative offer enables you to have up to 30%off and 50% of credits back to your account, see more here: www.gambody.com/blog/new-customers-double-exclusive/. For any additional info, reach out to us at support@.gambody.com or via Facebook messages.👍
Podrías proporcionarme el STL y cuál sería el costo?
Hello there! May I ask how well the Pla pins hold the joints? Are they loose? Would it be better to pin with metal rods? Would screws be an option? Thank you for your time.
Hello, and thank you for revealing your interest in Robotech 3D Printing Model as well as your mindful approach towards the robot’s assembly. Well, indeed on the model’s page in the “Description” tab, we suggest that the model should be assembled with 1.75 PLA pins (www.gambody.com/3d-models/macross-robotech). On the same tab, you can see that the suggestion applies to the updated version of the model, the FFF/FDM 2.0 version. The model can be assembled without glue or screws but you will need additional “pins” to secure the parts. In the assembly video, the suggested pins are coloured yellow. You see, the 1.75 PLA pins proved to be the most optimal variant enabling most enthusiasts to obtain a satisfactory result and good hold. However, that would be a mere recommendation, not an obligation, and upon your wish, you can choose other suitable material you’re used to working with. In case you have any alternative at your disposal that ensures firmer hold, for instance, you surely can go for screws, upon your wish. In case you need more details or have extra questions, we will gladly assist you once you reach out to us at support@gambody.com or via Facebook messages.🤗
this would make a great g1 jetfire, eceppt for the crossbones
Thanks for your feedback! We appreciate you pointing out the crossbones detail. Could you elaborate more on what specifically about the crossbones doesn't quite fit the Robotech VF-1 aesthetic in your mind? Your input will help our Moderation Team understand how to potentially improve the model for future updates.
We look forward to hearing from you!
@@Gambody_combecause I want to use this to make G1 Jetfire, a famous use of the classic vf1s toy I'd just need a variant of the super booster packs that has the skull and crossbones flat, or replaces it with the autobot insignia.
@@eobardthawne3333 Thanks for clarifying your vision!
Our Moderation Team is happy to explore the possibility of a variant with a flat surface or Autobot insignia replacing the skull and crossbones. To add this request to our Team's work plan, please email us at support@gambody.com and attach a copy of this message.
Remember, when you purchase a model from the Gambody marketplace, you not only get access to top-notch, high-poly 3D printable STL files, but you also get lifetime technical support, seamlessly included in the price of the model. Whether you have specific customization needs or need assistance with adjustments, we're here for you.
buenas otra pagina para ver el producto ya q en peru no se peude ver esa pagina
site not available in argentina?
Hello! Thanks for getting in touch with us. Hope you stay as safe and healthy as possible!
We are truly sorry for any inconvenience you have experienced trying access our site. We welcome all customers without exception who face difficulties accessing Gambody marketplace contact us directly - by writing to our Customer Support Department at support@gambody.com so that our team could provide you with further information and assist in finding a possible solution.
Hola me encanto la figura, puedo sugerir hacerle la placa de proteccion con el simbolo del escuadron SKULL y otra normal que lleva en el pecho en el modo BATTROID, me gustaria comprar el diseño. Muy buen trabajo 10/10....
That's actually a strike valkyrie on the thumbnail
Thanks for your comment! We've double-checked, and the thumbnail does indeed feature the Robotech VF-1 "Super Veritech" Valkyrie as intended.
Feel free to inquire if you need more details. Thank you for your understanding!
Nice, can you make SDF-1 TV series 3D printing. Thanks
Thank you for stopping by and revealing your interest in Gambody marketplace as well as voicing your ideas as for the model you favour. Upon your inquiry, we have added SDF-1 Macross to the Wishlist of 3D printing models we have. The models from this catalogue are then offered to our contributing 3D artists as possible future 3D projects. 👍From your part, you can also take part in the survey we have and increase the chances of the characters/objects to your liking to appear on the marketplace, the poll is here: goo.gl/forms/vcedoRHt7orI2eTZ2.
Hola... tienes este modelo a la venta... me gustaría poder imprimirlo donde lo puedo descargar ??
Hello, and thank you for revealing your interest in the Robotech VF-1 "Super Veritech" Valkyrie 3D Printing Model. You can find the STL files the robot comprises on the model’s page on Gambody marketplace: www.gambody.com/3d-models/voltes-v. In case you’ve run into any sort of difficulty trying to access the marketplace and purchase your chosen model, please no worry. We always welcome all the customers without exceptions who face any issues when dealing with our site to contact our representatives directly. Please, reach out to us either via FB messages (facebook.com/Gambody) or send an email at support@gambody.com and our Support Team will gladly assist you. 🤗
hi i need the veritech hover tank 3d model, can you help me with that?
Thank you for stopping by and for revealing your interest in the Gambody marketplace as well as for letting us know about the models you’re searching for. Well, for the time being, in the anime-inspired section you can find varied Robotech-prompted models (www.gambody.com/3d-files/anime), yet we don't have the Veritech Hover Tank 3D printing model yet. Striving to enlarge the catalogue of 3D printing models we happen to display, we always take into consideration the wishes and ideas of our customers.😉 That way, we have added the suggested Veritech Hover Tank to our Wishlist, to offer it to our contributing 3D designers. Also, you can vote for the characters/objects you fancy and boost their chances to appear on the marketplace by taking the survey with the next link: goo.gl/forms/vcedoRHt7orI2eTZ2.
For more information, get in touch with us at support@gambody.com or via Facebook messages.🤗
no esta el archivo sube a mega o a otro medio porfa
MAKURO no sora o tsuranuite
Chikyuu o utta ikazuchi wa
Warera osanai jinrui ni
Mezamete kure to hanatareta
MAKUROSU MAKUROSU
Ooshiku tatta wakamono wa
Ai suru hito o kabaitsutsu
Tabidatsu hibi o tatakai hiraku
Will you love me tomorrow
Yami o kirisaki tobi yuku saki wa
Tooku kagayaku aoi hoshi
MAKUROSU MAKUROSU MAKUROSU
Does the instructions include the filament color to be used by part? Thanks.
Thank you for revealing your interest in Robotech VF-1 3D printing model and inquiring about possible printing peculiarities. Generally, when it comes to the filament choice, from our part we do not provide any requirements/suggestions of the possible manufacturer/colour of the printing material you might use. Going by the feedback provided by our customers, in the majority of the cases, the enthusiasts tend to use 1.75 PLA materials of grey colour. For what concerns the instructions for the Robotech VF-1 3D printing model, then when downloading any file of the model you will also receive the guide on how to assemble this version in a PDF file "Assembly Manual". For you to be able to discover more practices of utilizing filament choices of various colours as well as see the high quality of the finished models, we’re glad to invite you to our “Gambody - 3D Printing Community” (facebook.com/groups/183216945475583/). If you have additional questions, please contact us directly at support@gambody.com or via Facebook messages.🤗